Easypix V912 Manual

Easypix Kamera V912

Læs gratis den danske manual til Easypix V912 (3 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Easypix V912, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Manual

1. Get to know your camera

9.0 Mega pixels resolution sensor

Digital still camera

Digital video camcorder

Built-in flash Light

8x digital zoom

2.7" TFT color display

Micro SD card support

2xAAA alkaline batteries

Smile detection

Anti-shaking still capture

2. Functional parts

1 Shutter Press this button to take photographs or to start /stop recording

a video clip,or to confirm changes in menu mode.

2 Power on/off button

Press this button to turn on, press again to turn off.

3 Strap hook Hook for attaching the wrist strap to the camera.

4 Busy indicator When the indicator is blinking,the camera is busy

5 Lens

Records the image to be taken.

Note: Keep the lens clean. Dirt and fingerprints will affect the

quality of the picture.

6 Flash light

Use the built-in flash to give the subject extra lighting if it is in

dark surrounding the best flash distance is recommended within （

1.5m).

7 Macro switch

Select this mode to take close-up Macro mode:

photographs (distance 11cm - 18cm).

Normal mode: Select this mode to take photographs from

0.5m - infinity.

8 LCD screen Display photographs, video clips, camera setting and menu.

9 Up Up & Digital zoom in.

10 Down Down & Digital zoom out.

11 Left / Flash light For LEFT selection in menu mode.

For flash light function selection in photo mode.

12 Right / Playback For RIGHT selection in menu mode.

Press it to enter playback mode.

13 Mode Press it to select PHOTO/VIDEO mode.

14 Menu / Delete Press it to enter camera setting mode.

Press it to delete the photos/videos in playback mode.

15 Tripod connector To fix the camera on tripod.

16 USB interface Via this connection, you can download photographs and video

clips to a computer.

17 Micro SD card slot Micro SD card storage location.

18 Battery door Door for battery.

3. Explanation of the status icons

Item Function Description

1 Mode selected

Photographs mode.

Videos capture mode.

Photo playback mode.

Video playback mode.

2 Flash indicator

Force flash: The flash is on in any environment.

Auto flash: The camera determines if

the flash should be used or not.

No flash : The flash is turned off.

3 Self-timer 10s Timer

4 ISO Sensitivity select.

5 Photo/Video

counter

Photo mode: No. of pictures had been taken.

Video mode: Recording time in second.

Playback mode: No. of pictures or video file.

6 Selected resolution

12M = 4032x3024; 9M=3456x2592

5M = 2560x1920; 3M = 2048x1536;

1.3M = 1280x960; VGA = 640x480

7 Picture quality

Super fine.

Fine.

Normal.

8 SD card indication The SD card is inserted and will be used as storage for

PHOTO and VIDEO

9 Brightness

alert-anti-shaking Alert user to hold the camera steadily.-on/off

10 Normal/Macro

mode indicator

Mode (0.5m – infinity).

Macro mode (11cm – 18cm).

11 Battery indicator The batteries are full.

The batteries are empty.

12 Exposure value Show EV value. ±

13 White Balance White balance selection.

14 Scene mode Landscape/Backlight/Night scene/Portrait/Sports/auto

15 Smile detection On/Off

16 Zoom indicator Showing zoom ratio.

4. Details for camera setting

capture Mode Single / 10s Timer Single or 10s timer selection

12M pixel resolution 4032 x 3024

9.0M pixel resolution 3456 x 2592

5.0M pixel resolution 2560 x 1920

3.0M pixel resolution 2048 x 1536

1.3M pixel resolution 1280 x 960

Resolution

VGA resolution 640 x 480

Quality Super Fine/Fine/Normal Picture quality setting

SET

Still

Sharpness Strong/Normal/Soft Sharpness setting

Exposure ±2,±5/3,±4/3,±1,

±2/3,±1/3,0

Exposure setting

Auto Automatic white balance

Daylight White balance selected for daylight

surrounding

Cloudy White balance selected for cloudy

surrounding

Tungsten White balance selected for tungsten

lighting

White balance

Fluorescent White balance selected for

fluorescent surrounding

Scene

Auto/Landscape/

Backlight/Night

scene/Portrait/Sports

Scene setting

ISO Auto/50/100/200 Sensitivity select

Smile detection On / Off Smile detection setting

Anti-shaking On / Off Anti-shaking setting

Video

Resolution VGA 640 x 480

QVGA 320 x 240 Video resolution set up

Date/Time YY/MM/DD Date or time setting

Auto power off Off / 1Minute / 3 Minutes Auto power off selection

Beep sound Off/On Beep sound setting

Language

English/T-Chinese/

S-Chinese/French/

Deutsch/Italian/Spanish/

Portuguese/Japanese/Ned

erlands

Select display language

Date stamp Date &Time /Date /Off Date stamp

Frequency 50Hz / 60Hz Select power frequency in your

location

Format Internal Memory/

SD card

Format the memory location

selection.

Default setting Cancel / OK Default setting

Setup

Version See the firmware version

Note: The camera will remain the last setting when it is turned off.

5. Using the camera

5.1 Installing the batteries

Open the battery door.

2. Insert 2xAAA alkaline batteries into the camera.

3. Close the battery door.

5.2 Inserting a memory card (not included)

This camera has built-in internal memory. This memory can be extended with a micro SD memory

card (not included).

Follow the instructions given below to insert the optional micro SD memory card into the camera.

1. Turn off the camera first.

2. Open the card bar.

3. Insert the micro SD card into the camera.

Note: There is only one right direction to insert the micro SD memory card into the slot. Do not

force the card into the slot, or else it may damage both the camera and the micro SD

memory card.

Note: The micro SD memory card must be formatted before taking photographs. See the

following sections for more information.

5.3 Formatting the memory or micro SD card

1. Press the menu button ( ) in PHOTO or VIDEO mode.

2. Select the setup mode by press the right button.

3. Select the format icon by press the

( ) button and press the SHUTTER button to

confirm.

4. Select Internal memory / SD card then press the SHUTTER button.

5.4 Setting the resolution

The camera can be set to different resolutions.

1. Press the menu button ( ) in PHOTO mode, select the resolutions icon by

( ) key

and press the SHUTTER to confirm.

Resolutions: VGA (640 x 480), 1.3M (1280 x 960), 3M (2048 x 1536),

5M (2560 x 1920), 9M (3456x2592), 12M (4032 x 3024)

2. Six different resolutions will be displayed. Select the desired resolution by using the up or

down buttons and press the SHUTTER button to confirm the selection.

5.5 Taking photographs

1. Turn on the camera.

Depending on the distance to the object being photographed, use macro switch to adjust

the distance. Select the flower symbol ( ) if you wish to take a close-up photograph

(11cm –18cm).

If you wish to take video or photograph of surroundings or people (0.5m – infinity),set the

macro switch to normal mode ( ).

3. If you are not sure if there is enough lighting, turn the automatic flash( ) on by pressing

the flash button. (If the battery power is too low, the flash won’t be activated).

4. Use the LCD screen to aim the object you wish to take photograph.

Use the face detection to aim the people you wish to take photograph.

5. Press SHUTTER button and wait until the LCD display turn on again.

6. If ‘SMILE’ detection is ON, shutter will be activate automatically once a smile face is

detected

Caution: 1) Taking picture for fast-moving object is not recommended.

2) Image may be distorted when taking picture in a moving vehicle.

5.6 Zoom in and out

The camera can zoom in up to 8 times.

Zoom in or out by pressing the up or down button, a number will appear on the display, 8.x is the

maximum zoom ratio.

5.7 Self-timer setting

You can use the self-timer function when you wish to take a photograph for yourself or when you

wish to take a photograph for an object which the camera must be as still as possible.

1. Set the camera to photo mode.

2. Press the MENU button ( ). The menu will appear.

3. Press the

( ) button to select Capture Mode and confirm by pressing the SHUTTER

button.

4. Press the

( ) button to set the delay time: 10S Timer.

5. Press the SHUTTER button to confirm. The self-timer function is now ready for use.

6. Aim at the object you wish to take photo.

7. Press the SHUTTER button to take a photograph.

The photo will be taken after the timer reaches the delay time that you pre-setted and the

camera will beep during the delay time.

5.8 Recording video clips

1. Press the MODE button to select the video clip mode( ).

2. For setting the resolution, Press MENU ( ) button and select Resolution, then press the

SHUTTER button to confirm. Two resolution will be displayed.

VGA (640 x 480) QVGA( 320 x 240).

3. Press the SHUTTER button to start recording video, press the SHUTTER button again to

stop recording. The video clip will now be saved as an AVI file in the camera memory.

5.9 Playback photographs

1. Press the( ) button to get into playback mode.

2. Press the left or right buttons to see photographs.

3. In full screen display , press the

( )

button to zoom in the photo.

4. To view images in thumbnail, press the

( ) button.

5. To shift the image in zoom-in mode, press the SHUTTER button then use the

up/down/left/right buttons.

6. Press the MENU ( ) button in Playback mode, press and hold MENU button again until

the menu options displayed. Select SLIDE SHOW and slide show time then press the

ENTER button to confirm. The pictures saved in your camera or your micro SD card will be

displayed in sequence automatically. To stop slide show, press ENTER button again.

5.10 Playback video clips

1. When video clips are displayed, press the SHUTTER button to start playing the video and

press the SHUTTER button again to pause the playback.

2. press right button to fast forward or press left button to rewind.

3. Press the down button to stop.

4. Press the mode button to exit.

5.11 Delete photographs and video clips

You can choose to delete a single photograph / video clip, or delete all the photographs / video

clips in the memory.

Follow the instructions given below to delete photograph.

1. Press the ( ) button to enter the playback mode.

2. Press left or right button to select photograph/video clip to be delete.

3. Press the MENU/delete button and select Delete This Image(Video) / All . （）

4. Press the SHUTTER button ,then select OK to confirm.

5. Press the mode button to exit.

NOTE: Select “All” and Press the SHUTTER button to confirm, all the pictures and videos will be

deleted.

6. Connecting to a PC

The unit can be connected to the computer as mass storage device and transfer photo/video files

for storage.

7. Specifications

Sensor 9.0 Mega pixel CMOS sensor

12.0 Mega pixels: (4032x3024)

9.0 Mega pixels: (3456 x 2592)

5.0 Mega pixels: (2560x1920)

3.0 Mega pixels: (2048x1536)

1.3 Mega pixels: (1280x960)

Image resolution

VGA: (640x480)

Lens F/2.8 f = 8.5mm

Focus range 0.5m. ~ Infinity

Macro mode 11cm – 18cm

Digital zoom 8x

Flash strobe Built-in ( Auto / force / off )

LCD display 2.7" TFT color display

White balance Auto / Daylight / Cloudy / Fluorescent / Tungsten

Video mode 20fps@VGA&30fps@QVGA with micro SD card

External memory card SD card supports up to 8GB

File format Picture: JPEG, Video: AVI

Self timer 10 seconds

PC interface USB 2.0

Power source 2xAAA alkaline batteries

8. System requirement

Operating system Windows XP / Vista or above

Mac 9.x or X.x

CPU Pentium III or above

RAM At least 64MB

Interface USB port

CD 4x speed CD ROM or above

9. Troubleshooting

Problem

Cause

Solution

Cannot turn on the camera

Low battery power.

Battery placed at wrong

polarities.

Replace or install the battery

correctly.

Photos can not be saved

when taking pictures.

The memory card or built-in

memory hasn’t been

formatted properly.

Format the memory in setup

mode of the camera. Please

refer to section 5.3.

Cannot find removable disk

after connecting the

camera to the computer

Connection failure. Make sure all cable connections

are secured and restart the

computer if necessary.

Flash does not work. Battery power is too low. Replace with new 2xAAA

alkaline batteries.

The batteries used up very

fast.

Incorrect or old, used up,

battery

Replace with new 2xAAA

alkaline batteries.

The photos are blurry 1. The camera is not held

steadily

2. The lens of camera is

dirty.

1. Hold the camera steadily until

it beeps when taking video

photo.

2. Clean the lens with soft dry

cloth.

For EU only

AM-TDC9J4-AGB-CLV-1

Produkt Specifikationer

Mærke:	Easypix
Kategori:	Kamera
Model:	V912

Har du brug for hjælp?

Hvis du har brug for hjælp til Easypix V912 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamera Easypix Manualer

Easypix V515 Duo Manual

2 Oktober 2024

Easypix Kiddypix Mystery Manual

23 September 2024

26 August 2024

13 August 2024

12 August 2024

9 August 2024

5 August 2024

Easypix Jelly Baby Manual

4 August 2024

Easypix V512 Manual

1 August 2024

Easypix AX-581 Manual

28 Juli 2024

Kamera Manualer

Nyeste Kamera Manualer

IMILAB C22 Manual

9 Juni 2025

Overmax Camspot 4.8 Manual

9 Juni 2025

Overmax Camspot 4.0 PTZ Manual

8 Juni 2025

Rollei HD-30 Manual

29 Marts 2025

Rollei Security Cam 1080p Manual

29 Marts 2025

Aida HD-NDI-X20 Manual

27 Marts 2025

Marshall Electronics CV228 Manual

12 Marts 2025

AViPAS AV-1180 Manual

12 Marts 2025

Fujifilm FinePix JX500 Manual

14 Januar 2025

Canon WFT-E9 Manual

13 Januar 2025