Crown DriveCore Install 4|600 Manual

Crown Modtager DriveCore Install 4|600

Læs gratis den danske manual til Crown DriveCore Install 4|600 (36 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 75 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 38 anmeldelser. Har du et spørgsmål om Crown DriveCore Install 4|600, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/36
Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your local Crown Distributor. If you need
assistance locating your local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during
installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have occurred. To obtain the latest
version of this manual, please visit the Crown website at www.crownaudio.com.
Trademark Notice: Com-Tech, BCA, Crown, Crown Audio, Amcron and Multi-Mode are registered trademarks of Crown International. DriveCore, DriveCore Install,
IQwic, PIP and PIP2 are trademarks of Crown International. Other trademarks are the property of their respective owners.
Some models may be exported under the name Amcron®
© 2013 by Harman International ®, Inc. 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A. Telephone: 574-294-8000
DCi 2|300
DCi 4|300
DCi 8|300
DCi 2|600
DCi 2|1250
DCi 4|600
DCi 4|1250
DCi 8|600
DCi Series – Analog Input Models
Operation Manual
5040449 - 11/15
DCi Series Power Amplifiers
Operation Manual
page 2
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus that produce heat.
9. Do not defeat the safety purpose of the Grounding-type plug. A
polarized plug has two blades with one wider than the other and
should not be used with this product. A grounding-type plug has two
blades and a third grounding prong and is the proper plug for this
product. The wide blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15. Use the mains plug to disconnect the apparatus from the mains.
16. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
17. DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING
AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, ARE PLACED ON THE EQUIPMENT.
18. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN
READILY OPERABLE.
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP COVER. NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE
AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE
AC RECEPTACLE. THE MAINS PLUG OF THE POWER SUPPLY CORD
SHALL REMAIN READILY OPERABLE.
WATCH FOR THESE SYMBOLS:
The lightning bolt triangle is used to alert the user to the risk of electric
shock.
The exclamation point triangle is used to alert the user to important
operating or maintenance instructions.
IMPORTANT
DriveCore Install Series amplifiers require Class 2 output wiring.
MAGNETIC FIELD
CAUTION! Do not locate sensitive high-gain equipment such as
preamplifiers or tape decks directly above or below the unit. Because this
amplifier has a high power density, it has a strong magnetic field which can
induce hum into unshielded devices that are located nearby. The field is
strongest just above and below the unit.
If an equipment rack is used, we recommend locating the amplifier(s) in
the bottom of the rack and the preamplifier or other sensitive equipment at
the top.
Important Safety Instructions
FCC COMPLIANCE NOTICE
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the follow-
ing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Produkt Specifikationer

Mærke: Crown
Kategori: Modtager
Model: DriveCore Install 4|600

Har du brug for hjælp?

Hvis du har brug for hjælp til Crown DriveCore Install 4|600 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Crown Manualer

Crown

Crown DCi 8|300N Manual

24 August 2025
Crown

Crown DCi 4|2400N Manual

24 August 2025
Crown

Crown DCi 4|1250 Manual

24 August 2025
Crown

Crown DCi 2|300 Manual

24 August 2025
Crown

Crown I-Tech 5000HD Manual

24 August 2025
Crown

Crown DCi 4|300DA Manual

24 August 2025
Crown

Crown DCi 4|1250N Manual

24 August 2025
Crown

Crown DCi 8|600DA Manual

24 August 2025
Crown

Crown DCi 4|600 Manual

24 August 2025
Crown

Crown DCi 4|600DA Manual

24 August 2025

Modtager Manualer

Nyeste Modtager Manualer

Inday

Inday HDDA-1 Manual

1 Oktober 2025
Inday

Inday HDDA-2 Manual

1 Oktober 2025
Shinybow

Shinybow SB-3702 Manual

1 Oktober 2025
Ground Zero

Ground Zero GZCA 3000X.M1 Manual

1 Oktober 2025
Ground Zero

Ground Zero Competition GZCA 13000.M1 Manual

1 Oktober 2025
Elysia

Elysia Skulpter 500 Manual

30 September 2025
Elysia

Elysia Skulpter Qube Manual

30 September 2025
Bose

Bose Veritas 1100BH Manual

30 September 2025
August

August MR230 Manual

30 September 2025
Comprehensive

Comprehensive CDA-1218GAE Manual

30 September 2025