CyberPower CPBC5200AC Manual

CyberPower Batteri CPBC5200AC

Læs gratis den danske manual til CyberPower CPBC5200AC (2 sider) i kategorien Batteri. Denne vejledning er vurderet som hjælpsom af 67 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 34 anmeldelser. Har du et spørgsmål om CyberPower CPBC5200AC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

PACKAGE CONTENTS

• USB Battery Pack (CPBC5200AC Series)

• User Guide

SPECIFICATIONS

Battery Capacity: 5200mA

Rated Input: AC 100~240V, 50/60Hz 0.4A

Rated Output: DC 5V 2.1A (Max.)

PC Charging time: ~6 Hours

Dimension: 4.26x2.2x0.96 inch

Weight: 5.93 oz

Environment:

Storage: 14 to 122°F (-10 to 50°C)

Operation: 32 to 104˚F (0 to 40˚C)

CHARGING THE BATTERY PACK

Charge the USB Battery Pack by putting the plug into an AC

socket. When charging the battery pack, the LED indicator will

light up automatically. Press the button to turn it off and press

it again to switch the LED indicator on. Recharge the

CPBC5200AC Series every 3 months when not in use to

maintain peak battery performance. The battery capacity may

decline after 300 charging cycles.

SAFETY PRECAUTION

Before using the USB Battery Pack, please read the

following warnings carefully. Use the product according

to the procedures described in this manual. Failure to

follow these safety precautions may result in fire,

explosion, electrical shock or other dangers

1. Store between 14 to 122°F (-10 to 50°C).Operate

between 32 to 104°F(0 to 40°C).

2. Do not immerse this product in water or other liquids,

as such use may result in fire or electrical shock. If

water or other liquids enter the battery interior, unplug

the product immediately from any attached power

source or device.　

3. Do not use this product with wet hands. Moisture in or

on this product may result in electrical shock.

4. Store this product in a cool and dry environment when not

in use.

5. Do not puncture this product. Puncturing the battery

may cause the release of harmful substances.

6. It is normal for the USB Battery Pack to become warm

during charging.

7. Ensure that all users read these warnings and

instructions before using.

8. Please recycle USB Battery Pack in accordance with local

environmental laws and regulations

9. Do not dismantle, open or shred secondary cells or

batteries.

10. Do not expose cells or batteries to heat or fire. Avoid

storage in direct sunlight.

11. Do not short-circuit a cell or a battery. Do not store

cells or batteries haphazardly in a box or drawer

where they may short-circuit each other or be

short-circuited by other metal objects.

12. Do not remove a cell or battery from its original

packaging until required for use.

13. Do not subject cells or batteries to mechanical shock.

14. In the event of a cell leaking, do not allow the liquid to

come in contact with the skin or eyes. If contact has

been made, wash the affected area with copious

amounts of water and seek medical advice.

15. Do not use any charger other than that specifically

provided for use with the equipment.

16. Observe the plus (+) and minus (–) marks on the cell,

battery and equipment and ensure correct use.

17. Do not use any cell or battery which is not designed

for use with the equipment.

18. Do not mix cells of different manufacture, capacity,

size or type within a device.

19. Keep cells and batteries out of the reach of children.

20. Seek medical advice immediately if a cell or a battery

has been swallowed.

21. Always purchase the correct cell or battery for the

equipment.

22. Keep cells and batteries clean and dry.

23. Wipe the cell or battery terminals with a clean dry cloth if

they become dirty.

24. Secondary cells and batteries need to be charged before

use. Always use the correct charger and refer to the

manufacturer’s instructions or equipment manual for

proper charging instructions.

25. Do not leave a battery on prolonged charge when not in use.

26. After extended periods of storage, it may be necessary to

charge and discharge the cells or batteries several times

to obtain maximum performance.

27. Secondary cells and batteries give their best performance

when they are operated at normal room temperature (20

°C ± 5 °C).

28. Retain the original product literature for future reference.

29. Use only the cell or battery in the application for which it

was intended.

30. When possible, remove the battery from the equipment

when not in use.

31. Dispose of properly.

LEGAL NOTICES

FCC Part 15

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency

energy and if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

– Increase the separation between the equipment

and receiver.

– Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

If the LED indicator extinguishes automatically during the

charging process, press the button to revert.

FCC WARNING

Changes or modifications not expressly approved by the

party responsible for compliance with the FCC Rules could

void the user’s authority to operate this equipment.

LIMITED PRODUCT WARRANTY

CyberPower offers limited product warranty for the hardware

of the USB Battery Pack* and the product is free from

material and manufacturing defects for one year. A

reasonable purchase proof with date must be provided when

submission. CyberPower's sole responsibility is to repair or

replace the product if a material or manufacturing defect

results in product failure during its normal use. The warranty

is void if the product is damaged due to abuse, alteration,

misuse, negligence, incorrect voltage supply, air/water

pollution, accidents and natural disasters.

INTRODUCTION

The USB Battery Pack (CPBC5200AC Series) is a high

capacity rechargeable lithium battery designed for

powering up to two mobile devices such as phones, MP3

players, tablets, and handheld gaming devices while away

from other power sources

FEATURES

- Compact and portable design

- Dual output

- Built in AC plug

- Battery life indicator

PRODUCT VIEW:

USB BATTERY PACK

USER GUIDE

Model: CPBC5200AC Series

TROUBLE SHOOTING

K09-0000172-01

POWER

YOUR DEVICES

CHARGING THE

POWER PACK

PAD

ITEMNO. DESCRIPTION

Power on/ LED Indicator Switch

Power Off

LED Battery Life lndicator

USB Output Port 1*

USB Output Port 2

AC Input Plug

Press the button

Press and hold for 3 seconds

As the “LED INDICATOR”

table showing

5V/ 2.1A (Max.) USB output

AC 100~240V, 50/60Hz, 0.4A

CONDITIONNO. LED INDICATION

Battery Life Indicator

Overload

Low Battery

Four LEDs represent 25%,

50%, 75% and 100% battery

life from left to right side.

All four LEDs flash simultaneously.

The first LED light flashes rapidly.

LED INDICATOR

Problem Possible Cause Solution

USB Battery

Pack does

not power

the device

1.The device is drawing

too much power.

2.The battery is out

of power

3.The battery pack is

overloaded.

Check the power specification

of the device before charging

with the CPBC5200AC Series.

Charge the battery pack.

Remove the device causing the

overload and press the power

button to return to normal mode.

Re-attach the USB connector

to the socket.

Check that power is provided

USB Battery

pack does

not recharge

1.Incorrect connection

between charger and

USB Battery Pack.

2.No power from the

source.

*Charge tablets and Apple devices through USB Output Port 1 to achieve fast charging.

Note:

1. The LED indicator will automatically switch off 5 seconds

after pressing the button.

2. When the battery pack is connected to the power, the LED

indicator will light indicating the charging status. Press the

button to switch off the indicator and press the button again

to switch it back on.

3. All four LED indicators will flash when the battery pack is

overloaded. Remove the device causing the overload and

press the power button to return to normal mode.

CyberPower Systems (USA), Inc.

4241 12th Avenue East, Suite 400, Shakopee, MN 55379, U.S.A.

TEL: (952) 403-9500 Toll-Free: (877) 297-6937

FAX: (952) 403-0009 E-mail: tech@cpsww.com

CPSww.com

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Batteri
Model:	CPBC5200AC
Bredde:	55.8 mm
Dybde:	108.2 mm
Højde:	24.3 mm
Vægt:	167.8 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Batterispænding:	3.7 V
Batterikapacitet:	5200 mAh
Opbevaringstemperatur (T-T):	-10 - 50 °C
Driftstemperatur (T-T):	10 - 40 °C
Antal:	1
Certificering:	TUV/FCC/CE
Udgangsstrøm:	0.4 A
Bæredygtighedscertifikater:	RoHS
Opladningstid for batteri (slukket):	6 t