CTA Digital PAD-WDM Manual

CTA Digital Ikke kategoriseret PAD-WDM

Læs gratis den danske manual til CTA Digital PAD-WDM (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om CTA Digital PAD-WDM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

PAD-WDM

Wall, Under Cabinet & Desk Mount

with 2 Mounting Bases for Tablets

(1) Mount Stand (2) Mounting Bases (6) Screws (6) Anchors

PAD-WDM

Removing the Mount Stand from the Mounting Base

Installing the Mount Stand to the Mounting Base

Adjusting the Mount

Twist the mount stand

off of the base

Pull on the tab to

cover the hole.

Slide on the plate.

Slide off the plate.

Note: You want the base of

the Mounting Stand to twist,

not just the Mounting Stand itself.

Remove the plate off of the Mounting

Base and twist the Mount Stand clockwise.

Once the Mount Stand is removed, slide

the plate back on and pull the tab to

extend a circular cover for the hole.

Slide the plate onto the Mounting Base.

Note: The plate will only

completely slide on if the

Mount Stand has been

thoroughly twisted into place.

Once the Mounting Stand is

installed (as shown above), you

may load your tablet.

By twisting the nut that attaches the mount to the

stand, you can adjust how loose or tight the

rotation mechanic is for the mount.

If you plan on using the Mounting Stand without installing the Mounting Base

to a surface, please be careful adjusting the arm extension. Overextension of

the arm or weight imbalances with heavier tablets will cause the product and

your device to fall over, resulting in possible damage.

Align the wedges of the Mount Stand with the

grooves of the Mounting Base and set the Mount

Stand into the Mounting Base. Then, twist the Mount

Stand to your left until you feel resistance and hold it.

Once the wedges of the Mount Stand

align with the grooves of the Mounting

Base, lift to remove the Mount Stand

from the Mounting Base.

Maximum Height: 16.38”

Compatible with tablets ranging 4 – 9 inches

in width, such as the Samsung Galaxy Tab S,

iPad Mini 4 or Google Nexus 9

For larger tablets, you may need

to pull up on the top Grip to

expand the spring-loaded feature

for the tablet to properly fit into

the mount.

The different functional positions for the Wall,

Under Cabinet & Desk Mount with 2 Mounting

Bases for Tablets

Installing the Tablet

For Mounting to the

Desk or Cabinet

Press the button on the back to

open the bottom Grip. Put the

tablet into the Tablet Mount and

adjust the grips to lock and secure

the tablet into place.

1. Make marks according to

the hole sites of the Mounting

Base (opening forward).

Remove the plate

from the

Mounting Base.

1. Make marks according to

the hole sites of the Mounting

Base (opening upward).

3. Carefully drive the three

anchors into the wall with a

hammer.

4. Drive the three screws into

the Mounting Base starting

from front to center and

tighten them to the hole site.

Drive the three screws into the

Mounting Base starting from

front to center and tighten

them to the hole site.

1 2 6 6

For Mounting to the Wall

Produkt Specifikationer

Mærke:	CTA Digital
Kategori:	Ikke kategoriseret
Model:	PAD-WDM
Type:	Passiv holder
Produktfarve:	Hvid
Indbyggede højttaler(e):	Ingen
Strømkilde type:	Ikke understøttet
Normal brug:	Indendørs
Kapabilitet:	Samsung Galaxy Tab S, iPad mini 4, Google Nexus 9
Mobil enhedstype:	Tablet/UMPC
Mindste enhedsbredde:	101.6 mm
Enhed, maksimal bredde:	228.6 mm
Enhed, maksimal dybde:	15 mm
Enhed, maksimal højde:	416 mm