Easypix V500 Manual

Easypix Kamera V500

Læs gratis den danske manual til Easypix V500 (3 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Easypix V500, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Manual

1. Get to know your camera

1.1 Features

5.0 Mega pixels resolution sensor

Video clips

Web camera

Built-in flash Light

TV output

2.4” LTPS real color display

Internal 16MB flash memory and SD card support

Driver free for Windows XP/Vista and MAC 9.x and X.x

Macro mode

1.2 Specifications

Sensor

5.0 Mega pixel CMOS sensor

Image resolution

12.0 Mega pixels: (4032x3024) (Hardware Interpolation)

8.0 Mega pixels: (3264x2448) (Hardware Interpolation)

5.0 Mega pixels: (2560x1920)

3.0 Mega pixels: (2048x1536)

1.3 Mega pixels: (1280x960)

300K pixels: (640x480)

Lens

F/2.8 f=8.5mm

Focus range

0.5m. ~ Infinity

Macro mode

11cm – 18cm

Digital zoom

Flash strobe

Built-in (Auto/force/off)

LCD display

2.4” real color LTPS TFT

White balance

Auto/Daylight/cloudy/Tungsten/Fluorescent

Video mode

30fps@QVGA &20fps@VGA

Built-in memory

16MB Flash memory

Picture Capacity in

16M memory (The

quantity of pictures

varies and depends on

the complexity of the

scene)

VGA: (640x480) --138 Pictures

1.3M: (1280x960) -- 54Pictures

3.1M: (2048x1536) -- 28 Pictures

5.0M: (2560 x 1920) -- 21 Pictures

8.0M: (3264x2448) -- 14 Pictures

12M: (4032x3024) --3 Pictures

External memory card

SD card supports up to 8GB

File format

Picture: JPEG, Video: AVI, Voice: WAV

Self timer

2/10/10+2 seconds

PC interface

USB 1.1

TV-out NTSC/PAL

Power source 2xAAA alkaline batteries.

1.3 System requirement

Operating System

Windows XP/Vista or above

Mac 9.x or X.x

CPU

Pentium III or above

RAM

At least 64MB

Interface

USB port

4x speed CD ROM or above

2. Functional parts:

1920

13 14

23 21

5432

1Strap hook Hook for attaching the wrist strap to the camera.

2 Shutter Press this button to take photographs or to start/stop recording a short video

clip.

3Power on/off

button Press this button to turn on, press again to turn off.

4Self-timer Blinking when the self-timer function is operating.

indicator

5 Flash light Use the built-in flash to give the subject extra lighting if it is in dark

surroundings (the best flash distance is recommended within .).1.5m

6 Macro switch

Macro mode: Select this mode to take close-up photographs

(distance 11cm - 18cm).

Normal mode: Select this mode to take photographs from 0.5m - infinity

7USB

interface

Via this connection, you can download photographs and video clips to a

computer.

8AV port For television connection.

9 Lens

Records the image to be taken.

Note: Keep the lens clean. Dirt and fingerprints will affect the quality of the

picture.

10 LCD screen Display photographs, video clips, camera setting and menu.

11 Busy LED When the indicator is lit, the camera is busy.

12 Left/ display For menu LEFT selection, and LCD display on / off.

13 Menu For camera setting.

14 Mode Press it select different mode.to

15 UP UP & Digital zoom in

16 OK Press it to confirm changes.

17 Right/flash

light For menu right selection, and selection of flash light mode.

18 Down Down & Digital zoom out

19 Playback Press it to enter playback mode.

20 Delete Press it to delete the photo in playback mode.

21 Battery door 2xAAA alkaline batteries

22 SD card slot SD card slot.

23 Tripod

connector To fix the camera on tripod.

3. Details for camera setting

Size

12M pixel resolution 4032 x 3024

8.0M pixel resolution 3264 x 2448

5.0M pixel resolution 2560 x 1920

3.0M pixel resolution 2048 x 1536

1.3M pixel resolution 1280 x 960

VGA resolution 640 x 480

Quality Fine(Default)/Standard/

Economy Picture quality set

Scene

mode

Auto(Default)/Sport/Night/

Portrait/Landscape/Backlight Scene set

Exposure

value

+/-2, +/-5/3, +/-4/3,

+/-2/3,+/-1/3 +/-1, 0(Default) Level of exposure

White

balance

Auto (Default) Automatic white balance

Daylight White balance selected for daylight

surrounding

Cloudy White balance selected for cloudy

surrounding

Tungsten White balance selected for tungsten

lighting

Fluorescent White balance selected for fluorescent

surrounding

ISO Auto(Default)/100/200 Sensitivity select

Color Standard (Default) / Vivid /

Sepia / Monochrome Color setting

Saturation Normal(Default) / High /

Low

Saturation setting

Sharpness Normal(Default) / Hard /Soft Sharpness setting

Self timer

2s Set the delay time at 2s to take a picture

10s Set the delay time at 10s to take a picture

10+2s

Set the delay time at 10s to take a picture,

and then every 2s to take pictures

automatically.

Date Input Off(Default)/Set DD,MM,YYYY

Time Stamp Off(Default)/Date Only/Date

& Time Show the date and / or time on the pictures

Continuous

shoot Continuous shoot Can continuously shoot up to 3 pictures

within 10 seconds.

Format Execute/cancel Format the memory card.

Language

English(Default)/T-

Chinese/S-

Chinese/French/German/

Italian/Spanish/Portuguese

Select display language

Auto power

off 1/3/5 min and Off Auto power off in1min, 3min(default) or

5 min if no operation

Sys. Reset Execute/cancel Restore default setting

Light-

Frequency

(Flicker)

50Hz Main European electricity frequency

60Hz Main American electricity frequency

TV- Out NTSC American and Japanese video format

PAL European video format.

USB PC Cam Work as a web camera.

Disk Drive Act as a portable disk.

Note: The camera will remain the last setting when it is turned off.

4. Explanation of the status icons

Item Function Description

1 Battery indicator

The batteries are full.

The batteries are empty.

2 Recording mode

Setting for photographs taking

Setting for videos capture

3Date stamp Displays the date day/month/year

4Memory or SD card

indicator

Indicates memory or SD card

:Pictures stored in built-in memory

:Pictures stored in SD card

5 Photo / Video counter

Photo mode :No. of balance picture can be taken;

Video mode: Balance of recording time in second;

Playback mode: The No. of pictures or video clips

6 Selected Resolution

12M= 4032x3024;

8M= 3264x2448;

5M=2560x1920;

3.0M = 2048x1536;

1.3M=1280x960;

VGA=640x480;

7 Flash indicator

: Force flash.

: Auto Flash: The camera determines if the flash

must be used or not.

: No Flash: The flash is turned off.

8 Picture quality

The quality is fine (Default).

The quality is standard.

The quality is economy.

9 Brightness Alert Alert user to hold the camera steadily.

10 Normal / Macro

mode indicator

Normal mode (0.5m – infinity)

Macro mode (11cm –18cm)

11 View center

5. Using the camera

5.1 Installing the batteries

1. Open the battery door.

2. Insert 2 AAA alkaline batteries into the camera.

3. Turn on the camera.

Press the POWER button to turn it on (press it again to turn off).

5.2 Inserting a memory card (not included)

This camera has built-in internal memory. This memory can be extended with a SD memory card

(not included).

Follow the instructions given below to insert the optional SD memory card into the camera.

1. Turn off the camera first.

2. Insert the SD card into the camera.

Note: There is only one right direction to insert the SD memory card into the slot. Do not force

the card into the slot, or else it may damage both the camera and the SD memory card.

Note: The SD memory card must be formatted before taking photographs. See the following

sections for more information.

5.3 Formatting the memory or SD card

1. Press Menu button

2. Select Setup setting by right key.

3. Press OK to confirm and select by up or down key.

4. Press OK to format the card or memory.

5.4 Setting the resolution

The camera can be set to different resolutions.

1. Press MENU to set proper resolution.

Resolution: VGA 640X480 1280x960 3.0M (2048X1536), （），1.3M（）

5M (2560 x 1920), 8M (3264x2448), 12M (4032x3024)

2. Six different resolutions will be displayed. Select the desired resolution by using the ▲ or

▼buttons and then press the OK button to confirm the selection.

5.5 Taking photographs

1. Turn on the camera by pressing the ON/OFF button.

2. Press MODE to set the camera to photo mode ( ).

3. Depending on the distance to the object being photographed, use Macro switch to

adjust the distance. Select the flower symbol ( ) if you wish to take a close-up

photograph (11cm –18cm).

If you wish to take photograph of surroundings or people (0.5m - infinity), set the Macro

switch to Normal mode ( ).

4. If you are not sure if there is enough lighting, turn the automatic flash ( ) on by

pressing the flash button. (If the battery power is too low, the flash won’t be activated).

5. Use the LCD screen to aim the object you wish to photograph.

6. Press Shutter button and hold the camera steadily for 2 to 3 sec, until the LCD

display turn on again.

Caution: 1) Taking picture for fast-moving object is not recommended.

2) Image may be distorted when taking picture in a moving vehicle.

5.6 Zoom in and out

The camera can zoom in up to 8 times.

1. Zoom in by pressing the button, a number will appear on the display. 8.0 is the▲ or▼

maximum zoom.

2. You can zoom in by pressing the UP or DOWN button.

5.7 Taking photographs using self-timer function

You can use the self-timer function when you wish to take a photograph for yourself or when you

wish to photograph for an object where the camera must be as still as possible, for example on

the stand.

1. Set the camera to photo mode.

2. Press the MENU button. The quick menu will appear.

3. Press to self-timer mode, press OK and or to set the delay time: 2seconds / 10▼▲▼

seconds / 10+2seconds or off.

4. Press the OK button to confirm. The self-timer function is now ready for use.

5. Aim at the object you wish to photograph.

6. Press the SHUTTER button to take a photograph.

7. The self-timer indicator LED in the front will blink.

8. The photograph will be taken after the timer reaches the delay time that you pre-set, and

the camera will beep once.

5.8 Recording video clips

1. Press the MODE button to select the video clip mode.

2. Press the SHUTTER button to start recording video, press the SHUTTER button again to

stop recording. The video clip will now be saved as an AVI file in the camera memory.

3. Press MENU to set proper resolution, EV and WB, and press OK to confirm.

5.9 Playback photographs

1. Press PLAYBACK , press or to select the video clip or photo. button

2. Press , it will go to 2x zoom, press again to 3x zoom…… up to 8x.▲ ▲

3. Press “OK” and then Press , , or to shift the image.▲ ▼

4. Press MENU to select SLIDE SHOW, and then press to confirm. The pictures saved inOK

your camera or your SD card will be displayed in sequence automatically.

5.10 Playback video clips

1. When video clips are displayed, press OK to play, and press DOWN key to stop.

2. Press OK to pause the playback

3. Press Playback key to exit.

5.11 Delete photographs and video clips

You can choose to delete a single photograph / video clip, or delete all the photographs / video

clips in the memory.

5.11.1 Delete photograph

Follow the instructions given below to delete photograph.

1. Press PLAYBACK to enter the playback mode.

2. Press the MENU button and select D O All, press to confirm.elete ne/Delete OK

3. If you select Protect picture, your current file or images can not be deleted.

4. Press MENU to exit.

NOTE: Select ‘Deleting All’ and Press OK to confirm, all the pictures will be deleted.

5.11.2 Shortcut to delete one picture

1. Press PLAYBACK to enter Playback mode.

2. Select the photo (video) you want to delete, press DELETE button.

3. Press OK to confirm.

6. Installing the camera driver

The driver in the CD has to be installed, under following applications:

For Windows XP and Windows Vista: Using as a PC cam only. (Download picture /video is driver

free)

6.1 Uninstalling old drivers and devices

There is a chance for a conflict between the new driver and an existing driver in the computer. In

that case, it is better to remove those drivers before installing the new driver.

1. Enter Windows ‘Safe Mode’ (press F8 when starting Windows and then select ‘Safe

Mode’ from the menu which will be displayed).

2. Click on ‘Start – Settings – Control Panel’ and double-click on ‘Add/Remove Programs’

icon.

3. Find all the programs for similar, old devices and remove these by clicking on the

‘Add/Remove’ button. When in ‘Safe Mode’, it is possible for some programs to appear

twice. In that case, remove all the programs which appear twice.

4. Restart the computer.

6.2 Installing the driver for Windows XP Windows Vista/

Note: Make sure all other programs are closed during the installation process.

Note: During installation for Windows XP/Vista, you may receive a message saying that the

driver has not been signed. This does not cause a problem for the functionality of the

program. Please click "Yes" to continue.

Note: For example, ‘D: \’ is used to indicate the CD-ROM drive. This may be different for your

computer.

1. Insert the CD-ROM into your computer’s CD-ROM drive. The installation program will start

automatically. If it does not start automatically, please do the following:

a) Select 'Run' from Windows Start menu.

b) Type [D:\SETUP.EXE] and click on 'OK' to start the Software Installer.

2. The Software Installer will appear.

3. Select the language you wish to use for the installation.

4. Click on ‘Install driver‘to start the installation of the camera driver.

5. Follow the on-screen instructions.

6.3 Connecting the camera

The camera can be connected to the computer in two different modes: Mass Storage Device, or

as a PC camera for video conferencing on the Internet.

6.3.1 Connecting as a mass storage device

1. Turn the camera on by pressing the ON/OFF button.

2. Press MENU button and press RIGHT key to select the Setup setting.

3. Press button to set USB connection.▼

4. Press or button to choose the Disk Drive mode.▲▼

5. Press OK to confirm.

6. Connect the camera to the computer.

7. Windows will automatically detect the camera. You can use this camera as a removable

disk.

6.3.2 Connecting as a PC camera

When you connect the camera as a PC camera, you can use the camera as a web cam for video

conferencing on the Internet by using Windows NetMeeting or Windows Messenger.

(You must install the driver before connecting the Digital Camera to your computer.)

1. Turn the camera on by pressing the ON/OFF button.

2. Press MENU button and press RIGHT key to select the Setup setting.

3. Press button to chook USB connection.▼

4. Press or button to choose the PC camera mode.▲▼

5. Press OK to confirm.

6. Connect the camera to the computer.

7. Windows will automatically detect the camera. You can use this camera as a web camera.

7. Trouble shooting

Problem SolutionCause

Cannot turn on the camera by

pressing the “power” button.

Low battery power.

Battery placed at wrong

polarities.

Replace or install the battery

correctly.

Photos can not be saved

when taking pictures.

The memory card or

built-in memory hasn’t

been formatted properly.

Format the memory in SETUP

mode of the camera. Please refer

to section 5.3.

Cannot find removable disk

after connecting the camera

to the computer.

1. Connection failure.

2. The mode of the

camera is not set to

removable disk

properly

1. Make sure all cable connections

are secured and restart the

computer if necessary.

2. Set the camera to removable

disk mode, refer to section 6.3.1

(system setting, USB

connection).

Flash does not work. Battery Power is too

low.

Replace with new ALKALINE

battery.

The batteries used up very

fast.

Use wrong type of

battery.

Replace with new ALKALINE

battery.

The photos are over

exposure

Set the flash light to

force mode in bright

environment.

Set the Flash light to Auto mode

The photos are blurry

1. The camera is not

held steadily

2. The lens of camera is

dirty

3. The camera is Set to

wrong macro mode.

1. Hold the camera steadily until it

beeps when taking photo.

2. Clean the lens with soft dry

cloth.

3. Set the macro mode according

to the distances of subject.

Get a warning message:

“Capture device was not

detected” when trying to open

PC cam.

1. Conflict with another

camera or video

device.

2. The mode of the

camera is not set to

PC cam mode

properly.

1. Remove any other camera

driver completely from your

system. Sometimes you have to

re-install your system.

2. Set the camera to PC cam

mode, refer to section 6.3.2

(system setting, USB

connection).

Cannot preview image in PC

Camera mode.

“Preview” is not selected

in option Menu in PC.

Click “preview” in the “option”

menu to select it.

Produkt Specifikationer

Mærke:	Easypix
Kategori:	Kamera
Model:	V500
Bredde:	89 mm
Dybde:	26 mm
Højde:	57.5 mm
Vægt:	80 g
Produktfarve:	Sølv
Skærm diagonal:	2.4 "
Kompatible hukommelseskort:	SD
Batteriteknologi:	Alkaline
Understøttede videoformater:	AVI
Skærm:	LCD
Intern hukommelse:	16 MB
Strømforsyningstype:	3x AAA Alkaline batteries
Dimensioner (BxDxH):	89 x 26 x 57.5 mm
Videooptagelse:	Ja
Batteritype:	AAA
Indbygget mikrofon:	Ja
PictBridge:	Ja
Videofunktion:	Ja
Kompatible operativsystemer:	Windows 98SE/ 2000/ ME/ XP/ Vista, Mac 9.x or above
Hvidbalance:	Auto,Cloudy,Daylight,Fluorescent,Tungsten
Scenetilstande:	Night,Portrait
Skærmopløsning (numerisk):	- pixel
Flashtilstande:	auto,Flash off
Megapixel:	12 MP
Kameratype:	Kompakt kamera
Sensortype:	CMOS
Maksimal billedopløsning:	4032 x 3024 pixel
Billedstabilisator:	Ja
Billede sensor størrelse:	- "
Maksimal videoopløsning:	640 x 480 pixel
Bevægelse JPEG-billedhastighed:	30 fps
Optisk zoom:	- x
Digital zoom:	8 x
Autofokus (AF) tilstande:	Autofokus enkelt
Normal fokuseringsområde:	0.5 - ∞ m
Maksimal størrelse på hukommelseskort:	2 GB
Brændviddeområde:	2.5 - 8.5 mm
ISO-følsomhed:	Automatisk
Indbygget flash:	Ja
Digital SLR:	Ingen
Kameraets lukkerhastighed:	10 - 10000 sek./side
Realtidsvisning:	Ja
Brændvidde (svarende til 35 mm film):	0 mm
Makrofokuseringsområde (tele):	0.11 - 0.18 m