DeLonghi TCH8093ER Manual

DeLonghi Varmeapparat TCH8093ER

Læs gratis den danske manual til DeLonghi TCH8093ER (3 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 146 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 73.5 anmeldelser. Har du et spørgsmål om DeLonghi TCH8093ER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

INTRODUCTION

Thank you for choosing a De’Longhi product.

Please take a few minutes to read these instructions.

This will avoid all risks and damage to the appliance.

IMPORTANT SAFEGUARDS

- Do not use the appliance near showers, bathtubs, sinks,

swimming pools, etc.

- Always use the appliance in an upright position.

- Do not use the appliance to dry laundry. Do not obstruct

the air intake and outlet grilles (danger of overhea-

ting).

- The appliance is not intended for use by persons (inclu-

ding children) with reduced physical, sensory or men-

tal capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety. Children should be supervised to ensure

that they do not play with the appliance.

- The heater must be positioned at least 50 cm from furni-

ture or other objects.

- Do not use the appliance near walls, furniture, curtains,

etc.

- The use of extension leads is not recommended.

However if they cannot be avoided, follow the instruc-

tions accompanying the extension lead and never exce-

ed the power limit marked on the extension.

- If the power cable is damaged, it must be replaced by

the manufacturer, an authorised service centre or a qua-

lied electrician in order to eliminate all risk.

- The appliance must not be placed immediately under a

xed power socket.

- Do not use the appliance in rooms with a oor area of

less than 4m2.

- Before putting the appliance away, make sure it is com-

pletely o and unplugged from the mains socket. Wrap

the cable around the base. Do not store in dusty atmos-

pheres.

- Room temperature should be between 0 and 30° C.

- Do not rest anything on the appliance.

- To avoid the safety system resetting accidentally, this

appliance must not be powered through an external on/

o device such as a timer, or connected to a circuit which

is turned o and on regularly by the energy supplier.

IMPORTANT: To avoid overheating, never under

any circumstances cover the appliance during

operation as this would lead to a dangerous rise in

temperature.

Safety functions

- the appliance is tted with a safety Safety device:

device which switches it o in the event of accidental

overheating (e.g. obstruction of air intake and outlet

grilles, motor turning slowly or not at all).

To reset, unplug the appliance from the mains socket for

a few minutes, remove the cause of overheating then

plug in again.

- a tip over safety device turns Tip over safety device:

the appliance o if it falls over or is positioned inappro-

priately in such a way as to jeopardise safety.

The appliance emits a beep and a dot ashes on the di-

splay. The appliance resumes operation a few seconds

after being placed in an upright position again.

Disposing of the appliance

In compliance with European directive 2002/96/EC,

the appliance must not be disposed of with house-

hold waste, but taken to an authorised waste separa-

tion and recycling centre.

Important safeguards en

Description/Use en

DESCRIPTION

(see g. 1)

A ON/STAND-BY button

B +/- adjustment buttons

C MODE button (selects the operating mode)

D “ECO plus” button

E Timer button

F Swing button

G Remote control receiver

H Indicator light

I Air intake grille

J Filter

USE

Installation

- The appliance can be used on any horizontal surface.

Do not overload the electrical circuit. Avoid using the

same socket for other appliances.

Electrical connection

Before plugging the appliance into the mains socket, check

that the mains power supply corresponds to the value

indicated on the rating plate and that the mains power

supply is adequate for the load.

- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/EEC

ON RADIO INTERFERENCE SUPPRESSION.

Mounting the base

- Fit the two parts of the base together, matching the

guide pins on the front with the recesses on the back

and snapping the two clips into place (g. A and g. B).

- Turn the appliance upside down and x the base to the

body with the 6 screws supplied (g. C).

Operation and use

1. Plug into the mains socket.

2. The appliance emits a beep. The indicator light ( ) comes H

on and remains lit while the appliance is powered.

3. The appliance switches to stand-by. A dot ashing on

the display means the tip over device has been activated.

See paragraph: “Safety functions”.

Press the ON/STAND-BY ( ) to turn the appliance on. It A

begins heating the room according to the current settings.

5. Press the MODE button ( ) to select one of the following C

operating modes:

Fan

Freeze prevention

Heating 1

Heating 2

Heating 3

5.1 Fan

In this mode, only the fan operates and the appliance does

not heat the room.

5.2 Freeze prevention

In this mode, the appliance keeps the room at a temperature

of 7°C to avoid freezing.

5.3 Heating 1, 2 and Heating 3

In this mode, the desired temperature can be selected by

pressing the adjustment buttons + and – ( ): B

- Heating 1

The appliance operates at low power, reducing noise

levels and energy consumption to a minimum.

- Heating 2

The appliance operates at medium power.

- Heating 3

The appliance operates at high power to heat the room

rapidly.

6. ECO plus” function“

The ECO plus” function is available in Heating 1, 2 and 3 “

modes only.

To activate the function, press the ECO plus” button ( ). “ D

When this function is active the appliance automatically sets

the most appropriate power level to guarantee optimum

comfort while reducing energy consumption.

While the ECO plus” function is active, the appliance may “

switch automatically to a lower heating power than the one

displayed. This may happen a number of times in an hour.

7. To distribute the air ow over a wider surface, press the

swing button ( ) . The appliance starts swinging to F

the right and left. To stop the appliance in the desired

position, simply press the swing button ( ) again.F

8. To turn the appliance o, press the ON/STAND-BY button

( ). The display may visualize a countdown for about 6 A

seconds.

Please note: Room temperature can be displayed in either °C

or °F. To change the unit of measurement for the temperature,

press the + button for a few seconds, then release.

Digital 24 h timer

This function can be activated from any operating mode.

Auto-start: with the appliance in STAND-BY, press the timer

button (E) . The symbol is displayed together with

the time remaining before the appliance comes on. To adjust

Produkt Specifikationer

Mærke:	DeLonghi
Kategori:	Varmeapparat
Model:	TCH8093ER
Justerbar termostat:	Ja
Varmeevne:	2400 W
Varmestrøm (min.):	800 W
Velegnet til rumvolumen på op til:	70 m³
Vekselstrømsindgangsspænding:	220 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	275 mm
Dybde:	269 mm
Højde:	695 mm
Placeringsmuligheder:	Gulv
Produktfarve:	Black, White
Varmekilde:	Elektrisk