Cuckoo CRP-HF0610F Manual

Cuckoo Risskove CRP-HF0610F

Læs gratis den danske manual til Cuckoo CRP-HF0610F (52 sider) i kategorien Risskove. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Cuckoo CRP-HF0610F, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/52

Operation Guide 5522

E-9

To do this: Enter this mode: See:

x View the current time in one of 48 cities (31 time

zones) around the globe

x Swap Home Time and World Time

World Time Mode E-39

Set an alarm time Alarm Mode E-43

E-8

Mode Reference Guide

The mode you should select depends on what you want to do.

To do this: Enter this mode: See:

x View the current date in the Home City

x Configure Home City and daylight saving time (DST)

settings

x Configure time and date settings

x Direct timing start from the Timekeeping Mode

x Change the display illumination duration setting

x Enable/disable the button operation tone

Timekeeping Mode E-17

x Use the stopwatch to measure elapsed time

x Use Target Time Alarm Stopwatch Mode E-25

Use the countdown timer Countdown Timer Mode E-36

E-7

Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-47

To turn on illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-47

To change the illumination duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-48

Adjusting Hand Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-49

Button Operation Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-52

To turn the button operation tone on and off . . . . . . . . . . . . . . . . . . . . . . . . . E-52

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-54

Main Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-56

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-58

E-6

To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38

Checking the Current Time in a Different Time Zone . . . . . . . . . . . . . . . . . . . E-39

To enter the World Time Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-40

To view the time in another time zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-40

To specify standard time or daylight saving time (DST) for a city . . . . . . . . . . . E-41

To swap your Home City and World Time City . . . . . . . . . . . . . . . . . . . . . . . . E-42

Using the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-43

To enter the Alarm Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-43

To set an alarm time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-44

To test the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-45

To turn an alarm and the Hourly Time Signal on and off . . . . . . . . . . . . . . . . . E-46

To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-46

E-5

Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-25

To enter the Stopwatch Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-26

To perform an elapsed time operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28

To pause at a split time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28

To measure two finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28

To set a target time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-30

To use the target time alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-31

To stop the alert beeper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-35

To perform stopwatch timing without using the Target Time Alarm . . . . . . . . . E-35

Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36

To enter the Countdown Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36

To configure the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-37

To perform a countdown timer operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38

E-4

Contents

About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2

Things to check before using the watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3

Mode Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-8

Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-17

Configuring Home City Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-18

To configure Home City settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-18

To change the Daylight Saving Time (summer time) setting . . . . . . . . . . . . . . E-20

Adjusting the Digital Time and Date Settings . . . . . . . . . . . . . . . . . . . . . . . . .E-21

To configure the digital time and date settings . . . . . . . . . . . . . . . . . . . . . . . . E-21

E-3

Things to check before using the watch

1. Check the Home City and the daylight saving time (DST) setting.

Use the procedure under “To configure Home City settings” (page E-18) to configure

your Home City and daylight saving time settings.

Important!

x Proper World Time Mode data depends on correct Home City, time, and date

settings in the Timekeeping Mode. Make sure you configure these settings

correctly.

2. Set the current time.

x See “Adjusting the Digital Time and Date Settings” (page E-21).

The watch is now ready for use.

E-2

About This Manual

x Depending on the model of your watch, display text

appears either as dark figures on a light background, or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

x Button operations are indicated using the letters shown

in the illustration.

x Note that the product illustrations in this manual are

intended for reference only, and so the actual product

may appear somewhat different than depicted by an

illustration.

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

Operation Guide 5522

E-19

3. After the setting is the way you want, press to return to the Timekeeping A

Mode.

Note

x You can check the city code and name (English) of your Home City by pressing A.

x After you specify a city code, the watch will use UTC* offsets in the World Time

Mode to calculate the current time for other time zones based on the current time

in your Home City.

* Coordinated Universal Time, the world-wide scientific standard of timekeeping.

The reference point for UTC is Greenwich, England.

E-18

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City, and selecting

either standard time or daylight saving time (DST).

To configure Home City settings

1. In the Timekeeping Mode, hold down until the A

flashing indicator disappears from the SET Hold

display and the currently selected city code flashes on

the display.

x This indicates the Home City setting mode.

2. Use (+) and (–) to scroll through city codes until D B

the one you want is displayed.

x For details about city codes, see the “City Code

Table” at the back of this manual.

x Holding down either button scrolls at high speed.

City Code

E-17

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

Hour

Second

Month-DayDay of week

Minute

PM indicator

Hour : Minute

Second

E-16

2. Holding down again as you press will cause the hands to return to their L C

normal positions (normal timekeeping).

Note

x Watch button functions are the same regardless of whether the hands are moved

out of the way or at their normal positions.

x Changing to another mode will cause the hands to move back to their normal

positions.

x The hands also will move back to their normal positions automatically if no

operation is performed for about one hour.

E-15

1. While holding down , press L C.

x This will cause the hour and minute hands to move to a location where they do

not block your view of the digital display.

Example: When the current time is 8:23

Flashes while the hands are moved out of the way.

E-14

General Functions (All Modes)

The functions and operations described in this section can be used in all modes.

Auto Return

If you do not perform any operation for about two or three minutes while configuring

settings (setting flashing on the digital display) in any mode, the watch will exit the

setting operation and return to normal display.

Scrolling

The and buttons are used on the setting mode to scroll through data on the B D

display. In most cases, holding down these buttons during a scroll operation scrolls

through the data at high speed.

Moving the Hands Out of the Way for Better Viewing

You can use the procedure below to temporarily move the hour and minute hands

out of the way to better view what is on the display.

x This operation can be performed in any mode. In the case of a setting mode

(setting flashing on the screen), the hands will move out of the way automatically,

even if you do not perform the below operation.

E-13

Alarm Mode Stopwatch Mode

Countdown Timer Mode World Time Mode

E-12

x Press C to cycle between the modes as shown below.

x To return to the Timekeeping Mode from any other mode, hold down C for about

two seconds.

Timekeeping Mode

Each time you press the button, the display will B

change as follows.

E-11

x In any mode (except a setting mode), press to illuminate the display.L

E-10

Selecting a Mode

x In the Timekeeping Mode, press to enter the Stopwatch Mode.D

x For more information about using the Stopwatch Mode, see “To enter the

Stopwatch Mode” (page E-26).

Timekeeping Mode Stopwatch Mode

Produkt Specifikationer

Mærke:	Cuckoo
Kategori:	Risskove
Model:	CRP-HF0610F

Har du brug for hjælp?

Hvis du har brug for hjælp til Cuckoo CRP-HF0610F stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Risskove Cuckoo Manualer

Cuckoo CR-3055 Manual

19 Juni 2025

Cuckoo CR-0675F Manual

14 Juni 2025

Cuckoo ICOOK Q5 CMC-QAB501S Manual

3 Januar 2025

Cuckoo CRP-ST0609F Manual

13 Juli 2024

Cuckoo CR-3511 Manual

13 Juli 2024

Cuckoo CR-0632 Manual

13 Juli 2024

Cuckoo CRP-MHTR0309F Manual

13 Juli 2024

Cuckoo CRP-ST1009F Manual

13 Juli 2024

Cuckoo CMC-QSB501S Manual

13 Juli 2024

Cuckoo SR-4600 Manual

13 Juli 2024

Risskove Manualer

Nyeste Risskove Manualer

Panasonic SR-Y18FGJ Manual

27 Juli 2025

Panasonic SR-AFM187 Manual

26 Juli 2025

Panasonic SR-GB42 Manual

26 Juli 2025

Panasonic SR-W10 Manual

26 Juli 2025

Panasonic SR-GA421SH Manual

26 Juli 2025

Panasonic SR-G06FGE Manual

26 Juli 2025

Panasonic SR-ZC075 Manual

26 Juli 2025

Panasonic SR-ZS185 Manual

26 Juli 2025

Panasonic SR-Y22FGJ Manual

26 Juli 2025

Panasonic SR-ZS105 Manual

26 Juli 2025