Dimplex ALM20E Manual

Dimplex Ikke kategoriseret ALM20E

Læs gratis den danske manual til Dimplex ALM20E (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Dimplex ALM20E, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
Dimplex Pro Engine Range
Models: ENG56-400 E, ENG68-400 E, ENG56-600 E
These instructions should be read carefully and
retained for future use. Note also the information
presented on the appliance.
OPERATING
INSTRUCTION MANUAL
08/53883/0 ISSUE 6 OCN 11777
EN: This product is only suitable for well insulated rooms or occasional use. DE: Dieses Produkt ist nur für gut isolierte Bereiche oder
gelegentliche Verwendung geeignet. FR: Ce produit convient uniquement à des endroits bien isolés ou pour un usage occasionnel.
IT: Questo prodotto è adatto solo per spazi ben isolati o per uso occasionale. ES: Este producto sólo es adecuado para espacios
bien aislados o un uso ocasional. NL: Dit product is uitsluitend geschikt voor goed geïsoleerde ruimten of voor sporadisch gebruik.
PL: Produkt ten jest odpowiedni wyłącznie do dobrze odizolowanych miejsc lub do okazjonalnego użytku. NO: Dette produktet egner
seg kun for godt isolerte rom eller sporadisk bruk. RO: Acest produs este adecvat exclusiv spaţiilor bine ventilate sau utilizării ocazionale.
CZ: Tento výrobek je vhodný pouze do dobře izolovaných prostor nebo k příležitostnému použití. DK: Dette produkt er kun egnet til
velisolerede rum eller lejlighedsvis brug. PT: Este produto somente é adequado para espaços bem isolados ou uso ocasional. SE: Denna
produkt är endast avsedd för välisolerade utrymmen eller tillfällig användning. FI: Tämä tuote soveltuu ainoastaan hyvin eristettyihin tiloihin
tai satunnaiseen käyttöön. SK: Tento výrobok je vhodný len pre dobre izolované priestory alebo na občasné použitie. SI: Ta izdelek je
primeren le za dobro izolirane prostore ali za občasno uporabo. HR: Ovaj proizvod je pogodan samo za dobro izolirane prostore ili
povremenu upotrebu. HU: Ez a termék csak jól szigetelt terekhez vagy eseti használatra alkalmas
This product complies with all the required Product Safety, Electromagnetic Compatibility and Environmental
Standards. This product is fully compliant with the LVD, EMC, RoHS and Eco Design Directives.
6
Switching on the appliance
Press and hold the ENTER button for 3 seconds to activate the remote control. FIRE will be displayed and
ON will be blinking. Press ENTER to swtich ON the appliance. The lamps light up and the flame effect sets
in after approx. 45 seconds.
Adjust the Flame Setting
With the remote control activated. FIRE will be displayed and OFF flashes on the display. Press UP button
until FIRE symbol flashes. Press ENTER. The current flame setting will be displayed F1-F6. Press the UP and
DOWN buttons to adjust the setting, product beep once selection is been made. After you have selected
your flame setting press BACK to exit the menu and return to the home screen.
Select the Heater Setting
You have the option of setting the heating high (HI), low (LO) or completely interrupting heating (OFF).
Connect the remote control to the device if you have not already done so. Use the UP and DOWN buttons to
navigate to the symbol flashes. Press the ENTER key 21°C is displayed on the screen and OFF flashes,
heating starts. Then press and hold the ADV button until HI/LO or OFF appears (the respective default
setting flashes). Use UP and DOWN buttons to select the setting you want. Confirm your setting with the
ENTER key. The screen goes back and 21°C is displayed OFF flashes. If you now confirm OFF with the enter
key, the heating switches off and the screen goes back to the home screen.
NOTE: With the OFF setting, heating is completely switched off and cannot be started using the hand
setting. If heating is required, we recommend the setting LO or HI.
Setting the Thermostat
With the remote control activated. Navigate with the up / down buttons to the hand symbol . The hand
symbol flashes. Press the ENTER key 21°C appears and the heating starts, OFF flashes. However, this
only applies if the presetting LO or HI has been made before. The heating operation runs until the room
temperature of 21°C is reached. With the up / down buttons you can adjust your desired temperature if
necessary. If you choose to switch off the heating operation you can interrupt the heating by pressing
ENTER button while OFF flashing. The program then goes back to home screen.
Thermal Safety Cut-out
A thermal safety cut-out is incorporated in the fan heater to prevent damage due to overheating. This can
happen if the heat outlet was restricted in any way. If the cut-out operates, unplug the heater from the
socket outlet and allow approximately 10 minutes before reconnecting. Before switching the heater back on
remove any obstruction that may be restricting the heat outlet, then continue normal operation.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance
must not be supplied through an external switching device, such as a timer, or connected to a switch that is
regularly switched on and off by the utility.
Setting the Date and Time
To set the date and time on the heater; with the remote control activated navigate UP/DOWN button to Date
& Time icon
1. Press Enter when the is blinking
2. Press and to set the Hour, press Enter
3. Press and to set the Minutes, press Enter to confirm the time
4. Press and to set the Day, press Enter
5. Press and to set the Month, press Enter
6. Press and to set the Year, press Enter to confirm the year
7. Press and to select ON/OFF for the Daylight saving time, press Enter to confirm and returns to home
screen.

Produkt Specifikationer

Mærke: Dimplex
Kategori: Ikke kategoriseret
Model: ALM20E

Har du brug for hjælp?

Hvis du har brug for hjælp til Dimplex ALM20E stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Dimplex Manualer

Dimplex

Dimplex QRAD200E Manual

12 Januar 2025
Dimplex

Dimplex Optiflame 3D GLN20BR3D Manual

30 December 2025
Dimplex

Dimplex CFH90 Manual

5 Oktober 2024
Dimplex

Dimplex OCR20Tie Manual

1 Oktober 2024
Dimplex

Dimplex OPH13 Manual

29 September 2024
Dimplex

Dimplex GLN20BR Manual

18 September 2024
Dimplex

Dimplex SRX120EM Manual

17 September 2024
Dimplex

Dimplex CAB10ER Manual

12 September 2024
Dimplex

Dimplex RFM Manual

6 September 2024
Dimplex

Dimplex CAS400NH Manual

31 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Aiphone

Aiphone GT-4ZP Manual

15 Juni 2025
Moulinex

Moulinex Secanto DJAB41 Manual

15 Juni 2025
Blodgett

Blodgett Invoq 201E Manual

15 Juni 2025
Vocopro

Vocopro FIELD-QUAD-H Manual

15 Juni 2025
ORNO

ORNO OR-DB-MK-175P Manual

15 Juni 2025
Milwaukee

Milwaukee M12 HSFSM Manual

15 Juni 2025
Berkel

Berkel Suprema Salumeria PES370 Manual

15 Juni 2025
Bugaboo

Bugaboo Butterfly 2 car seat adapters Manual

15 Juni 2025
ORNO

ORNO OR-CR-278 Manual

15 Juni 2025
Wahoo

Wahoo BLUE SC Manual

15 Juni 2025