CTA Digital PAD-RPTS Manual

CTA Digital Ikke kategoriseret PAD-RPTS

Læs gratis den danske manual til CTA Digital PAD-RPTS (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 9 anmeldelser. Har du et spørgsmål om CTA Digital PAD-RPTS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Instructions:

1. Base Assembly:

2. Connecting the battery Case and the Tablet Gooseneck holder

1. Pull open each foot release and extend tripod legs

to desired length. Close each foot release.

2. Turn pole knob counter-clockwise to loosen, then

rotate pole adjustment handle to adjust pole to

desired height. Turn pole knob clockwise to tighten.

3. Rotate plastic grip counter clock

wise to loosen, then adjust pole to

desired height. Rotate plastic grip

clockwise to tighten.

1. Press the button on the side of the

holder center to slide out holder arm.

Insert your tablet against the spring

end, then slide the other arm back in,

closing firmly.

2. Use the larger Allen key to tighten

and loosen the gooseneck to holder

connection, adjusting ease of rotation.

3. Installing your Device and Adjusting the Floor Stand:

Larger

Allen

Key

Metal Connection

Tripod Foot

Release

Bottom Pole

With Hang Hook

Screw gooseneck onto the metal connection at the top of

the pole, then tighten the meter screw inside the goose-

neck base using the smaller Allen key.

Gooseneck

Metal

Connection

Smaller

Allen Key

Adjustable Pole

Pole Adjustment

Handle

Pole Knob

Tripod Legs

Battery Case Holder

Rolling Portable Tripod Stand

for 7-13 Inch Tablets

PAD-RPTS

SUPPORT@CTADIGITAL.COM

Produkt Specifikationer

Mærke:	CTA Digital
Kategori:	Ikke kategoriseret
Model:	PAD-RPTS
Produktfarve:	Sort
Formål:	Tablet
Antal ben:	3 ben
Højde (maks.):	- mm
Maksimal vægtkapacitet:	- kg