Dimplex CAB20WR Manual

Dimplex Ikke kategoriseret CAB20WR

Læs gratis den danske manual til Dimplex CAB20WR (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Dimplex CAB20WR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Commercial Products

Quick Start Guide

Patch Lead Construction

1. Tools 2. Remove outer sheath 3. Removing the sheath 4. Cut string

In addition to category 5e UTP

(unshielded twisted pair) cable

you will need, scissors, crimping

tool, RJ45 plugs and cable testers

Taking care not to cut the inner

cables remove a length of

insulating sheath

Discard the sheath to reveal the

four parts of the twisted cable within

Cut off the little length of string

that is inside the sheath

5. Separate pairs of wires 6. Separate wires 7. Straighten wires 8. Pull wires

Separate out the four pairs

of wires

Separate wires to ease crimping Straighten wires to aid wire colour

identification

Firmly pull the wires between

finger and thumb

9. Flatten wires 10. Trim wires 11. Fit RJ45 socket 12. Correct colours

With wires almost parallel, make

sure the correct colour order:

white/orange, orange, white/

green, blue, white/blue, green,

white/brown, brown

With flat and parallel cable wires in

the correct order, trim to leave

12mm protruding from the sheath

Push wires into the plug so they

reach in fully. Ensure enough

sheath is inside the plug so it will be

physically gripped when crimped

Check you have the correct colour

order before crimping. This colour

order is called 568B and is

common for CAT5 cable networks

13. Crimping Tool 14. Crimping 15. Finished Plug 16. Test

Place the plug into the tool so that

the sheath is also trapped

Firmly crimp the plug so all wires

and sheath are trapped

Visually inspect to ensure correct

colour sequence

Test the finished cable using a

suitable cable tester

Maximum total cable length 90m

This guide is for reference only

Produkt Specifikationer

Mærke:	Dimplex
Kategori:	Ikke kategoriseret
Model:	CAB20WR

Har du brug for hjælp?

Hvis du har brug for hjælp til Dimplex CAB20WR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Dimplex Manualer

Dimplex CAS1000R Manual

30 Juli 2025

Dimplex QRAD200E Manual

12 Januar 2025

Dimplex Optiflame 3D GLN20BR3D Manual

30 December 2025

Dimplex CFH90 Manual

5 Oktober 2024

Dimplex OCR20Tie Manual

1 Oktober 2024

Dimplex OPH13 Manual

29 September 2024

Dimplex GLN20BR Manual

18 September 2024

Dimplex SRX120EM Manual

17 September 2024

Dimplex CAB10ER Manual

12 September 2024

Dimplex RFM Manual

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Dahua Technology XVR8208A-4K-I Manual

26 Oktober 2025

Dahua Technology HAC-HFW1500T-A-POC Manual

26 Oktober 2025

Dahua Technology HAC-HDBW1230R-Z-POC Manual

26 Oktober 2025

Dahua Technology EVS5148S Manual

26 Oktober 2025

Dahua Technology HAC-HDBW1400R-Z Manual

26 Oktober 2025

Dahua Technology EVS7136S Manual

26 Oktober 2025

Dahua Technology HAC-HFW1230T-A Manual

26 Oktober 2025

Microchip PIC16F87 Manual

25 Oktober 2025

Dahua Technology M70-4U-E Manual

25 Oktober 2025

Microchip PIC18F2620 Manual

25 Oktober 2025