Denver DV-10201 Manual

Denver Ikke kategoriseret DV-10201

Læs gratis den danske manual til Denver DV-10201 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Denver DV-10201, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
ACT-1301 MK2 Quick Start Guide
Appearance and key introduction
Key/Indi
cator
Function
Power
On/Off
Power the camera on or off. When opening the
menu, switch over between normal (effect
parameters and replay of image, video) and
setup menu.
Shutter
In recording video mode, it is used to start/stop
recording. In capture mode, it is used as a
shutter. In replay mode; it is used to play the
video. When operating the menu, it is used to
confirm the selection.
Up key
Digital zoom in (capture/video mode); menu
selection (after opening the menu); pause,
continue playing (when playing and recording
video in replay mode).
OK key
Open/exit from menu. Stop playing (when
replaying video).
Down key
Digital zoom out (capture/video mode); menu
selection (after opening the menu).
Mode
switch
Switch over among modes of capture, video and
replay.
Operation
indicator
The upper one is
a charging
indicator.
In power-off state, it keeps
constant lighting when the
charger is connected for
charging.
The lower one is
an operation
indicator.
It flashes once during
capturing, and it keeps
constant lighting when
connected with computer
portable disk.
Start Use
1. Charge built-in lithium battery
In power-off state, when the camera is connected with computer,
charging begins. At this time, the charger indicator lights and it turns off
when charged full. Generally, it costs 2-4 hours to charge full.
2. Use memory card
1. Follow the instructions carved by slot of the memory card, it is to insert
FT card into the card slot till entirely inserted.
2. To take the FT card out, after gently pressing the end of the memory
card inwards, the card will reject out.
Please notice: UHS (ultra highspeed) cards doesn’t work, as they
are not 100% backward compatible
Note: The camera is not equipped with a built-in memory, and thus
a memory card is required.
3. Power On/Off:
3.1 Power-on: If to press and hold POWER key for 3 seconds, the
screen starts up and the camera enters startup state.
3.2 Power-off: In idle state of the camera, if to click POWER key, the
camera turns off.
Automatic power-off: When idle time set for the camera reaches, it
automatically turns off to save power. The default time of the
system automatic power-off is 5 minutes;
3.3 Power-off due to low battery: In case of extremely low battery, the
icon “ ”appears on the LCD screen. Please timely
charge the battery. When the icon turns red and flashes, the
camera will automatically power off.
4. Functional mode switchover
The camera is equipped with three modes: capture, video and replay
mode. After power-on, the modes can be switched over with MODE
switch.
5. Indicators
Operation indicator: When the camera works (e.g. recording video,
capturing or automatic screen turn-off), the
operation indicator lights.
Charger indicator: Constant lighting is to remind user that the
camera is being charged.
6 Video mode
( With maximum 29 minutes video recording per sequence)
When pushing Mode switch to video mode, click shutter in
preview state to start recording video; to stop video recording,
it is to click it again. It will also automatically stop recording in
case that no free room left in the memory card or the battery is
over low:
1 00:00:01: time-meter, indicating 1 second left for recording
(indicating 1 second recorded during recording).
2 : mode icon: indicates the current mode is video
recording.
3 : loop recording video time icon: indicates the current loop
video recording time is 3 minutes.
4 : movie size: indicates the current movie size is 720P.
5 : indicates currently a memory card is inserted.
6 : magnification of digital zoom: press Up and down key to
adjust zoom among 1x-4x.
7 : battery icon: indicates current battery level.
8 : white balance icon: indicates the current white balance
mode is automatic.
9 ：metering icon: indicates it is currently the pan overall
perspective metering.
Video menu setup
In video mode, press OK key to open menu, and then press Up and
Down key to select menu. When selecting menu, background of the
selected item will be highlighted. Press Shutter to enter sub-menu. In
sub-menu, press Up and Down key for selection, press Shutter for
confirmation and back to main menu. In the main menu, press OK
USB Cable
Mode switch:
-Photograph
-Video
-Replay
Lens
Power
On/Off
Shutter
Charging indicator
Operation indicator
Up key
OK key
Down key
LCD TFT

Produkt Specifikationer

Mærke: Denver
Kategori: Ikke kategoriseret
Model: DV-10201

Har du brug for hjælp?

Hvis du har brug for hjælp til Denver DV-10201 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Denver Manualer

Denver

Denver SAX-10 Manual

5 Oktober 2024
Denver

Denver SCO-65110 Manual

29 September 2024
Denver

Denver VR-20 Manual

16 September 2024
Denver

Denver DTB-144 Manual

8 September 2024
Denver

Denver WT-10510BLACKMK2 Manual

19 August 2024
Denver

Denver GCO-610 Manual

11 August 2024
Denver

Denver NBQ-15147SES Manual

26 Juli 2024
Denver

Denver PFF-1160H Manual

13 Juli 2024
Denver

Denver DSC-5000 MK2 Manual

2 Maj 2024
Denver

Denver SCO-80100 Manual

3 Januar 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vaxis

Vaxis Litecomm 8S Manual

6 December 2025
Advantech

Advantech ABDNA-ER-IN5010 Manual

6 December 2025
ELO

ELO I-Series 4 E747123 Manual

6 December 2025
Bosch

Bosch SPV4EMX24F Manual

6 December 2025
Compex

Compex Sport Elite Manual

6 December 2025
Fostex

Fostex P650K Manual

6 December 2025
Opticis

Opticis DVFC-100 Manual

6 December 2025
Fostex

Fostex P800K Manual

6 December 2025
Bosch

Bosch WAN24055PL Manual

6 December 2025
Zotac

Zotac GAMING GeForce RTX 5060 Ti 16GB Twin Edge Manual

6 December 2025