CTA Digital PAD-PARAFK Manual

CTA Digital Ikke kategoriseret PAD-PARAFK

Læs gratis den danske manual til CTA Digital PAD-PARAFK (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9 anmeldelser. Har du et spørgsmål om CTA Digital PAD-PARAFK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Premium Locking Floor Stand Kiosk

w/ Universal Security Enclosure, Keyboard Tray

and Storage Compartment (Black)

PAD-PARAFK

INSTRUCTION - MANUAL

CONTENTS:

INSTALLATION:

888-733-4448

1. Assembling floorstand base :

M4 x12

M5 Allen Key

3. Attaching enclosure to VESA plate : 4. Inserting tablet into enclosure :

1A. Allign the holes on the sntad (A) with holes on the base (B) and turn in

screws (L) with provided allen tool (P) until securely tightened. Shown above.

2B. When the cable reaches the

bottom of the stand, pull through the

hole at the stand back and remove

the weighted pendant as shown.

2A. To route a charge cable through

the stand, attach the weighted

pendant to your charge cable, then

pass through the cutout at the top of

the stand.

3A. Align enclosure (C) VESA holes to VESA plate holes in stand (A) and from the

front of enclosure turn in screws (J) into the threaded VESA holes with provided

allen tool (O) until securely thigtened. Shown above.

4A. Find the appropiate size foam padding (B) for the tablet you wish to use.

Make sure device is compatible for the enclosure. if having power/data cord

attached to tablet, slide it through the back of the foam as shown and out the

opening in the back.

**Tablet for illustration only,

NOT INCLUDED

M5 x12

M5 Nut

D E

M5 x 10

M5 x12

Washer

M4 x12

Washer

M6 Allen Key

M6 p1-x4

2. Cable routing :

8. Setting up keyboard tray to floor stand :

10. Mounting magnetic brochure holder :

9. Expanding or Stowing Tray Extension

9A. If not extended, find the tray extension on the underneath of the main tray

body. Firmly adjust and fold out tray extension. Insert metal rod component into

hole as shown to securely lock extension piece in place. When stowing away,

you need to remove rod first, then fold up by rotating around the joint.

8A. Place keyboard tray (D) on the side holes of stand at desired height and turn in

Screws and washers(F,G or H,I) with the provided allen tool (O) until securely

tightened. Shown above.

11A. Enclosure can be mounted in vertical and horizontal positions as

needed. Shown above.

10A. Locate magnetic brochure

holder (E) and snap it onto

stand body (A) as needed.

**Tablet for illustration only,

NOT INCLUDED

**Tablet for illustration only,

NOT INCLUDED

**There are two versions

of the floor stand so both

set of hardware have been

included. One of the sets

will be left unused.

5. Optional - Placing blank sheet insert into enclosure :

5B. Close and lock enclosure afterwards and you`re set

5A. Lay-in correct masking insert from bundle (M) as needed the correct

fitted look for your device.

888-733-4448

M5 x12

Screw

F G

M5 x12

Washer

M4 x12

Screw

M4 x12

Washer

6A. When installing device into enclosure (C), identify where the camera is.

Then simply remove and pop out the cover prior to mounting or setting up tablet

to properly expose camera.

**Tablet for illustration only,

NOT INCLUDED

**Tablet for illustration only,

NOT INCLUDED

6. Removing back covers : 7. Setting up security :

7A. Once the tablet device is set up,

close the front lid of the enclosure (A).

7B. Insert the key (N) in the keyhole on top

of enclosure, and turn clockwise to lock the

enclosure in place.

11. Portrait & Landscape modes :

snap**

Produkt Specifikationer

Mærke:	CTA Digital
Kategori:	Ikke kategoriseret
Model:	PAD-PARAFK

Har du brug for hjælp?

Hvis du har brug for hjælp til CTA Digital PAD-PARAFK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret CTA Digital Manualer

CTA Digital PAD-LEDPARAF Manual

5 Januar 2025

CTA Digital PAD-LOCUHW Manual

27 December 2024

CTA Digital PAD-SHFSW Manual

11 December 2024

CTA Digital ADD-PARAPRTB Manual

11 December 2024

CTA Digital PAD-ICCTKG Manual

11 December 2024

CTA Digital PAD-LTMUH2 Manual

11 December 2024

CTA Digital PAD-PARAFK Manual

11 December 2024

CTA Digital PAD-PARAMULTI Manual

10 December 2024

CTA Digital PAD-AFSVP Manual

10 December 2024

CTA Digital ADD-AUTSAM Manual

10 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

OmniMount POWER40 Manual

17 Juni 2025

OmniMount OL50FT Manual

17 Juni 2025

Intermatic FD30MHW Manual

17 Juni 2025

Toorx SRX-EVOLVE Manual

17 Juni 2025

OmniMount WorldMount 2N1-L Manual

17 Juni 2025

OmniMount WorldMount 4N1-L Manual

17 Juni 2025

Intermatic FD60MC Manual

17 Juni 2025

Microchip MPFS160TLS Manual

17 Juni 2025

Hughes & Kettner Metal Master Manual

17 Juni 2025

Hansgrohe AXOR Montreux 16516310 Manual

17 Juni 2025