CTA Digital PAD-SICCB Manual

CTA Digital Ikke kategoriseret PAD-SICCB

Læs gratis den danske manual til CTA Digital PAD-SICCB (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om CTA Digital PAD-SICCB, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
888-733-4448
PAD-SICCB
INSTALLATION - MANUAL
INSTALLATION:
1. Inserting Tablet into Enclosure
Wireless Inductive Charging Case w/ Security Lock
A
B
E F
C
D
E
X2
D
X1
CONTENTS:
Once the tablet device is inside, plug
the charging cable into the power
socket. Then place the internal front
(hard) cover on top of the case, and
gently clip all four sides shut.
Tighten the anti-theft screw with
the included star key (C) if you
want the case security.
Reinstall the external silicone
rubber sleeve.
Peel the external silicone sleeve
from the internal hard case using
component (F).
To open case, apply gentle pressure to
the small clips (noted on the diagram by
arrows). The internal hard case will
open when all four sides are unclipped.
Insert the iPad into the back
portion of the hard cover.
A
F
2. Setting the Cover in Tabletop or Handheld Mode
1. Locate kickstand at case (A) rear and fold out underneath strap.
2. Display tablet at desired viewing angle.
3. Press kickstand in to return to handheld mode.
3. Charging the Tablet Device
Connect the AC/DC power supply to the charging plate as shown above. Make sure that the
charging case and the
back charging plate
are aligned properly.
You should see a blue
indicator lighting up
on the back of the
charging plate.
The blue indicator light indicates that the
tablet device is properly connected to
the inductive charging plate.
There should be a power level
indicator on the tablet screen.
4. Using with kiosk stand (ADD-ICCSTAND)
4A. Place component (E) in the
(4) outter holes in the back of
the charging plate.
4B. Align VESA holes of the charging plate (B) and
the stand, and rotate in (4) screws (D) using the
included allen key (C) until securely tightened.
4C. Place the tablet device
on top of the charging plate
by aligning the magnets.
A
B
A
E
B
B
D
C
A
B

Produkt Specifikationer

Mærke: CTA Digital
Kategori: Ikke kategoriseret
Model: PAD-SICCB

Har du brug for hjælp?

Hvis du har brug for hjælp til CTA Digital PAD-SICCB stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret CTA Digital Manualer

CTA Digital

CTA Digital PAD-SSPARAW Manual

26 August 2025
CTA Digital

CTA Digital PAD-RPDMS Manual

25 August 2025
CTA Digital

CTA Digital PAD-PARAW2D Manual

25 August 2025
CTA Digital

CTA Digital PAD-PARAWW2D Manual

25 August 2025
CTA Digital

CTA Digital ADD-SSKPCB Manual

25 August 2025
CTA Digital

CTA Digital ADD-SSKPCW Manual

25 August 2025
CTA Digital

CTA Digital ADD-VESAWW Manual

20 Juli 2025
CTA Digital

CTA Digital PAD-SCGSI Manual

19 Juli 2025
CTA Digital

CTA Digital ADD-USBPOSW Manual

19 Juli 2025
CTA Digital

CTA Digital PAD-RSDMB Manual

16 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Cougar

Cougar GX-S Manual

26 August 2025
AccuTemp

AccuTemp Evolution E62403E110 Manual

26 August 2025
Mastercraft

Mastercraft X14V Manual

26 August 2025
Tefal

Tefal Delfini Plus TT131E Manual

26 August 2025
Saris

Saris Guardian 2 Manual

26 August 2025
Telestar

Telestar HW1 Manual

26 August 2025
Sauermann

Sauermann Si-RS1 Manual

26 August 2025
Tefal

Tefal Subito CM5S1D Manual

26 August 2025
Maxview

Maxview Roam Campervan MXL056 Manual

26 August 2025
Mr Coffee

Mr Coffee BVMC-IHC Manual

26 August 2025