CTA Digital PAD-ICCTKG Manual

CTA Digital Ikke kategoriseret PAD-ICCTKG

Læs gratis den danske manual til CTA Digital PAD-ICCTKG (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 5 anmeldelser. Har du et spørgsmål om CTA Digital PAD-ICCTKG, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Caution: For proper results, please make sure your device is properly aligned with the inductive charging plate.

Peel the externsl

silicone sleeve from

the internal hard

case.

To open case, apply

gentle pressure to

the small clips

(noted on the

diagram by arrows).

The internal hard

case will open when

all four sides are

unclipped.

Once the iPad is

inside, plug the

lighning charging

cable into the power

socket. Then place

the internal front

(hard) cover on the

top of the case and

gently clip all four

sides shut.

Insert the iPad

into the back

portion of the

hard cover.

Reinstall

the

external

silicone

rubber

sleeve

Power Supply:

Input : AC 100-240V 50/60Hz

Output: DC12V 1.5A

Rating power:18W

Cable Length:1.8M

DC Plug: 5.5*2.1mm male DC Plug

Inductive Charging Case:

Qi Standard: V1.2.4

Input: DC12V 1.3A

Output: DC5V 2.4A(Max.)

Rating Power: 15W

Efficiency: 80-85%(Max.)

Inductive Distance:3-6mm

Input Socket: 5.5*2.1mm female DC socket

Output Plug:Apple Lightning Plug

Charging Time :4-4.5 hours)

Environmental Requirements:

Operating Temperature for iPad: 32℉ to 95℉ / 0℃ to 35℃

Nonoperating Temperature: -4℉ to 113℉ / -20℃ to 45℃

Caution: Please do not place or store the product on or near high-temperature areas like heating devices, open

flame, or in hot cars in extreme heat.

Caution: Please do not place or store the product in or near water, steam, or in any wet, humid, or damp places.

PAD-ICCB / PAD-ICCTK / PAD-ICCTKG / PAD-ICCSUB / ADD-ICCSTAND

For iPad 10.2” 7th/8th Gen, iPad Pro 10.5 Inch and iPad Air 3 (2019)

Connect the AC/DC Power Supply to the charging plate as pictured.

1. Locate kickstand at case rear and fold out underneath strap.

2. Display tablet at desired viewing angle.

3. Press kickstand in to return to handheld mode.

TABLETOP OR HANDHELD MODE

CONNECT TABLET CASE TO STAND

IPAD/STAND CHARGING

Take care to assure that

the charging case and back

charging plate are aligned

properly. When done

properly, you’ll see the blue

indicator light up on the

back of the charging plate.

A blue indicator light tells you your

iPad is properly connected to the

inductive charging plate.

Note the power level

displayed on the iPad

screen.

Produkt Specifikationer

Mærke:	CTA Digital
Kategori:	Ikke kategoriseret
Model:	PAD-ICCTKG
Bredde:	177 mm
Dybde:	208 mm
Højde:	144 mm
Vægt:	1315 g
Antal pr. pakke:	1 stk
Produktfarve:	Grøn
Beskyttelsesfunktioner:	Vandtæt
Materiale:	Metal, Rubber
Normal brug:	Skrivebord
Trådløs opladning:	Ja
Kapabilitet:	iPad 7th/ 8th/ 9th Generation 10.2-inch, iPad Pro 10.5-inch, iPad Air 3
Mobil enhedstype:	Tablet/UMPC
Maksimal skærmstørrelse kompatibilitet:	10.5 "
Orientering:	Horisontal/vertikal
Beslagtype til enhed:	Nej
Minimal skærmstørrelse kompatibilitet:	10.2 "