Dell Latitude E6430 Manual

Dell Bærbare computer Latitude E6430

Læs nedenfor 📖 manual på dansk for Dell Latitude E6430 (85 sider) i kategorien Bærbare computer. Denne guide var nyttig for 39 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/85
Dell Latitude E6430 / E6430 ATG
Dell Latitude E6430 / E6430 ATG
Dell Latitude E6430 / E6430 ATG
Dell Latitude E6430 / E6430 ATGDell Latitude E6430 / E6430 ATG
Owner's Manual
Owner's Manual
Owner's Manual
Owner's ManualOwner's Manual
Regulatory Model: P25G
Regulatory Model: P25G
Regulatory Model: P25G
Regulatory Model: P25GRegulatory Model: P25G
Regulatory Type: P25G001, P25G002
Regulatory Type: P25G001, P25G002
Regulatory Type: P25G001, P25G002
Regulatory Type: P25G001, P25G002Regulatory Type: P25G001, P25G002
Notes, Cautions, and Warnings
Notes, Cautions, and Warnings
Notes, Cautions, and Warnings
Notes, Cautions, and WarningsNotes, Cautions, and Warnings
NOTE:
NOTE:
NOTE:
NOTE: NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
problem.
problem.
problem.problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2012 Dell Inc.
2012 Dell Inc.
2012 Dell Inc.
2012 Dell Inc. 2012 Dell Inc.
Trademarks used in this text: Dell
, the DELL logo, Dell Precision
, Precision ON,ExpressCharge, Latitude, Latitude ON
,
OptiPlex, Vostro, and Wi-Fi Catcher are trademarks of Dell Inc. Intel®, Pentium®, Xeon®, Core, Atom, Centrino®, and Celeron®
are registered trademarks or trademarks of Intel Corporation in the U.S. and other countries. AMD
® is a registered trademark and
AMD Opteron, AMD Phenom, AMD Sempron, AMD Athlon, ATI Radeon, and ATI FirePro are trademarks of Advanced Micro
Devices, Inc. Microsoft®, Windows®, MS-DOS®, Windows Vista®
, the Windows Vista start button, and Office Outlook
® are either
trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Blu-ray Disc
is a trademark
owned by the Blu-ray Disc Association (BDA) and licensed for use on discs and players. The Bluetooth
® word mark is a registered
trademark and owned by the Bluetooth® SIG, Inc. and any use of such mark by Dell Inc. is under license. Wi-Fi® is a registered
trademark of Wireless Ethernet Compatibility Alliance, Inc.
2012 - 06
Rev. A00
Contents
Contents
Contents
ContentsContents
Notes, Cautions, and Warnings
Notes, Cautions, and Warnings
Notes, Cautions, and Warnings
Notes, Cautions, and WarningsNotes, Cautions, and Warnings...................................................................................................2
...................................................................................................2
...................................................................................................2
...................................................................................................2...................................................................................................2
1 Working on Your Computer
1 Working on Your Computer
1 Working on Your Computer
1 Working on Your Computer1 Working on Your Computer.......................................................................................................7
.......................................................................................................7
.......................................................................................................7
.......................................................................................................7.......................................................................................................7
Before Working Inside Your Computer.....................................................................................................................7
Turning Off Your Computer.......................................................................................................................................8
After Working Inside Your Computer........................................................................................................................8
2 Removing and Installing Components
2 Removing and Installing Components
2 Removing and Installing Components
2 Removing and Installing Components2 Removing and Installing Components 11
11
11
1111
...................................................................................
...................................................................................
...................................................................................
......................................................................................................................................................................
Recommended Tools..............................................................................................................................................11
Removing the ATG Handle......................................................................................................................................11
Installing the ATG Handle.......................................................................................................................................11
Removing the ATG Port Covers..............................................................................................................................12
Installing the ATG Port Covers................................................................................................................................12
Removing the Secure Digital (SD) Card..................................................................................................................12
Installing the Secure Digital (SD) Card...................................................................................................................13
Removing the ExpressCard.....................................................................................................................................13
Installing the ExpressCard......................................................................................................................................13
Removing the Battery.............................................................................................................................................14
Installing the Battery..............................................................................................................................................14
Removing the Subscriber Identity Module (SIM) Card...........................................................................................14
Installing the Subscriber Identity Module (SIM) Card............................................................................................14
Removing the Base Cover.......................................................................................................................................15
Installing the Base Cover........................................................................................................................................15
Removing the Keyboard Trim..................................................................................................................................15
Installing the Keyboard Trim...................................................................................................................................16
Removing the Keyboard..........................................................................................................................................16
Installing the Keyboard...........................................................................................................................................18
Removing the Hard Drive........................................................................................................................................19
Installing the Hard Drive.........................................................................................................................................20
Removing the Optical Drive....................................................................................................................................20
Installing the Optical Drive.....................................................................................................................................22
Removing the Memory............................................................................................................................................22
Installing the Memory.............................................................................................................................................23
Removing the Wireless Local Area Network (WLAN) Card...................................................................................23
Installing the WLAN Card.......................................................................................................................................24
Removing the Heat Sink..........................................................................................................................................24
Installing the Heat Sink...........................................................................................................................................25
Removing the Processor.........................................................................................................................................26
Installing the Processor..........................................................................................................................................26
Removing the Bluetooth Card.................................................................................................................................26
Installing the Bluetooth Card..................................................................................................................................28
Removing the Coin-Cell Battery..............................................................................................................................28
Installing the Coin-Cell Battery...............................................................................................................................28
Removing the ExpressCard Cage............................................................................................................................29
Installing the ExpressCard Cage.............................................................................................................................29
Removing the Media Board....................................................................................................................................30
Installing the Media Board.....................................................................................................................................31
Removing the Power-Connector Port.....................................................................................................................31
Installing the Power-Connector Port......................................................................................................................32
Removing the Power LED Board.............................................................................................................................33
Installing the Power LED Board..............................................................................................................................34
Removing the Modem Card....................................................................................................................................34
Installing the Modem Card.....................................................................................................................................35
Removing the Modem Connector...........................................................................................................................35
Installing the Modem Connector............................................................................................................................37
Removing the Input/Output (I/O) Board..................................................................................................................37
Installing the Input Output (I/O) Board....................................................................................................................38
Removing the Hard-Drive Support Plate.................................................................................................................38
Installing the Hard-Drive Support Plate..................................................................................................................39
Removing the Palmrest...........................................................................................................................................40
Installing the Palmrest............................................................................................................................................41
Removing the System Board...................................................................................................................................42
Installing the System Board....................................................................................................................................45
Removing the Display Assembly.............................................................................................................................45
Installing the Display Assembly..............................................................................................................................47
Removing the Display Bezel...................................................................................................................................48
Installing the Display Bezel.....................................................................................................................................49
Removing the Display Panel...................................................................................................................................49
Installing the Display Panel....................................................................................................................................50
Removing the Display-Hinge Caps..........................................................................................................................50
Installing the Display-Hinge Caps...........................................................................................................................51
Removing the Display Hinges.................................................................................................................................52
Installing the Display Hinges..................................................................................................................................53
Removing the Camera.............................................................................................................................................53
Installing the Camera..............................................................................................................................................54
Removing the LVDS and Camera Cable..................................................................................................................54
Installing the LVDS and Camera Cable...................................................................................................................55
Removing the Speakers..........................................................................................................................................56
Installing the Speakers...........................................................................................................................................57
10
2
2
2
22
Removing and Installing Components
Removing and Installing Components
Removing and Installing Components
Removing and Installing ComponentsRemoving and Installing Components
This section provides detailed information on how to remove or install the components from your computer.
Recommended Tools
Recommended Tools
Recommended Tools
Recommended ToolsRecommended Tools
The procedures in this document may require the following tools:
Small flat-blade screwdriver
Phillips screwdriver
Small plastic scribe
Removing the ATG Handle
Removing the ATG Handle
Removing the ATG Handle
Removing the ATG HandleRemoving the ATG Handle
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove the screws that secure the ATG handle to the computer.
3.
3.
3.
3.3. Remove the right ATG port cover.
Installing the ATG Handle
Installing the ATG Handle
Installing the ATG Handle
Installing the ATG HandleInstalling the ATG Handle
1.
1.
1.
1.1. Secure the ATG handle by tightening it with the screws.
2.
2.
2.
2.2. Follow the procedures in
After Working Inside Your Computer
.
11
Removing the ATG Port Covers
Removing the ATG Port Covers
Removing the ATG Port Covers
Removing the ATG Port CoversRemoving the ATG Port Covers
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove the screws on the right ATG port cover.
3.
3.
3.
3.3. Remove the right ATG port cover.
4.
4.
4.
4.4. Repeat the steps 1 and 2 to remove the left ATG port cover.
Installing the ATG Port Covers
Installing the ATG Port Covers
Installing the ATG Port Covers
Installing the ATG Port CoversInstalling the ATG Port Covers
1.
1.
1.
1.1. Place the ATG port covers and tighten the screws that secure it to the computer.
2.
2.
2.
2.2. Follow the procedures in
After Working Inside Your Computer
.
Removing the Secure Digital (SD) Card
Removing the Secure Digital (SD) Card
Removing the Secure Digital (SD) Card
Removing the Secure Digital (SD) CardRemoving the Secure Digital (SD) Card
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Press in on the SD card to release it from the computer.
12
3.
3.
3.
3.3. Slide the SD card out of the computer.
Installing the Secure Digital (SD) Card
Installing the Secure Digital (SD) Card
Installing the Secure Digital (SD) Card
Installing the Secure Digital (SD) CardInstalling the Secure Digital (SD) Card
1.
1.
1.
1.1. Slide the SD card into its slot until it clicks into place.
2.
2.
2.
2.2. Follow the procedures in
After Working Inside Your Computer.
Removing the ExpressCard
Removing the ExpressCard
Removing the ExpressCard
Removing the ExpressCardRemoving the ExpressCard
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Press in on the ExpressCard to release it from the computer.
3.
3.
3.
3.3. Slide the ExpressCard out of the computer.
Installing the ExpressCard
Installing the ExpressCard
Installing the ExpressCard
Installing the ExpressCardInstalling the ExpressCard
1.
1.
1.
1.1. Slide the ExpressCard into its slot until it clicks into place.
2.
2.
2.
2.2. Follow the procedures in
After Working Inside Your Computer.
13
Removing the Battery
Removing the Battery
Removing the Battery
Removing the BatteryRemoving the Battery
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Slide the release latches to unlock the battery and flip the battery out of the computer.
Installing the Battery
Installing the Battery
Installing the Battery
Installing the BatteryInstalling the Battery
1.
1.
1.
1.1. Slide the battery into its slot until it clicks into place.
2.
2.
2.
2.2. Follow the procedures in
After Working Inside Your Computer.
Removing the Subscriber Identity Module (SIM) Card
Removing the Subscriber Identity Module (SIM) Card
Removing the Subscriber Identity Module (SIM) Card
Removing the Subscriber Identity Module (SIM) CardRemoving the Subscriber Identity Module (SIM) Card
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove the battery.
3.
3.
3.
3.3. Remove the SIM card from the computer.
Installing the Subscriber Identity Module (SIM) Card
Installing the Subscriber Identity Module (SIM) Card
Installing the Subscriber Identity Module (SIM) Card
Installing the Subscriber Identity Module (SIM) CardInstalling the Subscriber Identity Module (SIM) Card
1.
1.
1.
1.1. Slide the SIM card into its slot.
2.
2.
2.
2.2. Install the battery.
3.
3.
3.
3.3. Follow the procedures in
After Working Inside Your Computer
.
14
Removing the Base Cover
Removing the Base Cover
Removing the Base Cover
Removing the Base CoverRemoving the Base Cover
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove the screws that secure the base cover to the computer.
3.
3.
3.
3.3. Lift the base cover to remove it from the computer.
Installing the Base Cover
Installing the Base Cover
Installing the Base Cover
Installing the Base CoverInstalling the Base Cover
1.
1.
1.
1.1. Place the base cover to align with the screw holes on the computer.
2.
2.
2.
2.2. Tighten the screws to secure the base cover to the computer.
3.
3.
3.
3.3. Install the battery.
4.
4.
4.
4.4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Keyboard Trim
Removing the Keyboard Trim
Removing the Keyboard Trim
Removing the Keyboard TrimRemoving the Keyboard Trim
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove the battery.
3.
3.
3.
3.3. Using a plastic scribe, pry under the keyboard trim to release it from the computer.
15
4.
4.
4.
4.4. Pry the keyboard trim along the sides and bottom.
5.
5.
5.
5.5. Lift up to remove the keyboard trim from the unit.
Installing the Keyboard Trim
Installing the Keyboard Trim
Installing the Keyboard Trim
Installing the Keyboard TrimInstalling the Keyboard Trim
1.
1.
1.
1.1. Align the keyboard trim to its slot.
2.
2.
2.
2.2. Press along the sides of the keyboard trim until it clicks in place.
3.
3.
3.
3.3. Install the battery.
4.
4.
4.
4.4. Follow the procedures in
After Working Inside Your Computer.
Removing the Keyboard
Removing the Keyboard
Removing the Keyboard
Removing the KeyboardRemoving the Keyboard
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) keyboard trim
3.
3.
3.
3.3. Remove the screws that secure the keyboard to computer.
16
4.
4.
4.
4.4. Remove the screws that secure the keyboard to the palmrest assembly.
5.
5.
5.
5.5. Lift and turn the keyboard to access the keyboard cable.
6.
6.
6.
6.6. Disconnect the keyboard cable from the system board.
7.
7.
7.
7.7. Remove the keyboard from the computer.
17
8.
8.
8.
8.8. Peel back the adhesive tape securing the keyboard connector.
9.
9.
9.
9.9. Remove the keyboard cable from the keyboard.
Installing the Keyboard
Installing the Keyboard
Installing the Keyboard
Installing the KeyboardInstalling the Keyboard
1.
1.
1.
1.1. Connect the keyboard cable and secure it to the keyboard using the tape.
2.
2.
2.
2.2. Connect the keyboard cable to the system board.
3.
3.
3.
3.3. Slide the keyboard into its compartment and ensure that it clicks into place.
4.
4.
4.
4.4. Tighten the screws to secure the keyboard on the palmrest.
5.
5.
5.
5.5. Flip the computer and tighten the screws to secure the keyboard.
6.
6.
6.
6.6. Install:
a) keyboard trim
b) battery
7.
7.
7.
7.7. Follow the procedures in
After Working Inside Your Computer
.
18
Removing the Hard Drive
Removing the Hard Drive
Removing the Hard Drive
Removing the Hard DriveRemoving the Hard Drive
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove the battery.
3.
3.
3.
3.3. Remove the screws that secure the hard drive to the computer.
4.
4.
4.
4.4. Slide the hard drive out of the computer.
5.
5.
5.
5.5. Remove the screw that secures the hard-drive caddy to the hard drive.
6.
6.
6.
6.6. Remove the hard-drive caddy from the hard drive.
19
7.
7.
7.
7.7. Remove the hard-drive isolation from the hard drive.
Installing the Hard Drive
Installing the Hard Drive
Installing the Hard Drive
Installing the Hard DriveInstalling the Hard Drive
1.
1.
1.
1.1. Install the hard-drive isolation on the hard drive.
2.
2.
2.
2.2. Attach the hard-drive caddy to the hard drive.
3.
3.
3.
3.3. Tighten the screws to secure the hard-drive caddy to the hard drive.
4.
4.
4.
4.4. Slide the hard drive into the computer.
5.
5.
5.
5.5. Tighten the screws to secure the hard drive to the computer.
6.
6.
6.
6.6. Install the battery.
7.
7.
7.
7.7. Follow the procedures in
After Working Inside Your Computer
.
Removing the Optical Drive
Removing the Optical Drive
Removing the Optical Drive
Removing the Optical DriveRemoving the Optical Drive
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove the battery.
3.
3.
3.
3.3. Press the optical-drive latch to release the optical drive from the computer.
20
4.
4.
4.
4.4. Pull the optical drive from the computer.
5.
5.
5.
5.5. Remove the screw that secures the optical-drive latch to the optical drive assembly.
6.
6.
6.
6.6. Push the optical-drive latch forward and remove it from the optical-drive assembly.
7.
7.
7.
7.7. Remove the screws that secure the optical-drive latch bracket to the optical-drive assembly
8.
8.
8.
8.8. Remove the latch bracket from the optical drive.
21
4.
4.
4.
4.4. Remove the memory module from its connector on the system board.
5.
5.
5.
5.5. Repeat steps 2 and 3 to remove the second memory module.
Installing the Memory
Installing the Memory
Installing the Memory
Installing the MemoryInstalling the Memory
1.
1.
1.
1.1. Insert the memory module into the memory socket.
2.
2.
2.
2.2. Press the securing clips to secure the memory module to the system board.
3.
3.
3.
3.3. Install:
a) base cover
b) battery
4.
4.
4.
4.4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Wireless Local Area Network (WLAN) Card
Removing the Wireless Local Area Network (WLAN) Card
Removing the Wireless Local Area Network (WLAN) Card
Removing the Wireless Local Area Network (WLAN) CardRemoving the Wireless Local Area Network (WLAN) Card
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) base cover
3.
3.
3.
3.3. Disconnect the antenna cables from the WLAN card.
23
4.
4.
4.
4.4. Remove the screw that secures the WLAN card to the computer.
5.
5.
5.
5.5. Remove the WLAN card from its slot on the system board.
Installing the WLAN Card
Installing the WLAN Card
Installing the WLAN Card
Installing the WLAN CardInstalling the WLAN Card
1.
1.
1.
1.1. Insert the WLAN card into its connector at a 45–degree angle into its slot.
2.
2.
2.
2.2. Connect the antenna cables to their respective connectors marked on the WLAN card.
3.
3.
3.
3.3. Tighten the screw to secure the WLAN card to the computer.
4.
4.
4.
4.4. Install:
a) base cover
b) battery
5.
5.
5.
5.5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Heat Sink
Removing the Heat Sink
Removing the Heat Sink
Removing the Heat SinkRemoving the Heat Sink
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
24
a) battery
b) base cover
3.
3.
3.
3.3. Disconnect the heat-sink cable.
4.
4.
4.
4.4. Remove the screws that secure the heat sink to the system board.
5.
5.
5.
5.5. Remove the heat sink from the computer.
Installing the Heat Sink
Installing the Heat Sink
Installing the Heat Sink
Installing the Heat SinkInstalling the Heat Sink
1.
1.
1.
1.1. Slide the heat sink into its original position in the system board.
2.
2.
2.
2.2. Tighten the screws to secure the heat sink to the system board
3.
3.
3.
3.3. Connect the heat-sink cable to the system board.
4.
4.
4.
4.4. Install:
a) base cover
b) battery
5.
5.
5.
5.5. Follow the procedures in
After Working Inside Your Computer
.
25
Removing the Processor
Removing the Processor
Removing the Processor
Removing the ProcessorRemoving the Processor
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) base cover
c) heat sink
3.
3.
3.
3.3. Rotate the processor cam lock in a counter-clockwise direction.
4.
4.
4.
4.4. Remove the processor from the computer.
Installing the Processor
Installing the Processor
Installing the Processor
Installing the ProcessorInstalling the Processor
1.
1.
1.
1.1. Align the notches on the processor and the socket, and insert the processor into the socket.
2.
2.
2.
2.2. Rotate the processor cam lock in a clockwise direction.
3.
3.
3.
3.3. Install:
a) heat sink
b) base cover
c) battery
4.
4.
4.
4.4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Bluetooth Card
Removing the Bluetooth Card
Removing the Bluetooth Card
Removing the Bluetooth CardRemoving the Bluetooth Card
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) hard drive
26
c) base cover
3.
3.
3.
3.3. Remove the screw that secures the bluetooth card to the computer.
4.
4.
4.
4.4. Lift up the card along the bottom edge and remove it from the housing.
5.
5.
5.
5.5. Disconnect the bluetooth cable from the system board and remove the card from the computer.
6.
6.
6.
6.6. Disconnect the cable from the bluetooth card.
27
Installing the Bluetooth Card
Installing the Bluetooth Card
Installing the Bluetooth Card
Installing the Bluetooth CardInstalling the Bluetooth Card
1.
1.
1.
1.1. Connect the bluetooth cable to the bluetooth card.
2.
2.
2.
2.2. Place the bluetooth card in its slot.
3.
3.
3.
3.3. Ensure that it is secured in its slot by tightening the screw.
4.
4.
4.
4.4. Install:
a) base cover
b) hard drive
c) battery
5.
5.
5.
5.5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
Removing the Coin-Cell Battery
Removing the Coin-Cell Battery
Removing the Coin-Cell BatteryRemoving the Coin-Cell Battery
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) base cover
3.
3.
3.
3.3. Disconnect the coin-cell battery cable.
4.
4.
4.
4.4. Pry the coin-cell battery upward and remove it from the computer.
Installing the Coin-Cell Battery
Installing the Coin-Cell Battery
Installing the Coin-Cell Battery
Installing the Coin-Cell BatteryInstalling the Coin-Cell Battery
1.
1.
1.
1.1. Place the coin-cell battery in its slot.
2.
2.
2.
2.2. Connect the coin-cell battery cable.
3.
3.
3.
3.3. Install:
a) base cover
28
f) hard drive
g) base cover
h) battery
4.
4.
4.
4.4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Media Board
Removing the Media Board
Removing the Media Board
Removing the Media BoardRemoving the Media Board
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) base cover
c) hard drive
d) bluetooth card
e) keyboard trim
f) keyboard
g) display assembly
h) palmrest
3.
3.
3.
3.3. Disconnect the media board cable from the system board.
4.
4.
4.
4.4. Remove the screws that secure the media board to the computer.
5.
5.
5.
5.5. Remove the media board from the computer.
30
Installing the Media Board
Installing the Media Board
Installing the Media Board
Installing the Media BoardInstalling the Media Board
1.
1.
1.
1.1. Place the media board in its compartment.
2.
2.
2.
2.2. Tighten the screws to secure the media board.
3.
3.
3.
3.3. Connect the media board cable to the system board.
4.
4.
4.
4.4. Install:
a) palmrest
b) display assembly
c) keyboard
d) keyboard trim
e) bluetooth card
f) hard drive
g) base cover
h) battery
5.
5.
5.
5.5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Power-Connector Port
Removing the Power-Connector Port
Removing the Power-Connector Port
Removing the Power-Connector PortRemoving the Power-Connector Port
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) base cover
3.
3.
3.
3.3. Disconnect the power-connector cable from the system board.
4.
4.
4.
4.4. Remove the screw that secures the power-connector bracket to the computer.
31
5.
5.
5.
5.5. Remove the power-connector bracket from the computer.
6.
6.
6.
6.6. Remove the power-connector cable from the computer.
Installing the Power-Connector Port
Installing the Power-Connector Port
Installing the Power-Connector Port
Installing the Power-Connector PortInstalling the Power-Connector Port
1.
1.
1.
1.1. Connect the power-connector cable to the computer.
2.
2.
2.
2.2. Install the power-connector bracket to its position in the computer.
3.
3.
3.
3.3. Tighten the screw to secure the power-connector bracket to the computer.
4.
4.
4.
4.4. Connect the power-connector cable to the system board.
5.
5.
5.
5.5. Install:
a) base cover
b) battery
6.
6.
6.
6.6. Follow the procedures in
After Working Inside Your Computer
.
32
Removing the Power LED Board
Removing the Power LED Board
Removing the Power LED Board
Removing the Power LED BoardRemoving the Power LED Board
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) base cover
c) hard drive
d) bluetooth module
e) keyboard trim
f) keyboard
g) display assembly
h) display bezel
i) display panel
3.
3.
3.
3.3. Disconnect the power LED board cable.
4.
4.
4.
4.4. Remove the screw securing the power LED board to the display assembly.
5.
5.
5.
5.5. Remove the power LED board from the display assembly.
33
Installing the Power LED Board
Installing the Power LED Board
Installing the Power LED Board
Installing the Power LED BoardInstalling the Power LED Board
1.
1.
1.
1.1. Place the power LED board in its compartment in the display assembly.
2.
2.
2.
2.2. Tighten the screw to secure the LED board to the display assembly.
3.
3.
3.
3.3. Connect the power LED board cable to the display assembly.
4.
4.
4.
4.4. Install:
a) display panel
b) display bezel
c) display assembly
d) keyboard
e) keyboard trim
f) bluetooth module
g) hard drive
h) base cover
i) battery
5.
5.
5.
5.5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Modem Card
Removing the Modem Card
Removing the Modem Card
Removing the Modem CardRemoving the Modem Card
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) base cover
c) keyboard trim
d) keyboard
3.
3.
3.
3.3. Remove the screw that secures the modem card to the computer.
4.
4.
4.
4.4. Pull out the tab from underneath the palmrest assembly.
34
5.
5.
5.
5.5. Use the tab and pull the lower right edge of the modem card from the slot.
6.
6.
6.
6.6. Hold and remove the modem card from the computer.
Installing the Modem Card
Installing the Modem Card
Installing the Modem Card
Installing the Modem CardInstalling the Modem Card
1.
1.
1.
1.1. Insert the modem card in its slot
2.
2.
2.
2.2. Ensure that the modem card is seated.
3.
3.
3.
3.3. Tighten the screw to secure the modem card.
4.
4.
4.
4.4. Install:
a) keyboard
b) keyboard trim
c) base cover
d) battery
5.
5.
5.
5.5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Modem Connector
Removing the Modem Connector
Removing the Modem Connector
Removing the Modem ConnectorRemoving the Modem Connector
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) base cover
c) hard drive
d) bluetooth card
e) keyboard trim
f) keyboard
g) display assembly
h) palmrest
i) media board (available in E6430/E6430 ATG only)
35
j) ExpressCard cage
k) system board
3.
3.
3.
3.3. Disconnect the modem-card cable from the modem card.
4.
4.
4.
4.4. Remove the modem cable from the routing channel.
5.
5.
5.
5.5. Remove the screw that secures the modem-connector bracket to the computer.
6.
6.
6.
6.6. Remove the modem-connector bracket from the computer.
7.
7.
7.
7.7. Remove the modem connector from the computer.
36
Installing the Modem Connector
Installing the Modem Connector
Installing the Modem Connector
Installing the Modem ConnectorInstalling the Modem Connector
1.
1.
1.
1.1. Place the modem connector in its compartment.
2.
2.
2.
2.2. Place the modem-connector bracket on the connector.
3.
3.
3.
3.3. Tighten the screw to secure the modem-connector bracket.
4.
4.
4.
4.4. Route the modem connector cable.
5.
5.
5.
5.5. Connect the modem-card cable to the modem card.
6.
6.
6.
6.6. Install:
a) system board
b) ExpressCard cage
c) media board (available in E6430/E6430 ATG only)
d) palmrest
e) display assembly
f) keyboard
g) keyboard trim
h) bluetooth card
i) hard drive
j) base cover
k) battery
7.
7.
7.
7.7. Follow the procedures in
After Working Inside Your Computer
.
Removing the Input/Output (I/O) Board
Removing the Input/Output (I/O) Board
Removing the Input/Output (I/O) Board
Removing the Input/Output (I/O) BoardRemoving the Input/Output (I/O) Board
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) base cover
c) hard drive
d) optical drive
e) bluetooth card
f) keyboard trim
g) keyboard
h) display assembly
i) palmrest
j) media board (available in E6430/E6430 ATG only)
k) ExpressCard cage
l) system board
37
3.
3.
3.
3.3. Remove the screw that secures the I/O board to the computer.
4.
4.
4.
4.4. Remove the I/O board from the computer.
Installing the Input Output (I/O) Board
Installing the Input Output (I/O) Board
Installing the Input Output (I/O) Board
Installing the Input Output (I/O) BoardInstalling the Input Output (I/O) Board
1.
1.
1.
1.1. Place the I/O board in its compartment.
2.
2.
2.
2.2. Tighten the screws to secure the I/O board.
3.
3.
3.
3.3. Install:
a) system board
b) ExpressCard cage
c) media board (available in E6430/E6430 ATG only)
d) palmrest
e) display assembly
f) keyboard
g) keyboard trim
h) bluetooth card
i) hard drive
j) optical drive
k) base cover
l) battery
4.
4.
4.
4.4. Follow the procedures in
After Working Inside Your Computer
.
Removing the Hard-Drive Support Plate
Removing the Hard-Drive Support Plate
Removing the Hard-Drive Support Plate
Removing the Hard-Drive Support PlateRemoving the Hard-Drive Support Plate
1.
1.
1.
1.1. Follow the procedures in
Before Working Inside Your Computer
.
2.
2.
2.
2.2. Remove:
a) battery
b) base cover
38


Produkt Specifikationer

Mærke: Dell
Kategori: Bærbare computer
Model: Latitude E6430
Bredde: 352 mm
Dybde: 241 mm
Vægt: 2014 g
Produktfarve: Sort
Skærm diagonal: 14 "
Skærmopløsning: - pixel
Wi-Fi: Ja
Bluetooth: Ingen
Antal HDMI-porte: 1
DVI-port: Ingen
Ethernet LAN-porte (RJ-45): 1
Antal USB 2.0-porte: 2
Antal USB 3.2 Gen 1 (3.1 Gen 1) type-A-porte: 2
Ethernet LAN: Ja
Wi-Fi-standarder: Wi-Fi 4 (802.11n)
Processorkerner: 2
Ethernet LAN-datahastigheder: 10,100,1000 Mbit/s
Intern hukommelse: 8 GB
Operativsystem installeret: Windows 7 Professional
Kabelteknologi: 10/100/1000Base-T(X)
Indbygget kortlæser: Ja
HDD kapacitet: 500 GB
LED-baggrundsbelysning: Ja
Batterilevetid (maks.): - t
Intel® Wireless Display (Intel® WiDi): Ja
Bæredygtighedscertifikater: EPEAT Silver, ENERGY STAR
Processorfrekvens: 2.8 GHz
Processorserie: Intel® Core™ i5
Processor boost frekvens: 3.5 GHz
Processortråde: 4
Processor-cache: 3 MB
Processor cache type: Smart cache
Intern hukommelsestype: DDR3-SDRAM
Hukommelsesur hastighed: 1600 Mhz
Maksimal intern hukommelse: 8 GB
Samlet lagringskapacitet: 500 GB
Lagermedie: HDD
On-board grafikkort, model: Intel® HD Graphics 4000
On-board grafikkort: Ja
Indbygget grafikadapterfamilie: Intel® HD Graphics
Indbygget mikrofon: Ja
Mikrofonindgang: Ingen
S/PDIF-udgang: Ingen
Docking-stik: Ja
ExpressCard-slot: Ja
Cardbus PCMCIA slot type: Ingen
Opladningsport type: DC-in-stik
Pegeredskab: Touchpad
Numerisk tastatur: Ingen
Intel® Hyper Threading Teknologi (Intel® HT Technology): Ja
Intel® Turbo Boost Teknologi: 2.0
Slot til kabellås: Ingen
Hukommelsesstik: 2x SO-DIMM
Processorproducent: Intel
Processormodel: i5-3360M
Antal VGA-porte (D-sub): 1
Infrarød dataport: Ingen
Kombineret hovedtelefon/mikrofon-port: Ja
Enhanced Intel SpeedStep Teknologi: Ja
Udfør deaktivering af bit: Ja
Idle status: Ja
CPU-konfiguration (maks.): 1
Intel® VT-x with Extended Page Tables (EPT): Ja
Indlejret tilgængelige muligheder: Ingen
Intel® 64: Ja
Intel® Virtualization Technology for Directed I/O (VT-d): Ja
Intel® Virtualization Technology (VT-x): Ja
Netværksfunktioner: Gigabit Ethernet
Bus type: DMI
Processorgeneration: 3rd gen Intel® Core™ i5
Intel® Flex Memory Access: Ja
Intel® Trusted Execution Teknologi: Ja
Intel® Enhanced Halt State: Ja
Intel® klar video teknologi: Ingen
Intel® Identity Protection Technology version: 1.00
Intel® Secure Key Technology version: 1.00
Konfliktfri processor: Ja
Processor sokkel: BGA 1023
Processor litografi: 22 nm
Stepping: L1
Thermal Design Power (TDP): 35 W
Maksimalt antal PCI Express-kanaler: 16
PCI Express slots version: 3.0
PCI Express-konfigurationer: 1x16, 2x8, 1x8+2x4
Fejlkorrigerende kode understøttet af processor: Ingen
Tjunction: 105 °C
Processor front side bus: - Mhz
Systembus-hastighed: 5 GT/s
Processor driftstilstande: 64-bit
Processor kodenavn: Ivy Bridge
FSB Paritet: Ingen
Integreret 4G WiMAX: Ja
Intel® InTru™ 3D Teknologi: Ja
Intel® Clear Video HD Teknologi (Intel® CVT HD): Ja
Intel® Insider™: Ja
Intel® Sikker Nøgle: Ja
Intel® My WiFi Teknologi (Intel® MWT): Ja
Intel® Anti-Theft Teknologi (Intel® AT): Ja
Intel® Identity Protection Teknologi (Intel® IPT): Ja
Intel® Quick Sync Video Teknologi: Ja
Intel® AES Nye Instruktioner (Intel® AES-NI): Ja
Intel® Demand Based Switching: Ingen
Termiske overvågningsteknologier: Ja
Intel® Dual Display Capable Teknologi: Ja
Intel® FDI Teknologi: Ja
Intel® Rapid Storage Teknologi: Ingen
Intel® Fast Memory Access: Ja
Intel® Clear Video Teknologi til MID (Intel® CVT for MID): Ingen
Processor-pakke størrelse: 37.5 x 37.5 (rPGA988B); 31.0 x 24.0 (BGA1023) mm
Processor kode: SR0MW
Grafisk og IMC litografi: 22 nm
Processor ARK ID: 64895
Antal installerede HDD'er: 1
Indbygget grafikadapter basefrekvens: 650 Mhz
Indbygget grafikadapter dynamisk frekvens (maks.): 1200 Mhz
CPU-multiplikator (bus/kerneforhold): 28
Indbygget grafikadapter-ID: 0x166
Understøttede instruktionssæt: AVX
Intel® Smart Cache: Ja
Højde (front): 26.6 mm
Højde (bagside): 32.4 mm
Bundkort chipsæt: Intel® QM77 Express
Antal eSATA/USB 2.0-porte: 1
Grafikadapter familie: Intel

Har du brug for hjælp?

Hvis du har brug for hjælp til Dell Latitude E6430 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Bærbare computer Dell Manualer

Bærbare computer Manualer

Nyeste Bærbare computer Manualer