CTA Digital PAD-CHKB Manual

CTA Digital Ikke kategoriseret PAD-CHKB

Læs gratis den danske manual til CTA Digital PAD-CHKB (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 13 anmeldelser. Har du et spørgsmål om CTA Digital PAD-CHKB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Premium Thin Profile Floor Stand

with Security Enclosure

PAD-CHKB / PAD-CHKW

INSTRUCTION - MANUAL

888-733-4448

CONTENTS:

M5 Nut

M5x12 (4)

M5 Allen Key

Metal Anchor

1. INSTALLING BASE:

ALIGN BASE PLATE (B) WITH THE BODY (A) AND

ROTATE IN SCREWS (G) FROM THE BOTTOM USING THE PROVIDED

ALLEN KEY TOOL (H) AND RELATED HARDWARE NEEDED.

2. SETTING UP

CABLE ROUTING

INSTRUCTIONS:

SLIDE IN THE POWER CORDS

AND ANY OTHER CORDS THAT

WOULD NEED TO BE

CONNECTED TO THE TABLET

THROUGH THE BODY AS

SHOWN. THERE WILL BE GAPS

AT THE TOP AND BOTTOM FOR

THEM TO ROUTE OUT TO THE

POWER SOURCE AND TO THE

DEVICE

**Wire and Cord for Illustration

Purposes Only and Not Included

Foam Adapter & Sheet Bundle

888-733-4448

3. MOUNTING ENCLOSURE TO VESA PLATE

ALIGN THE VESA HOLES ON THE

ENCLOSURE (C) WITH THE VESA MOUNT

ON THE BASE BODY (A). USING THE

SPECIAL ALLEN KEY (H), ROTATE IN

SCREWS (F) FROM THE BACK WHILE

HOLDING THE HEX NUTS (E) FROM THE

FRONT WITH FINGERS. SCREW IN UNTIL

SECURELY TIGHTENED. REPEAT FOR ALL

(4) SCREWS.

F HAE

(OPTIONAL) BOLTING FLOOR STAND DOWN

USING A POWERDRILL OR SIMILAR (NOT PROVIDED) THAT IS THE SAME

SIZE AS YOUR METAL ANCHOR - CREATE A CAVITY IN THE FLOOR.

INSERT THE BASE PART OF THE METAL ANCHOR (I), AND SCREW IN THE

NAIL COMPONENT OF THE METAL ANCHOR (I) FROM ABOVE WITH A

SCREWDRIVER (NOT PROVIDED) UNTIL SECURELY TIGHTENED. REPEAT

FOR ALL HOLES.

**Screwdriver for Illustration

Purposes Only and Not Included

SETTING UP DEVICE & ENCLOSURE

**Tablet shown for illustration

and NOT INCLUDED.

INSERT THE APPROPRIATE FOAM

PIECE (J) THAT IS COMPATIBLE

WITH YOUR TABLET.

INSERT TABLET AS SHOWN. PLUG IN

POWER CABLE TO TABLET AND

CABLE ROUTE THROUGH THE BACK.

PLACE THE APPROPRIATE

PROVIDED TABLET COVER (J) TO

MATCH YOUR TABLET.

CLOSE THE ENCLOSURE

AND LOCK IT WITH THE

INCLUDED SET OF KEYS (I).

Produkt Specifikationer

Mærke:	CTA Digital
Kategori:	Ikke kategoriseret
Model:	PAD-CHKB
Bredde:	63.5 mm
Dybde:	38.1 mm
Højde:	1143 mm
Vægt:	8164 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Stativ bredde:	304.8 mm
Monteringstype:	Gulv
Kapabilitet:	iPad Pro 11(2018), iPad Pro 11(2020), iPad Pro 11(2021), iPad Air 10.9 4th (2020), iPad Air 10.9 5th (2022), iPad 10th Gen, Lenovo Tab K10, Samsung Tab S6 Lite, iPad Gen 7, iPad Gen 8(2020), iPad Gen 9(2021), iPad Pro 10.5, iPad Air Gen 3, Galaxy Tab S8, Galaxy Tab S7, Galaxy Tab A 10.1" (2019), Galaxy Tab A8, Lenovo Tab 4, Surface Go, 2, 3, 4, Galaxy Tab S5E, Galaxy Tab S6 and Galaxy Tab A7.
Mærke kompatibilitet:	Universel
Låsetype:	Nøgle
Maksimal skærmstørrelse kompatibilitet:	11 "
Minimal skærmstørrelse kompatibilitet:	9 "
Stativ højde:	406.4 mm