Digital Watchdog MegaPix DWC-MV72WI28ATW Manual

Digital Watchdog Overvågningskamera MegaPix DWC-MV72WI28ATW

Læs gratis den danske manual til Digital Watchdog MegaPix DWC-MV72WI28ATW (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Digital Watchdog MegaPix DWC-MV72WI28ATW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

STEP 1 – PREPARING TO MOUNT THE CAMERA

STEP 2 – CABLING THE CAMERA TO EXTERNAL DEVICES

1. The mounting surface must withstand ﬁve times the camera weight.

2. Do not let the cables get caught in improper places or the electric line cover can be damaged. This may cause a

short or ﬁre.

3. For the installation process, remove the dome cover from the camera module by loosening the three (3) screws on

the dome. Use the wrench provided with the camera.

4. Using the mounting template sheet or the camera itself, mark and drill the necessary holes in the wall or ceiling.

Pass the wires through the mount bracket and make all necessary connections.

1. NETWORK CONNECTIONS - If you are using a PoE switch, connect the camera using an Ethernet cable for both

data and power.

2. NETWORK CONNECTIONS - If you are using a non-PoE switch, connect the camera to the switch using an

Ethernet cable for data transmission and use a power adapter to power the camera.

Models Power requirements Power consumption

DWC-MV72Di4TW, DWC-MV72Di28T DC 12V, PoE IEEE 802.3af

Class2. (Adapter not included)

DC12V: max 3.7W

PoE: max 5.4W

DWC-MV72Wi28TW, DWC-MV72Wi4TW,

DWC-MV72Wi6TW, DWC-MV72Wi28ATW,

DWC-MV72Wi4ATW

DC 12V, PoE IEEE 802.3af

Class2. (Adapter not included)

DC12V: max 3.7W

PoE: max 5.5W

DWC-MV75Wi28TW, DWC-MV75Wi4TW,

DWC-MV75Wi6TW

DC 12V, PoE IEEE 802.3af

Class3. (Adapter not included)

DC12V: max 6W

PoE: max 7.2W

Quick Start Guide Quick Start Guide

WHAT’S IN THE BOX

Quick

Setup and

Installation

Guide

1 set Bolt and

Nuts 2pcs 1 set

Mounting

Templates 1

Screws

and Plastic

Anchors -

2pcs

1 set

Waterproof

Cap 1 set Star

Wrench 1

Resetting the camera: To reset the

camera’s settings, including the network

settings, use the tip of a paper clip or a

pencil. Press the reset button for ﬁve

(5) seconds.

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours:

9:00 AM – 8:00 PM EST, Monday through Friday

digital-watchdog.com

Attention: This document is intended to serve as a quick reference for the initial

set-up. It is recommended that the user read the entire instruction manual for

complete and proper installation and usage.

NOTE: Download all your support materials and tools in one place

1. Go to: http://www.digital-watchdog.com/resources

2. Search your product by entering the part number in the

‘Search by Product’ search bar. Results for applicable

part numbers will populate automatically based on the

part number you enter.

3. Click ‘Search’. All supported materials, including manuals

and quick start guide (QSGs) will appear in the results.

3. The camera is equipped with a manual IR activation button.

You can choose to disable the camera’s IR LEDs when the

installation environment requires so.

4. Adjust the camera’s lens position by rotating the

camera on its three-axis gimbal.

5. When assembling the dome back on the camera, align the

screw holes in the dome and the camera’s base.

6. When the installation is complete, remove the dome’s

protective ﬁlm.

STEP 3 – INSTALLING THE CAMERA

1. Attach the main body to the mount bracket by tightening the

lock screw.

2. To use the camera’s waterproof wiring:

a. Install the LAN cable into .

b. will be assembled

to with a 1/4 turn.

c. Thread tightly to .

NOTE: To ensure moisture seal, make sure the o-ring is in place

between and . In extreme environments use of an

outdoor rated sealer is recommended.

a b

NOTE: When using the waterproof cap, crimp the RJ45 connector

after passing the cable through the waterproof cap.

Default Login Information: admin | admin

When logging into the camera for the ﬁrst time, you will be prompted

to set up a new password. You can set the new password using the

DW® IP Finder™ software or directly from the camera’s browser menu.

5MP models 2.1MP/1080p models with

microphone built-in 2.1MP/1080p models

DWC-MV75Wi28TW DWC-MV72Wi28ATW DWC-MV72Di4TW

DWC-MV75Wi4TW DWC-MV72Wi4ATW DWC-MV72Di28T

DWC-MV75Wi6TW DWC-MV72Wi28TW

DWC-MV72Wi4TW

DWC-MV72Wi6TW

Mounting Template

Protective

ﬁlm

LED

on/off

Reset button

Microphone built-in

(DWC-MV72Wi28ATW,

DWC-MV72Wi4ATW models)

Quick Start Guide

Rev Date: 07/20

Speciﬁcations and pricing are subject to change without notice.

Installation using the mounting bolt and screws

1. Using the mounting template, mark

and drill the necessary holes on the

mounting surface.

2. Secure the two long mounting screws

to the camera’s base.

3. Pass the wires through and make

all the necessary connections.

4. Rotate the locking disks over the

screws until the camera holds tightly

from the mounting surface.

STEP 6 – WEB VIEWER

The GUI display may dier by camera models.

STEP 5 – DW® IP FINDER™

Thumbnail view

Firmware version

DHCP status

Camera’s uptime

Open IP conﬁguration

settings

Ping camera

Port information

Gateway address

Netmask address

Camera’s MAC address

Filter results

Scan network

Select network to scan

Show/hide thumbnail view

Refresh thumbnail view

Bulk password assignment

Bulk IP assignment

Firmware upgrade

Camera’s name

Camera’s IP address

Part number

Use the DW® IP Finder™ software to scan the network and detect all MEGApix®

cameras, set the camera’s network settings, or access the camera’s web client.

Network Setup

1. To install the DW IP Finder™, go to ®

http://www.digital-watchdog.com

2. Enter “DW® IP Finder” on the search box at the

top of the page.

3. Go to the “Software” tab on the DW® IP Finder™

page to download the installation ﬁle.

4. Follow the installation to install the DW® IP

Finder™. Open the DW IP Finder™ and click ®

‘Scan Devices’. It will scan the selected network

for all supported devices and list the results in

the table. During the scan, the DW® logo will

turn gray.

Select DHCP to allow the camera to receive its IP

address automatically from the DHCP server.

Select “Static” to manually enter the camera’s

IP address, (Sub)Netmask, Gateway and DNS

information.

* The camera’s IP must be set to Static if

connecting to

Spectrum® IPVMS

Contact your network administrator for more

information.

Default TCP/IP information: DHCP

5. When connecting to the camera for the ﬁrst time,

a password must be set. To set up a password for

your new camera:

a. Check the box next to your new camera from the

IP Finder’s search results. You can select multiple

cameras.

‘Port forwarding’ has to be set in your

network’s router for external access to

the camera.

b. Click “Bulk Password Assign” on

the left.

c. In the pop-up window, enter

admin/ admin in the

current username and password

ﬁelds. Enter a new username

and password to the right.

d. Press “change” to apply all

changes.

6. Select a camera from the list by

double-clicking on the camera’s

image or clicking on the ‘Click’

button under the IP Conf. column.

The pop-up window will show

the camera’s current network

settings, allowing admin users to

adjust the settings as needed.

7. To access the camera’s web page,

go to the IP Conﬁg page and click

on the ‘View Camera Website’.

8. To save the changes made to

the camera’s setting, input the

username and password of the

camera and click Apply.

NOTE: Some menu options may not be available based on the

camera model. See the full manual for more information.

NOTE: 32bit version of the VLC player must be installed. If you are

using a 64bit system, uninstall the previous 64bit version

and reinstall using the 32bit version.

Once the camera’s network settings have been setup properly, you can

access the camera’s web viewer using the DW IP Finder® ™.

To open the camera’s web viewer:

1. Find the camera using the DW® IP Finder™.

2. Double-click on the camera’s view in the results table.

3. Press the ‘View Camera Website’. The camera’s web viewer will

open up in your default web browser.

4. Enter the camera’s username and password you setup in the DW®

IP Finder™. If you did not setup a new username and password via

the DW® IP Finder™, you will not be able to view video from the

camera. A message will direct you to setup a new password for the

camera to view video.

5. When accessing the camera for the ﬁrst time, install the VLC player

for web ﬁles to view video from the camera.

STEP 4 – MANAGING THE SD CARD

The following models include a local SD card slot:

DWC-MV72Wi28ATW, DWC-MV72Wi4ATW,

DWC-MV72Wi28TW, DWC-MV72Wi4TW,

DWC-MV72Wi6TW, DWC-MV75Wi28TW,

DWC-MV75Wi4TW, DWC-MV75Wi6TW

1. To install the camera’s SD Card, locate the SD

card slot in the back of the camera module.

2. Insert a class 10 SD card into the SD card slot by

pressing the SD card slot.

3. To remove the SD Card, press the card inward to

release from the card slot.

Insert SD Card Remove SD Card

STEP 3 – INSTALLING THE CAMERA (cont.)

Produkt Specifikationer

Mærke:	Digital Watchdog
Kategori:	Overvågningskamera
Model:	MegaPix DWC-MV72WI28ATW

Har du brug for hjælp?

Hvis du har brug for hjælp til Digital Watchdog MegaPix DWC-MV72WI28ATW stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Digital Watchdog Manualer

Digital Watchdog MegaPix DWC-MB95WI Manual

1 December 2024

Digital Watchdog MEGApix DWC-MV72DI Manual

1 December 2024

Digital Watchdog MEGApix DWC-MPF2WI Manual

1 December 2024

Digital Watchdog MEGApix DWC-MF2WI Manual

1 December 2024

Digital Watchdog Star-Light DWC-D3263TIR Manual

1 December 2024

Digital Watchdog DWC-B6263WTIR 2.1MP Outdoor Universal HD Analog Bullet Camera wit Manual

1 December 2024

Digital Watchdog MEGApix CaaS DWC-MB44WIAWC Manual

30 November 2024

Digital Watchdog MegaPix DWC-MVA2WiAT Manual

30 November 2024

Digital Watchdog MegaPix CaaS DWC-MB44WI650C6 Manual

30 November 2024

Digital Watchdog MegaPix DWC-MV72WI4A Manual

30 November 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

1 August 2025

31 Juli 2025

31 Juli 2025

31 Juli 2025

FLIR ioi HD CB-5222 Manual

30 Juli 2025

Eufy Cam S3 Pro Manual

30 Juli 2025

Telycam Vision+ 4KN 30X Manual

30 Juli 2025

Marshall Electronics CV630-BI Manual

30 Juli 2025

Telycam Vision+ SE Manual

30 Juli 2025

FLIR Ariel CC-3405 Manual

29 Juli 2025