Electrolux TY38TSILCN Manual

Electrolux Komfur TY38TSILCN

Læs gratis den danske manual til Electrolux TY38TSILCN (12 sider) i kategorien Komfur. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Electrolux TY38TSILCN, eller vil du spørge andre brugere om produktet?

Side 1/12
FLUSHKIT
EN Installation Instruction 2
FR Instructions d’installation 4
DE Montageanweisung 6
IT Istruzioni di installazione 8
2
INSTALLATION INSTRUCTIONS FOR THE FLUSH
INSTALLATION OF FRAMELESS HOBS
We recommend this variant for flush
installation due to the following advantages:
Convenient alignment of the height of
the hob in order to allow for tolerances
through deformable levelling
compounds.
A red sealing lip prevents the silicone
compound from seeping under the glass
plate.
8x 1x
ASSEMBLY
1. Peel off the protective film and apply the
self-adhesive seal right around the
cleaned rabbet support surface.
2. Apply two beads of levelling compound
on each side, with spacing of
approximately 80 mm from the corner
to the seal, and press gently.
80 80
3. Place the hob carefully and centrally
into the recess (recommendation: use a
suction pad).
4. Press the hob on by hand to align it to
the required vertical level relative to the
working surface. The red sealing lip
must be between the glass and the
rabbet recess on the side. In terms of
safety, it is advisable for the glass
surface to be installed between 0.2 and
1 mm below the working surface (it
traps the liquids that overflow).


Produkt Specifikationer

Mærke: Electrolux
Kategori: Komfur
Model: TY38TSILCN

Har du brug for hjælp?

Hvis du har brug for hjælp til Electrolux TY38TSILCN stil et spørgsmål nedenfor, og andre brugere vil svare dig