Electrolux ESS47300SX Manual
Electrolux
Opvaskemaskine
ESS47300SX
Læs gratis den danske manual til Electrolux ESS47300SX (56 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Electrolux ESS47300SX, eller vil du spørge andre brugere om produktet?
Side 1/56
ESS47300SX
EN Dishwasher User Manual 2
FR Lave-vaisselle Notice d'utilisation 26
CONTENTS
1. SAFETY INFORMATION....................................................................................3
2. SAFETY INSTRUCTIONS..................................................................................4
3. PRODUCT DESCRIPTION................................................................................ 6
4. CONTROL PANEL............................................................................................. 7
5. PROGRAMMES................................................................................................. 8
6. OPTIONS..........................................................................................................10
7. SETTINGS........................................................................................................10
8. BEFORE FIRST USE....................................................................................... 14
9. DAILY USE....................................................................................................... 15
10. HINTS AND TIPS........................................................................................... 17
11. CARE AND CLEANING..................................................................................18
12. TROUBLESHOOTING....................................................................................21
13. TECHNICAL INFORMATION......................................................................... 25
14. ENVIRONMENTAL CONCERNS................................................................... 25
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.electrolux.com/support
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
www.electrolux.com2
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damage that are the result
of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
•This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
•Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.
•Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
•Children should be supervised to ensure that they do
not play with the appliance.
•Keep detergents away from children.
•Keep children and pets away from the appliance when
the door is open.
•Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•This appliance is for cleaning household-type dishes
and tableware only.
•This appliance is designed for single household
domestic use in an indoor environment.
•This appliance may be used in, offices, hotel guest
rooms, bed & breakfast guest rooms, farm guest
ENGLISH 3
houses and other similar accommodation where such
use does not exceed (average) domestic usage levels.
•Do not change the specification of this appliance.
•The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 10 (1.0) bar
(MPa)
•Follow the maximum number of 13 place settings.
•If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
•WARNING: Knives and other utensils with sharp
points must be loaded in the basket with their points
down or placed in a horizontal position.
•Do not leave the appliance with the open door
unattended to avoid stepping accidentally onto it.
•Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
•Do not use high pressure water sprays and/or steam
to clean the appliance.
•If the appliance has ventilation openings in the base,
they must not be covered e.g. by a carpet.
•The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• Install the appliance in a safe and
suitable place that meets installation
requirements.
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
• Warning: this appliance is designed to
be installed / connected to a
grounding connection in the building.
www.electrolux.com4
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need to
be replaced, this must be carried out
by our Authorised Service Centre.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• This appliance is fitted with a 13 A
mains plug. If it is necessary to
change the mains plug fuse, use only
a 13 A ASTA (BS 1362) fuse (UK and
Ireland only).
2.3 Water connection
• Do not cause damage to the water
hoses.
• Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.
• Ensure that there are no visible water
leaks during and after the first use of
the appliance.
• If the water inlet hose is damaged,
immediately close the water tap and
disconnect the mains plug from the
mains socket. Contact the Authorised
Service Centre to replace the water
inlet hose.
• Without electrical power, the water
protection system is not active. In this
case there is a risk of flooding.
• The water inlet hose has a safety
valve and a sheath with an inner
mains cable.
WARNING!
Dangerous voltage.
2.4 Use
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
• Dishwasher detergents are
dangerous. Follow the safety
instructions on the detergent
packaging.
• Do not drink and play with the water in
the appliance.
• Do not remove the dishes from the
appliance until the programme is
complete. Some detergent may
remain on the dishes.
• Do not store items or apply pressure
on the open door of the appliance.
• The appliance can release hot steam
if you open the door while a
programme operates.
2.5 Service
• To repair the appliance contact the
Authorised Service Centre. Use
original spare parts only.
• Please note that self-repair or non-
professional repair can have safety
consequences and might void the
guarantee.
• The following spare parts will be
available for 7 years after the model
has been discontinued: motor,
circulation and drain pump, heaters
and heating elements, including heat
pumps, piping and related equipment
including hoses, valves, filters and
aquastops, structural and interior
parts related to door assemblies,
printed circuit boards, electronic
displays, pressure switches,
thermostats and sensors, software
ENGLISH 5
and firmware including reset software.
Please note that some of these spare
parts are only available to
professional repairers, and that not all
spare parts are relevant for all
models.
• The following spare parts will be
available for 10 years after the model
has been discontinued: door hinge
and seals, other seals, spray arms,
drain filters, interior racks and plastic
peripherals such as baskets and lids.
• Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended
to withstand extreme physical
conditions in household appliances,
such as temperature, vibration,
humidity, or are intended to signal
information about the operational
status of the appliance. They are not
intended to be used in other
applications and are not suitable for
household room illumination.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
3. PRODUCT DESCRIPTION
5 4810 9 11 67
12
2 31
1Worktop
2Upper spray arm
3Lower spray arm
4Filters
5Rating plate
6Salt container
7Air vent
8Rinse aid dispenser
9Detergent dispenser
10 Cutlery basket
11 Lower basket
12 Upper basket
The graphic is a general
overview. For more details,
refer to other chapters or
documents provided with the
appliance.
www.electrolux.com6
4. CONTROL PANEL
1
2 4 5
68
3
7
1On/off button
2Program button
3Programme indicators
4Display
5Delay button
6Option button
7Indicators
8Start button
4.1 Indicators
Indicator Description
Salt indicator. It is on when the salt container needs refilling. It is al‐
ways off while the programme operates.
Rinse aid indicator. It is on when the rinse aid dispenser needs refill‐
ing. It is always off while the programme operates.
Washing phase indicator. It is on when the washing phase operates.
Rinsing phase indicator. It is on when the rinsing phase operates.
Drying phase indicator. It is on when you select a programme with the
drying phase. It flashes when the drying phase operates.
Delay indicator. It is on when you set the delay start.
GlassCare indicator.
ExtraPower indicator.
ExtraHygiene indicator.
ENGLISH 7
5. PROGRAMMES
The order of the programmes in the table may not reflect their sequence on the control
panel.
Programme Dishwasher
load
Degree of
soil
Programme phases Options
1) Crockery,
cutlery,
pots, pans
Normal,
lightly
dried-on
• Prewash
• Dishwashing 50 °C
• Intermediate rinse
• Final rinse 55 °C
• Drying
• AirDry 2)
• ExtraPower
• GlassCare
• ExtraHygiene
Crockery,
cutlery,
pots, pans
Normal to
heavy,
dried-on
• Prewash
• Dishwashing 60 °C
• Intermediate rinse
• Final rinse 60 °C
• Drying
• AirDry 2)
• ExtraPower
• GlassCare
• ExtraHygiene
Crockery,
cutlery,
pots, pans
Normal,
lightly
dried-on
• Dishwashing 60 °C
• Intermediate rinse
• Final rinse 55 °C
• Drying
• AirDry 2)
• ExtraPower
• GlassCare
• ExtraHygiene
Crockery,
cutlery
Fresh,
lightly
dried-on
• Dishwashing 60 °C
• Intermediate rinse
• Final rinse 50 °C
• AirDry 2)
• ExtraPower
• GlassCare
• ExtraHygiene
Crockery,
cutlery
Fresh • Dishwashing 50 °C
• Intermediate rinse
• Final rinse 50 °C
• AirDry 2)
• ExtraPower
• GlassCare
• ExtraHygiene
3) Crockery,
cutlery,
pots, pans
All • Prewash
• Dishwashing 50 - 60
°C
• Intermediate rinse
• Final rinse 60 °C
• Drying
• AirDry 2)
4) None Cleaning
the appli‐
ance interi‐
or
• Cleaning 70 °C
• Intermediate rinse
• Final rinse
• AirDry 2)
www.electrolux.com8
Programme Dishwasher
load
Degree of
soil
Programme phases Options
5) All All • Prewash
1) This programme offers the most efficient use of water and energy consumption for crock‐
ery and cutlery with normal soil. This is the standard programme for test institutes. This pro‐
gramme is used to assess compliance with the Ecodesign Comission Regulation (EU)
2019/2022.
2) Automatic door opening during the drying phase. Refer to "Settings".
3) The appliance senses the degree of soil and the quantity of items in the baskets. It auto‐
matically adjusts the temperature and the quantity of water, the energy consumption and the
programme duration.
4) This programme is designed to clean the inside of the appliance effectively and efficient‐
ly. It removes limescale and grease buildup. The programme should be run at least once
every 2 months with a descaler or a cleaning product designed for dishwashers and without
any load.
5) With this programme, you can quickly rinse off food remains from dishes and prevent
odours forming in the appliance. Do not use detergent with this programme.
5.1 Consumption values
Programme 1)2) Water (l) Energy (kWh) Duration (min)
9.9 0.835 240
10.2 0.980 160
10.1 1.030 90
10.4 0.860 60
10.4 0.630 30
10.2 0.980 170
9.3 0.650 60
4.5 0.010 15
1) The pressure and the temperature of the water, the variations of the mains supply, the
options, the quantity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
5.2 Information for test institutes
To receive the necessary information for conducting performance tests (e.g. according
to: EN60436 ), send an email to:
info.test@dishwasher-production.com
In your request, include the product number code (PNC) from the rating plate.
For any other questions regarding your dishwasher, refer to the service book provided
with your appliance.
ENGLISH 9
6. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
The option button toggles
between the available
options and their possible
combinations.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
If an option is not applicable
to a programme, the related
indicator is off or it flashes
quickly for a few seconds
and then goes out.
Activating options can affect
the water and energy
consumption as well as the
programme duration.
6.1 GlassCare
This option protects a delicate load,
glassware in particular, from damaging. It
prevents rapid changes in the
dishwashing temperature of the selected
programme and reduces it to 45 °C.
How to activate GlassCare
Press until the indicator is on.
The display shows the updated
programme duration.
6.2 ExtraPower
This option improves the dishwashing
results of the selected programme. It
increases the wash temperature and
duration.
How to activate ExtraPower
Press until the indicator is on.
The display shows the updated
programme duration.
6.3 ExtraHygiene
This option provides better cleaning
results by keeping the temperature
between 65 and 70 °C for at least 10
minutes during the last rinsing phase.
How to activate ExtraHygiene
Press until the indicator is on.
The display shows the updated
programme duration.
7. SETTINGS
7.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode, you can set a
programme and enter user mode.
You can also view the number of
completed dishwashing cycles.
Settings available in the user mode:
• The level of water softener according
to the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• Activation or deactivation of the
AirDry.
• Factory reset.
The saved settings remain valid until
you change them again.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
www.electrolux.com10
is on and the display shows the
programme duration.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously and
until the appliance is in programme
selection mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
To enter user mode, press and hold
simultaneously and until the
indicators , and
flash and the display is blank.
7.2 The water softener
The water softener removes minerals
from the water supply, which would have
a negative effect on the washing results
and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. Set the right level of the
water softener to assure good washing
results.
Water hardness
German de‐
grees (°dH)
French de‐
grees (°fH)
mmol/l mg/l (ppm) Clarke
degrees
Water soften‐
er level
47 - 50 84 - 90 8.4 - 9.0 835 - 904 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 755 - 834 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 645 - 754 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 505 - 644 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 395 - 504 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 325 - 394 23 - 27 5 1)
15 - 18 26 - 32 2.6 - 3.2 255 - 324 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 185 - 254 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 70 - 184 5 - 12 2
<4 <7 <0.7 <70 < 5 1 2)
1) Factory setting.
2) Do not use salt at this level.
Regardless of the type of detergent
used, set the proper water hardness
level to keep the salt refill indicator
active.
Multi-tabs containing salt are
not effective enough to
soften hard water.
Regeneration process
For the correct water softener operation,
the resin of the softener device needs to
be regenerated regularly. This process is
automatic and is the part of the normal
dishwasher operation.
When the prescribed quantity of water
(see values in the table) has been used
ENGLISH 11
since the previous regeneration process,
a new regeneration process will be
initiated between the final rinse and the
programme end.
Water softener
level
Amount of water
(l)
1 250
2 100
3 62
4 47
5 25
6 17
7 10
8 5
9 3
10 3
In case of the high water softener setting,
it may occur also in the middle of the
programme, before the rinse (twice
during a programme). Regeneration
initiation has no impact on the cycle
duration, unless it occurs in the middle of
a programme or at the end of a
programme with a short drying phase. In
such cases, the regeneration prolongs
the total duration of a programme by
additional 5 minutes.
Subsequently, the rinsing of the water
softener that lasts 5 minutes may begin
in the same cycle or at the beginning of
the next programme. This activity
increases the total water consumption of
a programme by additional 4 litres and
the total energy consumption of a
programme by additional 2 Wh. The
rinsing of the softener ends with a
complete drain.
Each performed softener rinse (possible
more than one in the same cycle) may
prolong the programme duration by
another 5 minutes when it occurs at any
point at the beginning or in the middle of
a programme.
All the consumption values
mentioned in this section are
determined in line with the
currently applicable standard
in laboratory conditions with
water hardness 2.5mmol/L
(water softener: level 3)
according to the regulation:
2019/2022 .
The pressure and the
temperature of water as well
as the variations of the
mains supply can change
the values.
How to set the water softener
level
Make sure the appliance is in user mode.
1. Press .
• The indicator still flashes.
• The remaining indicators are off.
• The display shows the current
setting: e.g. = level 5.
2. Press repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
7.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the final
rinse.
When the rinse aid chamber is empty,
the rinse aid indicator turns on. If the
drying results are satisfactory while using
multi-tablets only, you can deactivate the
notification for refilling the rinse aid.
However, for best drying performance,
always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
www.electrolux.com12
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
1. Press .
• The indicator still
flashes.
• The remaining indicators are off.
• The display shows the current
setting.
– = the rinse aid empty
notification is deactivated.
– = the rinse aid empty
notification is activated.
2. Press to change the setting.
3. Press the on/off button to confirm the
setting.
7.4 AirDry
AirDry improves the drying results with
less energy consumption. The appliance
door opens automatically during the
drying phase and remains ajar.
AirDry is automatically activated with all
programmes other than (if
applicable).
The duration of the drying phase and the
door opening time vary depending on the
selected programme and options.
When AirDry opens the door, the display
shows the remaining time of the running
programme.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for at least 3 minutes,
the running programme
ends.
CAUTION!
If children have access to
the appliance, we advise to
deactivate AirDry. The
automatic opening of the
door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press .
• The indicator still flashes.
• The remaining indicators are off.
• The display shows the current
setting:
– = AirDry is deactivated.
– = AirDry is activated.
2. Press to change the setting.
3. Press the on/off button to confirm the
setting.
7.5 Factory reset
Factory reset restores the factory
defaults. Before the reset, make sure the
appliance is in user mode.
Press and hold and for 5 seconds.
The displays shows for about 5_ _ _
seconds.
The appliance returns to programme
selection mode.
Factory reset does not reset
the cycle counter.
7.6 Cycle counter
You can view the number of completed
dishwashing cycles in the cycle counter.
1. Press the on/off button to activate the
dishwasher. Make sure that the
ENGLISH 13
appliance is in programme selection
mode.
2. Press and hold and for 5
seconds.
The displays shows and then theuC
number of cycles.
Press any button to exit the cycle
counter.
After reaching 65535, the
cycle counter restarts.
8. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in
the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
8.1 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (only for the first time).
3. Fill the salt container with 1 kg of salt
(until it is full).
4. Carefully shake the funnel by its
handle to get the last granules inside.
5. Remove the salt around the opening
of the salt container.
6. Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out
of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.
www.electrolux.com14
8.2 How to fill the rinse aid
dispenser
M
A
X
1
2
3
4
+
-
A B
D
C
CAUTION!
The compartment ( ) is forA
rinse aid only. Do not fill it
with detergent.
CAUTION!
Only use rinse aid designed
specifically for dishwashers.
1. DPress the release button ( ) to open
the lid ( ).C
2. AFill the dispenser ( ) until the rinse
aid reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent excessive
foam formation.
4. Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity ( )B
between position 1 (lowest
quantity) and position 4 or 6
(highest quantity).
9. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the
salt container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start a programme suitable
for the type of load and the degree of
soil.
9.1 Using the detergent
20
30
A B
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1. BPress the release button ( ) to open
the lid ( ).C
2. Put the detergent, in powder or
tablets, in the compartment ( ).A
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the
release button locks into position.
For information about the
detergent dosage, refer to
the manufacturer's
instructions on the
packaging of the product.
Usually, 20 - 25 ml of gel
detergent is adequate for
washing a load with normal
soil.
Do not fill the compartment
( ) with more than 30 ml ofA
gel detergent.
ENGLISH 15
9.2 Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• When the programme is complete.
• After 5 minutes if a programme was
not started.
Starting a programme
1. Press the on/off button to activate the
appliance. Make sure that the
appliance is in programme selection
mode.
2. Close the appliance door.
3. Press repeatedly until the indicator
of the desired programme is on.
The display shows the programme
duration.
4. Set applicable options if desired.
5. Press to start the programme.
• The indicator of the running phase
is on.
• The programme duration counts
down in minutes.
Starting a programme with
delay start
1. Set a programme.
2. Press repeatedly until the display
shows the desired delay time (from 1
to 24 hours).
3. Press to begin the countdown.
• The indicator is on.
• The remaining time counts down
in hours. The final hour is
displayed in minutes.
When the countdown is complete, the
programme starts and the indicator of the
running phase is on. The indicator is
off.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme ends. It
does not happen if the door
is opened by AirDry function.
Do not try to close the
appliance door within 2
minutes after AirDry
automatically opens it as this
may cause damage to the
appliance.
If, afterwards, the door is
closed for at least 3 minutes,
the running programme
ends.
Cancelling the delay start while
the countdown operates
When you cancel the delay start, you
have to set a programme and options
again.
Press and hold simultaneously and
until the appliance is in programme
selection mode.
Cancelling the programme
Press and hold simultaneously and
until the appliance is in programme
selection mode.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
www.electrolux.com16
End of the programme
When the programme is complete, the
Auto Off function switches the appliance
off automatically.
All buttons are inactive except for the
on/off button.
Close the water tap.
10. HINTS AND TIPS
10.1 General
Follow the hints below to ensure optimal
cleaning and drying results in daily use
and to protect the environment.
• Washing dishes in the dishwasher as
instructed in the user manual usually
consumes less water and energy than
washing dishes by hand.
• Load the dishwasher to its full
capacity to save water and energy.
For best cleaning results, arrange
items in the baskets as instructed in
the user manual and do not overload
the baskets.
• Do not pre-rinse dishes by hand. It
increases the water and energy
consumption. When needed, select a
programme with a prewash phase.
• Remove larger residues of food from
the dishes and empty cups and
glasses before putting them inside the
appliance.
• Soak or slightly scour cookware with
firmly cooked-on or baked-on food
before washing it in the appliance.
• Make sure that items in the baskets
do not touch or cover each other.
Only then can the water completely
reach and wash the dishes.
• You can use dishwasher detergent,
rinse aid and salt separately or you
can use the multi-tablets (e.g. ''All in
1''). Follow the instructions on the
packaging.
• Select a programme according to the
type of load and the degree of soil.
offers the most efficient use of
water and energy consumption.
• To prevent limescale buildup inside
the appliance:
– Refill the salt container whenever
necessary.
– Use the recommended dosage of
the detergent and rinse aid.
– Make sure that the current level of
the water softener agrees with the
hardness of the water supply.
– Follow the instructions in the
chapter ."Care and cleaning"
10.2 Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent
designed for dishwasher. Other
products can cause damage to the
appliance.
• In areas with hard and very hard
water, we recommend to use basic
dishwasher detergent (powder, gel,
tablets containing no additional
agents), rinse aid and salt separately
for optimal cleaning and drying
results.
• Detergent tablets do not fully dissolve
with short programmes. To prevent
detergent residues on the tableware,
we recommend that you use tablets
with long programmes.
• Always use the correct quantity of
detergent. Insufficient dosage of
detergent can result in poor cleaning
results and hard-water filming or
spotting on the items. Using too much
detergent with soft or softened water
results in detergent residues on the
dishes. Adjust the amount of
detergent based on the water
hardness. Refer to the instructions on
the detergent packaging.
• Always use the correct quantity of
rinse aid. Insufficient dosage of rinse
aid decreases the drying results.
Using too much rinse aid results in
bluish layers on the items.
• Make sure that the water softener
level is correct. If the level is too high,
the increased quantity of salt in the
water might result in rust on cutlery.
ENGLISH 17
10.3 What to do if you want to
stop using multi-tablets
Before you start to use separately
detergent, salt and rinse aid, complete
the following steps:
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a
rinsing phase. Do not add detergent
and do put dishes in the baskets.
4. When the programme is complete,
adjust the water softener according
to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.
6. Activate the rinse aid empty
notification.
10.4 Loading the baskets
• Always use the whole space of the
baskets.
• Use the appliance to wash
dishwasher-safe items only.
• Do not wash in the appliance items
made of wood, horn, aluminium,
pewter and copper as they could
crack, warp, get discoloured or pitted.
• Do not wash in the appliance items
that can absorb water (sponges,
household cloths).
• Put hollow items (cups, glasses and
pans) with the opening facing
downwards.
• Make sure that glass items do not
touch each other.
• Put light items in the upper basket.
Make sure that the items do not move
freely.
• Put cutlery and small items in the
cutlery basket.
• Move the upper basket upwards to
accommodate large items in the lower
basket.
• Make sure that the spray arms can
move freely before you start a
programme.
10.5 Before starting a
programme
Before you start the selected
programme, make sure that:
• The filters are clean and correctly
installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid
(unless you use multi-tablets).
• The arrangement of the items in the
baskets is correct.
• The programme is suitable to the type
of load and the degree of soil.
• The correct quantity of detergent is
used.
10.6 Unloading the baskets
1. Let the tableware cool down before
you remove it from the appliance. Hot
items can be easily damaged.
2. First remove items from the lower
basket, then from the upper basket.
After the programme is
completed, water can still
remain on the inside
surfaces of the appliance.
11. CARE AND CLEANING
WARNING!
Before maintenance,
deactivate the appliance and
disconnect the mains plug
from the main socket.
Dirty filters and clogged
spray arms decrease the
washing results. Make a
check regularly and, if
necessary, clean them.
11.1 Internal cleaning
• Clean the appliance interior with a soft
damp cloth.
www.electrolux.com18
• Do not use abrasive products,
abrasive cleaning pads, sharp tools,
strong chemicals, scourer or solvents.
• Wipe clean the door, including the
rubber gasket, once a week.
• To maintain the performance of your
appliance, use a cleaning product
designed for dishwashers at least
once every two months. Carefully
follow the instructions on the
packaging of the product.
• Use the automatic cleaning
programme for optimal cleaning
results.
• Using short-duration programmes
regularly can cause grease and
limescale buildup inside the
appliance. Run long-duration
programmes at least twice a month to
prevent the buildup.
11.2 Removal of foreign objects
Check the filters and the sump after each
use of the dishwasher. Foreign objects
(e.g. pieces of glass, plastic, bones or
toothpicks, etc) decrease the cleaning
performance and can cause damage to
the drain pump.
CAUTION!
If unable to remove the
foreign objects, contact an
Authorised Service Centre.
1. Disassemble the filters system as
instructed in this chapter.
2. Remove any foreign objects
manually.
3. Reassemble the filters as instructed
in this chapter.
11.3 External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products,
abrasive cleaning pads or solvents.
11.4 Cleaning the filters
The filter system is made of 3 parts.
C
B
A
1. BTurn the filter ( ) counterclockwise
and remove it.
2. C BRemove the filter ( ) out of filter ( ).
3. ARemove the flat filter ( ).
4. Wash the filters.
ENGLISH 19
5. Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. APut back in place the flat filter ( ).
Make sure that it is correctly
positioned under the 2 guides.
7. B CReassemble the filters ( ) and ( ).
8. BPut back the filter ( ) in the flat filter
( ). Turn it clockwise until it locks.A
CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage
to the appliance.
11.5 Cleaning the lower spray
arm
We recommend to clean the lower spray
arm regularly to prevent soil from
clogging the holes.
Clogged holes can cause unsatisfactory
washing results.
1. To remove the lower spray arm, pull
it upwards.
2. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes.
3. To install the spray arm back, press it
downwards.
www.electrolux.com20
11.6 Cleaning the upper spray
arm
Do not remove the upper spray arm. If
the openings in the spray arm are
clogged, remove the remaining particles
of soil with a thin pointed object, e.g. a
toothpick.
12. TROUBLESHOOTING
WARNING!
Improper repair of the
appliance may pose a
danger to the safety of the
user. Any repairs must be
performed by qualified
personnel.
The majority of problems that may
occur can be solved without the need
to contact an Authorised Service
Centre.
Refer to the below table for information
on possible problems.
With some problems, the display shows
an alarm code.
Problem and alarm code Possible cause and solution
You cannot activate the
appliance.
• Make sure that the mains plug is connected to the
mains socket.
• Make sure that there is no damaged fuse in the fuse
box.
The programme does not
start.
• Make sure that the appliance door is closed.
• Press the start button.
• If the delay start is set, cancel the setting or wait for
the end of the countdown.
• The appliance recharges the resin inside the water
softener. The duration of the procedure is approxi‐
mately 5 minutes.
The appliance does not fill
with water.
The display shows or i10
i11.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is
not too low. For this information, contact your local
water authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clog‐
ged.
• Make sure that the inlet hose has no kinks or bends.
The appliance does not
drain the water.
The display shows .i20
• Make sure that the sink spigot is not clogged.
• Make sure that the interior filter system is not clog‐
ged.
• Make sure that the drain hose has no kinks or bends.
The anti-flood device is on.
The display shows .i30
• Close the water tap.
• Make sure that the appliance is correctly installed.
• Make sure the baskets are loaded as instructed in
the user manual.
ENGLISH 21
Problem and alarm code Possible cause and solution
Malfunction of the water
level detection sensor.
The display shows - i41
i44.
• Make sure that the filters are clean.
• Switch the appliance off and on.
Malfunction of the wash
pump or the drain pump.
The display shows - i51
i59 i5A i5F or - .
• Switch the appliance off and on.
The temperature of the wa‐
ter inside the appliance is
too high or malfunction of
the temperature sensor oc‐
curred.
The display shows or i61
i69.
• Make sure that the temperature of the inlet water
does not exceed 60°C.
• Switch the appliance off and on.
Technical malfunction of
the appliance.
The display shows or iC0
iC3.
• Switch the appliance off and on.
The level of water inside
the appliance is too high.
The display shows .iF1
• Switch the appliance off and on.
• Make sure that the filters are clean.
• Make sure that the outlet hose is installed at the right
height above the floor. Refer to the installation in‐
structions.
The appliance stops and
starts more times during
operation.
• It is normal. It provides optimal cleaning results and
energy savings.
The programme lasts too
long.
• If the delayed start is set, cancel the delay setting or
wait for the end of the countdown.
The displayed programme
duration is different than
the duration in the con‐
sumption values table.
• The pressure and the temperature of the water, the
variations of the mains supply, the options, the quan‐
tity of dishes and the degree of soil can change the
programme duration.
The remaining time in the
display increases and
skips nearly to the end of
programme time.
• This is not a defect. The appliance is working cor‐
rectly.
Small leak from the appli‐
ance door.
• The appliance is not levelled. Loosen or tighten the
adjustable feet (if applicable).
• The appliance door is not centred on the tub. Adjust
the rear foot (if applicable).
The appliance door is diffi‐
cult to close.
• The appliance is not levelled. Loosen or tighten the
adjustable feet (if applicable).
• Parts of the tableware are protruding from the bas‐
kets.
www.electrolux.com22
Problem and alarm code Possible cause and solution
The appliance door opens
during the wash cycle.
• The AirDry function is activated. You can deactivate
the function. Refer to ."Settings"
Rattling/knocking sounds
from inside the appliance.
• The tableware is not properly arranged in the bas‐
kets. Refer to basket loading leaflet.
• Make sure that the spray arms can rotate freely.
The appliance trips the cir‐
cuit-beaker.
• The amperage is insufficient to supply simultaneous‐
ly all the appliances in use. Check the socket amper‐
age and the capacity of the meter or turn off one of
the appliances in use.
• Internal electrical fault of the appliance. Contact an
Authorised Service Centre.
Refer to , "Before first use"
"Daily use" "Hints and, or
tips" for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
WARNING!
We do not recommend using
the appliance until the
problem has been
completely fixed. Unplug the
appliance and do not plug it
in again until you are certain
that it operates correctly.
12.1 The dishwashing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results. • Refer to , and the"Daily use" "Hints and tips"
basket loading leaflet.
• Use more intensive washing programme.
• Activate the ExtraPower option to improve the
washing results of a selected programme.
• Clean spray arm jets and filter. Refer to "Care and
Cleaning".
Poor drying results. • Tableware was left for too long inside the closed
appliance. Activate the function AirDry to set the
automatic opening of the door and to improve the
drying performance.
• There is no rinse aid or the dosage of rinse aid is
not sufficient. Fill the rinse aid dispenser or set the
dosage of rinse aid to a higher level.
• The quality of the rinse aid can be the cause.
• Always use rinse aid, even with multi-tablets.
• Plastic items may need to be towel dried.
• The programme does not have the drying phase.
Refer to ."Programmes overview"
ENGLISH 23
Problem Possible cause and solution
There are whitish streaks or
bluish layers on glasses and
dishes.
• The released quantity of rinse aid is too high. Ad‐
just the rinse aid dosage to a lower level.
• The quantity of detergent is too high.
There are stains and dry wa‐
ter drops on glasses and
dishes.
• The released quantity of rinse aid is not sufficient.
Adjust the rinse aid dosage to a higher level.
• The quality of the rinse aid can be the cause.
The interior of the appliance
is wet.
• This is not a defect of the appliance. Humidity con‐
densates on the appliance walls.
Unusual foam during wash‐
ing.
• Use the detergent designed specifically for dish‐
washers.
• Use a detergent from a different manufacturer.
• Do not pre-rinse dishes under running water.
Traces of rust on cutlery. • There is too much salt in the water used for wash‐
ing. Refer to ."The water softener"
• Silver and stainless steel cutlery were placed to‐
gether. Do not place silver and stainless steel items
close together.
There are residues of deter‐
gent in the dispenser at the
end of the programme.
• The detergent tablet was stuck in the dispenser
and was not washed away by water.
• Water cannot wash away the detergent from the
dispenser. Make sure that the spray arms are not
blocked or clogged.
• Make sure that items in the baskets do not impede
the lid of the detergent dispenser from opening.
Odours inside the appliance. • Refer to ."Internal cleaning"
• Start the programme with a descaler or a clean‐
ing product designed for dishwashers.
Limescale deposits on the
tableware, on the tub and on
the inside of the door.
• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to "The water soft‐
ener".
• Use salt and set regeneration of the water softener
even when multi-functional tablets are used. Refer
to ."The water softener"
• Start the programme with a descaler designed
for dishwashers.
• If limescale deposits persist, clean the appliance
with the suitable detergents.
• Try a different detergent.
• Contact the detergent manufacturer.
Dull, discoloured or chipped
tableware.
• Make sure that only dishwasher-safe items are
washed in the appliance.
• Load and unload the basket carefully. Refer to the
basket loading leaflet.
• Place delicate items in the upper basket.
• Activate the GlassCare option to ensure special
care for glassware and delicate items.
www.electrolux.com24
Refer to , "Before first use"
"Daily use" "Hints and, or
tips" for other possible
causes.
13. TECHNICAL INFORMATION
Dimensions Width / height / depth (mm) 598 / 850 / 622
Electrical connection 1) Voltage (V) 220 - 240
Frequency (Hz) 50
Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 10 (1.0)
Water supply Cold water or hot water 2) min. 5 - max. 60 °C
Capacity Place settings 13
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot
water supply to decrease energy consumption.
13.1 Link to the EU EPREL
database
The QR code on the energy label
supplied with the appliance provides a
web link to the registration of this
appliance in the EU EPREL database.
Keep the energy label for reference
together with the user manual and all
other documents provided with this
appliance.
It is possible to find information related to
the performance of the product in the EU
EPREL database using the link https://
eprel.ec.europa.eu and the model name
and product number that you can find on
the rating plate of the appliance. Refer to
the chapter "Product description".
For more detailed information about the
energy label, visit
www.theenergylabel.eu.
14. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ENGLISH 25
TABLE DES MATIÈRES
1. INFORMATIONS DE SÉCURITÉ..................................................................... 27
2. CONSIGNES DE SÉCURITÉ........................................................................... 28
3. DESCRIPTION DE L’APPAREIL......................................................................31
4. BANDEAU DE COMMANDE............................................................................32
5. PROGRAMMES............................................................................................... 33
6. OPTIONS..........................................................................................................35
7. RÉGLAGES...................................................................................................... 36
8. AVANT LA PREMIÈRE UTILISATION............................................................. 40
9. UTILISATION QUOTIDIENNE..........................................................................41
10. CONSEILS......................................................................................................43
11. ENTRETIEN ET NETTOYAGE.......................................................................45
12. DÉPANNAGE................................................................................................. 47
13. CARACTÉRISTIQUES TECHNIQUES...........................................................52
14. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT..........................53
NOUS PENSONS À VOUS
Merci d’avoir choisi un appareil Electrolux. Vous avez choisi un produit qui
bénéficie de décennies d'expérience professionnelle et d'innovation. Ingénieux et
élégant, il a été pensé pour vous. C'est la raison pour laquelle vous pouvez avoir
la certitude d'obtenir d'excellents résultats à chaque utilisation.
Bienvenue chez Electrolux
Consultez notre site pour :
Obtenir des conseils d’utilisation, des brochures, un dépanneur, des
informations sur le service et les réparations :
www.electrolux.com/support
Enregistrer votre produit pour un meilleur service :
www.registerelectrolux.com
Acheter des accessoires, consommables et pièces de rechange d’origine pour
votre appareil :
www.electrolux.com/shop
SERVICE ET ASSISTANCE À LA CLIENTÈLE
N’utilisez que des pièces de rechange d’origine.
Avant de contacter notre centre de service agréé, assurez-vous de disposer des
informations suivantes : Modèle, PNC, numéro de série.
Ces informations figurent sur la plaque signalétique.
Avertissement/Consignes de sécurité
Informations générales et conseils
Informations environnementales
Sous réserve de modifications.
www.electrolux.com26
1. INFORMATIONS DE SÉCURITÉ
Avant d'installer et d'utiliser cet appareil, lisez
soigneusement les instructions fournies. Le fabricant ne
pourra être tenu pour responsable des blessures et
dégâts résultant d'une mauvaise installation ou
utilisation. Conservez toujours les instructions dans un
lieu sûr et accessible pour vous y référer ultérieurement.
1.1 Sécurité des enfants et des personnes
vulnérables
•Cet appareil peut être utilisé par des enfants âgés
d'au moins 8 ans et par des personnes ayant des
capacités physiques, sensorielles ou mentales
réduites ou dénuées d’expérience ou de
connaissance, s'ils sont correctement surveillés ou si
des instructions relatives à l'utilisation de l'appareil en
toute sécurité leur ont été données et s’ils
comprennent les risques encourus.
•Les enfants entre 3 et 8 ans et les personnes ayant un
handicap très important et complexe doivent être
tenus à l'écart de l'appareil, à moins d'être surveillés
en permanence.
•Les enfants de moins de 3 ans doivent être tenus à
l'écart de l'appareil, à moins d'être surveillés en
permanence.
•Veillez à ce que les enfants ne jouent pas avec
l’appareil.
•Ne laissez pas les détergents à la portée des enfants.
•Tenez les enfants et les animaux éloignés de
l’appareil lorsque la porte est ouverte.
•Le nettoyage et l'entretien par l'usager ne doivent pas
être effectués par des enfants sans surveillance.
1.2 Sécurité générale
•Cet appareil est destiné au nettoyage de la vaisselle
de table et de la vaisselle de type ménager
uniquement.
FRANÇAIS 27
•Cet appareil est conçu pour un usage domestique
unique, dans un environnement intérieur.
•Cet appareil peut être utilisé dans les bureaux, les
chambres d’hôtel, les chambres d’hôtes, les maisons
d’hôtes de ferme et d’autres hébergements similaires
lorsque cette utilisation ne dépasse pas le niveau
(moyen) de l’utilisation domestique.
•Ne modifiez pas les caractéristiques de cet appareil.
•La pression de l’eau en fonctionnement (minimale et
maximale) doit se situer entre 0.5 (0.05) / 10 (1.0) bar
(MPa)
•Respectez le nombre maximal de 13 couverts.
•Si le câble d’alimentation est endommagé, il doit être
remplacé par le fabricant, son service après-vente ou
par un professionnel qualifié afin d’éviter un danger.
•AVERTISSEMENT : Les couteaux et autres ustensiles
tranchants doivent être placés dans le panier, pointe
vers le bas, ou en position horizontale.
•Ne laissez pas la porte de l’appareil ouverte sans
surveillance pour éviter de vous prendre
accidentellement les pieds dedans.
•Avant toute opération d'entretien, mettez l'appareil à
l'arrêt et débranchez-le de l’alimentation électrique.
•Ne pulvérisez pas d'eau ni de vapeur à haute pression
pour nettoyer l'appareil.
•Si l’appareil dispose d’orifices d’aération à la base,
veillez à ne pas les couvrir, p. ex. avec de la
moquette.
•L’appareil doit être raccordé au réseau d’eau à l’aide
des tuyaux neufs fournis. Les anciens ensembles de
tuyaux ne doivent pas être réutilisés.
2. CONSIGNES DE SÉCURITÉ
2.1 Installation
AVERTISSEMENT!
L'appareil doit être installé
uniquement par un
professionnel qualifié.
• Retirez l'intégralité de l'emballage.
• N'installez pas et ne branchez pas un
appareil endommagé.
• Suivez scrupuleusement les
instructions d'installation fournies
avec l'appareil.
www.electrolux.com28
• Soyez toujours vigilants lorsque vous
déplacez l'appareil car il est lourd.
Utilisez toujours des gants de sécurité
et des chaussures fermées.
• N'installez pas l'appareil ou ne
l'utilisez pas dans un endroit où la
température ambiante est inférieure à
0 °C.
• Installez l'appareil dans un lieu sûr et
adapté répondant aux exigences
d'installation.
2.2 Branchement électrique
AVERTISSEMENT!
Risque d'incendie ou
d'électrocution.
• Avertissement : cet appareil est
conçu pour être installé/connecté à
une connexion de mise à la terre dans
le bâtiment.
• Assurez-vous que les paramètres
figurant sur la plaque signalétique
correspondent aux données
électriques nominale de l’alimentation
secteur.
• Utilisez toujours une prise de courant
de sécurité correctement installée.
• N'utilisez pas d'adaptateurs multiprise
et de rallonges.
• Veillez à ne pas endommager la fiche
secteur ni le câble d'alimentation. Le
remplacement du câble d’alimentation
de l’appareil doit être effectué par
notre service après-vente agréé.
• Ne branchez la fiche secteur dans la
prise secteur qu'à la fin de
l'installation. Assurez-vous que la
prise secteur est accessible après
l'installation.
• Ne tirez pas sur le câble secteur pour
débrancher l'appareil. Tirez toujours
sur la fiche de la prise secteur.
• Cet appareil est fourni avec un câble
d'alimentation de 13 A. Si vous devez
changer le fusible de la fiche secteur,
utilisez uniquement un fusible 13 A
approuvé ASTA (BS 1362)
(Royaume-Uni et Irlande
uniquement).
2.3 Raccordement à l’arrivée
d’eau
• Veillez à ne pas endommager les
tuyaux de circulation d'eau.
• Avant d'installer des tuyaux neufs,
des tuyaux n'ayant pas servi depuis
longtemps, lorsqu'une réparation a
été effectuée ou qu'un nouveau
dispositif a été installé (compteurs
d'eau, etc.), laissez l'eau s'écouler
jusqu'à ce qu'elle soit parfaitement
propre et claire.
• Pendant et après la première
utilisation de l'appareil, vérifiez
qu'aucune fuite n'est visible.
• Si le tuyau d'arrivée d'eau est
endommagé, fermez immédiatement
l'arrivée d'eau et débranchez la prise
d'alimentation électrique. Contactez le
Centre après-vente agréé pour
procéder au remplacement du tuyau
d'arrivée d'eau.
• Sans alimentation électrique, le
système de protection d'eau n'est pas
actif. Dans ce cas, il existe un risque
d'inondation.
• Le tuyau d’arrivée d’eau est équipé
d’une vanne de sécurité et d’une
gaine avec un câble d’alimentation
interne.
AVERTISSEMENT!
Tension dangereuse.
2.4 Utilisation
• Ne placez pas de produits
inflammables ou d’éléments imbibés
de produits inflammables à l’intérieur,
à proximité ou au-dessus de
l’appareil.
• Les produits de lavage pour lave-
vaisselle sont dangereux. Suivez les
consignes de sécurité figurant sur
l'emballage du produit de lavage.
FRANÇAIS 29
• Ne buvez pas et ne jouez pas avec
l’eau de l’appareil.
• N'enlevez pas la vaisselle de
l'appareil avant la fin du programme. Il
se peut que la vaisselle contienne
encore du produit de lavage.
• Ne posez pas d’objets et n’appliquez
pas de pression sur la porte ouverte
de l'appareil.
• L’appareil peut dégager de la vapeur
chaude si vous ouvrez la porte
pendant le déroulement d’un
programme.
2.5 Service
• Pour réparer l'appareil, contactez le
service après-vente agréé. Utilisez
uniquement des pièces de rechange
d'origine.
• Veuillez noter qu’une autoréparation
ou une réparation non professionnelle
peuvent avoir des conséquences sur
la sécurité et annuler la garantie.
• Les pièces de rechange suivantes
seront disponibles pendant 7 ans
après l’arrêt du modèle : moteur,
pompe de circulation et de vidange,
éléments chauffants, dont
thermopompes, canalisations et
équipements correspondants dont
tuyaux, valves, filtres et électrovannes
(aquastops), pièces structurelles et
intérieures liées aux assemblages de
portes, cartes de circuits imprimés,
affichages électroniques, pressostats,
thermostats et capteurs, logiciel et
firmware dont logiciel de
réinitialisation. Veuillez noter que
certaines de ces pièces détachées ne
sont disponibles qu’auprès de
réparateurs professionnels et que
toutes les pièces détachées ne sont
pas adaptées à tous les modèles.
• Les pièces de rechange suivantes
seront disponibles pendant 10 ans
après l’arrêt du modèle : charnière et
joints de porte, autres joints, bras
d'aspersion, filtres de vidange,
supports intérieurs et périphériques
en plastique tels que paniers et
couvercles.
• Concernant la/les lampe(s) à
l’intérieur de ce produit et les lampes
de rechange vendues séparément :
Ces lampes sont conçues pour
résister à des conditions physiques
extrêmes dans les appareils
électroménagers, telles que la
température, les vibrations, l’humidité,
ou sont conçues pour signaler des
informations sur le statut opérationnel
de l’appareil. Elles ne sont pas
destinées à être utilisées dans
d'autres applications et ne
conviennent pas à l’éclairage des
pièces d’un logement.
2.6 Mise au rebut
AVERTISSEMENT!
Risque de blessure ou
d'asphyxie.
• Débranchez l'appareil de
l'alimentation électrique.
• Coupez le câble d'alimentation et
mettez-le au rebut.
• Retirez le dispositif de verrouillage de
la porte pour empêcher les enfants et
les animaux de s'enfermer dans
l'appareil.
www.electrolux.com30
3. DESCRIPTION DE L’APPAREIL
5 4810 9 11 67
12
2 31
1Plan de travail
2Bras d’aspersion supérieur
3Bras d’aspersion inférieur
4Filtres
5Plaque signalétique
6Réservoir de sel régénérant
7Fente d’aération
8Distributeur de liquide de rinçage
9Distributeur de détergent
10 Panier à couverts
11 Panier inférieur
12 Panier supérieur
Les images sont une
présentation générale. Pour
des informations plus
détaillées, consultez les
autres chapitres ou les
documents fournis avec
l’appareil.
FRANÇAIS 31
4. BANDEAU DE COMMANDE
1
2 4 5
68
3
7
1Touche marche/arrêt
2Touche Programme
3Voyants de programme
4Afficheur
5Touche Départ Différé
6Touche Option
7Voyants
8Touche Démarrer
4.1 Voyants
Voyant Description
Voyant du sel régénérant. Il s’allume lorsque le réservoir de sel régé‐
nérant doit être rempli. Il n’est jamais allumé lorsque le programme
est en cours.
Voyant du liquide de rinçage. Il s’allume lorsque le distributeur de li‐
quide de rinçage doit être rempli. Il n’est jamais allumé lorsque le pro‐
gramme est en cours.
Voyant de phase de lavage. Il s’allume au cours de la phase de lava‐
ge.
Voyant Phase de rinçage. Il s’allume au cours de la phase de rinçage.
Voyant de phase de séchage. Il est allumé lorsque vous sélectionnez
un programme avec la phase de séchage. Il clignote au cours de la
phase de séchage.
Voyant Delay. Il s’allume lorsque vous activez le départ différé.
Voyant GlassCare.
Voyant ExtraPower.
www.electrolux.com32
Voyant Description
Voyant ExtraHygiene.
5. PROGRAMMES
L’ordre des programmes figurant dans le tableau peut ne pas correspondre à leur
séquence sur le bandeau de commande.
Programme Charge du
lave-vais‐
selle
Degré de
salissure
Phases du program‐
me
Options
1) Vaisselle,
couverts,
casseroles
et poêles
Normal et
légèrement
sec
• Prélavage
• Lavage à 50 °C
• Rinçage intermédiai‐
re
• Rinçage final à
55 °C
• Séchage
• AirDry 2)
• ExtraPower
• GlassCare
• ExtraHygiene
Vaisselle,
couverts,
casseroles
et poêles
Normal à
important
et sec
• Prélavage
• Lavage à 60 °C
• Rinçage intermédiai‐
re
• Rinçage final à
60 °C
• Séchage
• AirDry 2)
• ExtraPower
• GlassCare
• ExtraHygiene
Vaisselle,
couverts,
casseroles
et poêles
Normal et
légèrement
sec
• Lavage à 60 °C
• Rinçage intermédiai‐
re
• Rinçage final à
55 °C
• Séchage
• AirDry 2)
• ExtraPower
• GlassCare
• ExtraHygiene
Vaisselle,
couverts
Frais et lé‐
gèrement
sec
• Lavage à 60 °C
• Rinçage intermédiai‐
re
• Rinçage final à
50 °C
• AirDry 2)
• ExtraPower
• GlassCare
• ExtraHygiene
Vaisselle,
couverts
Frais • Lavage à 50 °C
• Rinçage intermédiai‐
re
• Rinçage final à
50 °C
• AirDry 2)
• ExtraPower
• GlassCare
• ExtraHygiene
FRANÇAIS 33
Produkt Specifikationer
| Mærke: | Electrolux |
| Kategori: | Opvaskemaskine |
| Model: | ESS47300SX |
Har du brug for hjælp?
Hvis du har brug for hjælp til Electrolux ESS47300SX stil et spørgsmål nedenfor, og andre brugere vil svare dig
Opvaskemaskine Electrolux Manualer
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
6 Juni 2025
16 Januar 2025
21 December 2024
Opvaskemaskine Manualer
- Arçelik
- Respekta
- Medion
- Siemens
- Sharp
- High One
- BLANCO
- Gaggenau
- Therma
- SPT
- Kaiser
- Curtiss
- CDA
- Sandstrøm
- Whynter
Nyeste Opvaskemaskine Manualer
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025