CTA Digital PAD-UATPB2 Manual

CTA Digital Ikke kategoriseret PAD-UATPB2

Læs gratis den danske manual til CTA Digital PAD-UATPB2 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 18 anmeldelser. Har du et spørgsmål om CTA Digital PAD-UATPB2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Package Contents

Insert the case connector into

the short tube the tighten the screws

using included Allen key

Fixed clamp

Holder

Holder connector

Lock

Key

Tube connector

Key slot

Insert the tube connector

into the long tube then

tighten the screws

using included Allen key

Sliding clamp

Stylus

Short tube

Holder connector

Long tube

Base connector

Base

3Insert the long tube into

the base connector then

tighten the screws

using included Allen key

Security Kiosk Dual Stand for 7-14 Inch Tablets

support@ctadigital.com

1) Place the stand on a flat surface and orient the holder vertically,

with the fixed end at the bottom and the sliding end on top.

2) Pull back the lock catch at the rear of the holder. Place tablet corner

diagonally into the fixed clamp end, then push sliding end down until it is firmly cradling tablet.

1) Attach cable end to any permanent fixture using loop.

2) With key inside, insert lock end to slot on stand base or back of holder.

3. Turn key and remove from lock to attach cable to stand.

Using the holder

Cable management system

3) Push the lock catch back in, then turn the key to lock in place.

ATTACHED TO BASE

Fixed clamp

Key slot

Sliding clamp

Push sliding clamp

support@ctadigital.com

Produkt Specifikationer

Mærke:	CTA Digital
Kategori:	Ikke kategoriseret
Model:	PAD-UATPB2
Bredde:	285.75 mm
Dybde:	180.975 mm
Højde:	355.6 mm
Vægt:	1950 g
Produktfarve:	Sort
Låsetype:	Nøgle
Maksimal skærmstørrelse kompatibilitet:	12.9 "
Antal nøgler inkluderet:	2 stk