CTA Digital PAD-VPOS2B Manual

CTA Digital Ikke kategoriseret PAD-VPOS2B

Læs gratis den danske manual til CTA Digital PAD-VPOS2B (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om CTA Digital PAD-VPOS2B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

x8 x1

Adjustable Table Mount

PAD-VPOS2BC

INSTRUCTION - MANUAL

with Universal Security Holder & Universal Security Enclosure

Instructions:

Contents:

1a. Setting up drill mount

Screw in base plate from below

with hardware as shown to the left

1b. Setting up kiosk

Drill in nails to the table as shown

Install (4) screws with base plate

from below as shown

888-733-4448

2. Installing Enclosure

Screw in (4) screws from the front through the enclosure

and VESA while holding the hex nuts from behind until

secured and tightened (Shown Above)

888-733-4448

Using the provided tool screw in (4) screws from the

front around the security holder

and hold the hex nuts from behind with fingers until

secured and tightened (Shown Above)

3. Inserting Tablet into Security Holder

1. Press and hold on the release button

to unlock the frame. Expand holder to fit your

tablet from corner to corner.

2. Install the tablet into the holder

3. Adjust the holder to fit your tablet

and retract to securely fit around the

corners of your tablet.

4. Inserting Tablet into Enclosure

1.Unlock the tablet enclosure by

rotating the key until it pop opens

2. Find the appropriate size foam

padding (included) for the tablet you

wish to use. Make sure device is

compatible for the enclosure

3. Lay your device in and connect any

cables or cords you have

4. If needed, make sure to lay-in the

correct masking cover. Then close

and lock the enclosure and you’re

ready to go.

**TABLETS NOT INCLUDED

Produkt Specifikationer

Mærke:	CTA Digital
Kategori:	Ikke kategoriseret
Model:	PAD-VPOS2B
Bredde:	198 mm
Dybde:	213 mm
Højde:	220 mm
Vægt:	4554 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Panel montering grænseflade:	75 x 75, 100 x 100 mm
Husmateriale:	Metal
Monteringstype:	Skrivebord
Højdejustering:	Ja
Kompatible produkter:	iPad 10.2-inch (7th/ 8th/ 9th Generation), 11-inch iPad Pro (2018/2020), iPad Air 3 (2019), iPad Gen. 5 (2017), iPad Gen. 6 (2018), iPad Pro 9.7, iPad Pro 10.5, iPad Air Gen. 1-2, Galaxy Tab A 9.7”, Galaxy Tab S2 9.7”, Galaxy Tab S3 9.7”, Galaxy Tab 3 10.1”, and Galaxy Tab 4 10.1”, Galaxy Tab A 10.1″ (2019), Galaxy Tab A 10.1″ (2016), Lenovo Tab 4, Surface Go, Surface Go 3, Galaxy Tab S5E, Galaxy Tab S6/Lite
Montering:	Skruer
Maksimal vægtkapacitet:	- kg
Skruer inkluderet:	Ja
Forbedret kabelstyring:	Ja
Maksimal skærmstørrelse kompatibilitet:	- "
Orientering:	Landskab/portræt
Antal understøttede skærme:	2
Minimal skærmstørrelse kompatibilitet:	- "
Montering interface kompatibilitet (min.):	75 x 75 mm
Montering interface kompatibilitet (maks.):	100 x 100 mm
Tyverisikring:	Ja
Maksimal kompatibilitet med tabletskærmstørrelse:	11 "
Minimum kompatibilitet med tabletskærmstørrelse:	9 "
Tablet rum:	Ja