Welcome
Thank you for purchasing our intelligent video surveillance server (IVSS)!
This quick start guide will help you become familiar with our device in a very short time.
Before installation and operation, please read the following safeguard and warning carefully!
Important Safeguard and Warning
The following description is the correct application method of the device. Please read the
manual carefully before use, in order to prevent danger and property loss. Strictly conform
to the manual during application and keep it properly after reading.
Operating Requirements
Do not place and install the device in an area exposed to direct sunlight or near
heat generating device.
Do not install the device in a humid, dusty or fuliginous area.
Please keep its horizontal installation, or install it at stable places, and prevent it
from falling.
Do not drip or splash liquids onto the device; do not put on the device anything
lled with liquids, in order to prevent liquids from owing into the device.
Please install the device at well-ventilated places; do not block its ventilation
opening.
Use the device only within rated input and output range.
Do not dismantle the device arbitrarily.
Please transport, use and store the device within allowed humidity and
temperature range.
Power Requirement
Please make sure to use batteries according to requirements; otherwise, it may
result in re, explosion or burning risks of batteries!
To replace batteries, only the same type of batteries can be used!
The product shall use electric cables (power cables) recommended by this area,
which shall be used within its rated specication!
Please make sure to use standard power adapter supplied with the device, or
the user shall undertake resulting personal injuries or device damages.
Please use power supply that meets SELV (safety extra low voltage)
requirements, and supply power with rated voltage that conforms to Limited
Power Source in IEC60950-1. For specic power supply requirements, please
refer to device labels.
Products with category I structure shall be connected to grid power output
socket, which is equipped with protective grounding.
Appliance coupler is a disconnecting device. During normal use, please keep
an angle that facilitates operation.
