Comark COMBT1 Manual
Comark
Ikke kategoriseret
COMBT1
Læs gratis den danske manual til Comark COMBT1 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Comark COMBT1, eller vil du spørge andre brugere om produktet?
Side 1/3
Bluetooth Logger
Operating Instructions for COMBT1
Charge your data logger
Your data logger will arrive partially charged. For optimum performance, charge it for 24 hours before use until no battery symbol is
displayed. Please use the USB cable provided.
The symbols below show the various battery states:
Battery OK/charged Battery low Battery charging
No symbol displayed Solid Flashing
Download and Install APP from the Google Play Store
The Comark Bluetooth Logger is programmed and stored data is viewed via the Comark Android™ Bluetooth App. There is no
traditional PC software, all programming, downloading, interrogating and sharing of data is controlled by the App.
To install, search for Comark Bluetooth Logger on the Google Play Store on your phone and follow the instructions below to
activate.
Operation of the App
Once installed, open the Comark Bluetooth Logger App by clicking on the icon on your phone or tablet.
A screen will appear if
Bluetooth is not activated
on your device. Click Yes
to turn Bluetooth on.
Continue with set up.
Swipe the screen left to
access the next dialog
screen.
Operation of the App (continued)
Pairing the App and the Data Logger
Changing the PIN code for your data logger
Each new Bluetooth Logger has the default Bluetooth PIN code of ‘1234’.
Should you wish to activate a new PIN code, click on the grey padlock icon in the top right hand corner of the screen.
Enter your new 4-digit code, then press and hold the blue lock button to save.
Note: If you have more than one Bluetooth Logger Comark recommends that the password on all is the same.
Press the button on
the logger to activate
Bluetooth and press scan
on the App.
When the connection
is established, click
continue.
Once the logger is found,
click on it to begin setup.
The default Home Page
for your data logger is the
current reading screen.
Swipe left to access the
control logger screen to
set up or stop the logger,
download logger or view
current status.
Setup Logger
Click on Setup Logger to reveal the setup
screen.
Click on the sections one by one until the setup
is complete.
Press Start to send the settings to the
Bluetooth Logger. Logging will commence and
the App will return to the Home Page.
Stop Logger/Download Data
Click the Stop Logger icon.
Click Yes to continue to stop the logger. In order to download the data
logging must be stopped.
At the help message, click Continue and the data will be displayed on screen
as a graph with a number of statistics at the bottom. (These may scroll off
the page depending on the size of the screen).
To restart logging, click on the left arrow at the top of the screen, return to
the Control Logger section, where you can immediately setup and begin
logging again.
Produkt Specifikationer
| Mærke: | Comark |
| Kategori: | Ikke kategoriseret |
| Model: | COMBT1 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Comark COMBT1 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Comark Manualer
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
20 August 2024
Ikke kategoriseret Manualer
- Allied Telesis
- Vivo
- Heusinkveld
- Kali Audio
- DPA
- Rocket Espresso
- Dave Smith
- Sagemcom
- SoundLAB
- DAS Audio
- Cuggl
- Platinum Tools
- Intellinet
- Teltonika
- Ashly
Nyeste Ikke kategoriseret Manualer
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025