CTA Digital PAD-UAM Manual

CTA Digital Ikke kategoriseret PAD-UAM

Læs gratis den danske manual til CTA Digital PAD-UAM (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om CTA Digital PAD-UAM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Specifications

•

Product weight: 1.10 lbs

Device holder adjustment: 4.7" to 8.2"

Loading weight capacity: <= 2.20 lbs

C-clamp adjustment: 0.27" to 1.49"

Full height (from base to center of holder): 18"

Package Contents

2-In-1 Tablet holder Wall Stand - Black/White

Safety information:

Do not wash with hot water

Do not place the sucon grip on a rough or uneven surface

Do not place the sucon grip on a surface prone to vibraon or movement

Keep out of reach of children

C-clamp

Sucon cup

Wire clip (x4)

3-in-1 allen key

•

Installaon Guide

Product Layout

6.89"

9.92"

4.53"

3.94"

11.61"

4.72"~8.27"

Key Features & Benefits

•

Full moon arculang tablet/smartphone

desktop mount frees you from holding the

device to maximize your comfort while

reading arcles or watching videos

•

Retractable holding bracket expands up to

8.2" with side openings allows easy device

installing/removing and cable connecon

•

Fits most 7" to 12" tablets, including iPad,

iPad Mini, iPad Air and Samsung Tab series

•

Supports mul-direcon 360° rotate, swivel,

and lt for the best ergonomic viewing

posion

•

Arculang aluminum arm allows up to

13" height adjustment

•

Includes both c-clamp and heavy-duty sucon

cup for easy and secure installaon onto most

surfaces without drilling. Convenient C-clamp

knob accessible from

the top for easy setup

•

Protecve pads fully integrated into device

holder and clamp protects device from

scratching, falling or slipping

PAD-UAM

Ultra-Light Arm Mount with

Clamp and Suction Bases

for Tablets and Smartphones

Installation Instructions

C-clamp Mount Setup

1. Turn the C-clamp screw counter-clockwise unl

the opening is wide enough to ﬁt around desk or

table edge.

2. Turn C-clamp screw clockwise to ghten and aﬃx

C-clamp to desk or table edge.

3. Slide the arm mount into the top of the C-clamp

and align the holes.

4. Insert the arm mount fastener screw and turn

clockwise to ghten.

clamp screw

fastener screw

Suction Mount Setup

1. With the semi-circle sucon lock in vercal

posion, place the sucon grip ﬁrmly against

surface.

2. Fold the semi-circle sucon lock into horizontal

posion to lock the sucon grip in place.

3. Slide the arm mount into place on the top of

the sucon grip and align the holes.

4. Insert the arm mount fastener screw and turn

clockwise to ghten.

Adjustment & Cable Management

Adjusting the Arm Mount:

Adjust to the desired poson using the included 3-in-

1 allen key.

3mm

230

180

300

360

180

3mm

2.5mm

3-in-1 allen key

4mm

Device Holder:

Adjust the width to ﬁt your tablet or smartphone.

Cable Management System:

Arrange the cables into the cable covers and down

the tube using the included wire clips.

The sucon grip will accumulate dirt and dust with regular use and should be cleaned with

cold water every 2 months. This will ensure that the sucon grip maintains full strength.

SUPPORT@CTADIGITAL.COM

Produkt Specifikationer

Mærke:	CTA Digital
Kategori:	Ikke kategoriseret
Model:	PAD-UAM
Type:	Passiv holder
Bredde:	149 mm
Dybde:	79.4 mm
Højde:	520.7 mm
Vægt:	580 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Normal brug:	Indendørs
Drejelig vinkel:	360 °
Mobil enhedstype:	Mobile phone/Smartphone, Tablet/UMPC
Orientering:	Horisontal/vertikal
Beslagtype til enhed:	Sugekop
Mindste enhedsbredde:	114.3 mm
Enhed, maksimal bredde:	196.85 mm
Enhed, maksimal dybde:	19.05 mm
Arm drejevinkel:	160 °