CTA Digital ADD-BOX Manual


Læs gratis den danske manual til CTA Digital ADD-BOX (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om CTA Digital ADD-BOX, eller vil du spørge andre brugere om produktet?

Side 1/1
ADD-BOX
SUPPORT@CTADIGITAL.COM
Locking Box Add-On
for CTA Digital Floor Stands
Package Contents:
Instructions:
1.Installing the Locking Box to the Floor Stand Pole
2.Adjusting the Locking Box Position
1.Remove gooseneck from base. This may require removing Y screw.
2. l b at top of pole. Place ocking ox over top of metal connection Be sure that the Locking Box is on the
opposite side of the pole as the Y screw on the gooseneck.
3. Reattach g ooseneck, then turn Y screw clockwise to tighten the connection.
1.Rotate the grip counter of the anti-
clockwise to loosen the inner pole,
adjust the height of the inner pole to,
adjust the locking box height, then
tighten the grip counter again.
2.Loosen the Y screw and ooseneck,g
rotate the ocking ox to adjustl b
the angle, then tighten the ooseneck g
and Y screw again.
Maximum Weight Loading:10lbs/5.0kgs
This product allows you to
lock the box (lock not included).


Produkt Specifikationer

Mærke: CTA Digital
Kategori: Ikke kategoriseret
Model: ADD-BOX

Har du brug for hjælp?

Hvis du har brug for hjælp til CTA Digital ADD-BOX stil et spørgsmål nedenfor, og andre brugere vil svare dig