Dymo LabelWriter SE450 Manual

Dymo Etiketprinter LabelWriter SE450

Læs gratis den danske manual til Dymo LabelWriter SE450 (76 sider) i kategorien Etiketprinter. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Dymo LabelWriter SE450, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/76

Technical Reference

DYMO LabelWriter SE450 Label Printer

No part of this document or the software may be reproduced or transmitted in any form or

by any means or translated into another language without the prior written consent of

Sanford, L.P.

Trademarks

LabelWriter and DYMO are trademarks or registered trademarks of Sanford, L.P. All other

trademarks are the property of their respective holders.

Description: Direct Thermal Printer

Model: LabelWriter SE450

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC (Federal Communications Committee) rules. These

limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency

energy, and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try correcting

the interference by one or more of the following measures:

nReorient the receiving antenna.

nIncrease the separation between the equipment and the receiver.

nConnect the equipment to an outlet on a circuit different from that to which the receiver

is connected.

nUse shielded cables to connect this device to computers.

nConsult the dealer or an experienced radio/TV technician for help.

nChanges or modifications to this unit not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment and void the

manufacturer’s warranty.

Certification

This device has been tested and complies with the requirements of:

UL 1950

EN60950: Low Voltage Directive Product Safety

FCC Part 15 Class B

EN55022: Radiated and Conducted Emissions B

EN50082-1: Generic Immunity ESD, RF, and Transient Susceptibility

Produkt Specifikationer

Mærke:	Dymo
Kategori:	Etiketprinter
Model:	LabelWriter SE450
Bredde:	125 mm
Dybde:	187 mm
Højde:	134 mm
Vægt:	550 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Pakkevægt:	1552 g
Pakkedybde:	232 mm
Pakkebredde:	142 mm
Pakkehøjde:	223 mm
USB-port:	Ja
Antal USB 2.0-porte:	1
Udskrivningsteknologi:	Direkte termisk
Maksimal opløsning:	203 x 203 dpi
Forbindelsesteknologi:	Ledningsført
LED-indikatorer:	Ja
Mac kompabilitet:	Ja
Medfølgende software:	DYMO SDK
Kompatible operativsystemer:	Windows\nMac\nLinux\nDOS
Hovedkassens længde (udvendigt):	490 mm
Hovedkassens bredde (udvendigt):	300 mm
Oprindelsesland:	Kina
Standard grænseflader:	USB 2.0,Serial
Drivere inkluderet:	Ja
Plug and play:	Ja
Bruttovægt af den udvendige papkasse:	6.660 kg
Antal udvendige papkasser:	4 stk
PC tilsluttet:	Ja
RS-232-porte:	1
Ydre emballage volumen:	35280 cm³
Indbyggede stregkoder:	1D,2D,CODABAR (NW-7),Code 129-Auto,EAN13,EAN8,Interleaved 2/5,ITF-14,POSTNET,UPC-A,UPC-E
RS-232 grænseflade:	Ja
Nettovægt for udvendig papkasse:	6.208 kg
Tilpasset kode:	8443321000
Pakke volumen:	7.3465 L