Empisal S4D Manual

Empisal Symaskine S4D

Læs gratis den danske manual til Empisal S4D (32 sider) i kategorien Symaskine. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Empisal S4D, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

MODEL: S4D

INSTRUCTION MANUAL

EMPISAL COMPLETE FREE ARM OVER LOCKER

your creative assistant

- 1 -

Safety instructions

Like any other electrical device, a overlock

machine can cause serious, even

life-threatening injuries.To avoid this, and in

order to work safely:

• Before initial use of your overlock machine,

read these operating instructions thoroughly.

• Keep the operating instructions in a suitable

place near the machine. When passing the

appliance on to others, always enclose the

operating instructions.

• Always disconnect the power supply when

leaving the machine unattended. This will

prevent the risk of accidents if the machine is

switched on accidentally.

• First pull the power plug before changing the

bulb or performing maintenance work on the

machine.

This will prevent possibly life-threatening

electric shocks.

• Do not remove the plug from the socket by

pulling on the cable. Always grip the plug and

not the cable when pulling out the power

plug.

• Only use the overlock machine in dry rooms.

• In case of any visible damage on the

machine, the foot switch or the power cable:

Have the damage repaired by Customer

Service before using the overlock machine

again.

• Never let children or elderly persons handle

the machine unsupervised because they may

not properly appreciate the possible dangers.

Keep electrical appliances outside the reach

of children.

• Never use the machine when the ventilation

apertures are blocked. Keep the ventilation

apertures of the machine and the foot switch

free from fluff, dust and waste material.

• This machine is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure that

they do not play with the machine

Warning

against injuries and

material damages:

According to legislation, you as the user of an

electrical appliance are responsible for preventing

possible accidents through safety-conscious

behaviour:

• Keep your work space tidy. An untidy workplace

can lead to accidents.

• Provide adequate lightingwhen working!

• Do not wear loose clothing or jewellery,as these

can be caught in the moving parts. You should

also wear a hair net if you have long hair.

• Avoid abnormal posture. Remain steady and in

a well-balanced position at all times.

• Be alert! Pay attention to what you are doing.

Always take a rational approach to your work.

Never work with the overlock machine if you are

unable to concentrate or if you are feeling

unwell!

If accidents occur as a result of handling the

machine with insufficient care, or failure to follow

the safety instructions in this manual, then the

manufacturer cannot accept liability.

If the supply cord that fixed with foot controller is

damaged, it must be replaced by the

manufacturer or its service agent or a similar

qualified person in order to avoid a hazard.

Please use for your overlock machine the

ZHEJIANG FOUNDER presser foot, type

KD-2902.

Power rating: 220 - 230V ~ , 50Hz

Current rating: 1.0A

Protection Class : II

Produkt Specifikationer

Mærke:	Empisal
Kategori:	Symaskine
Model:	S4D

Har du brug for hjælp?

Hvis du har brug for hjælp til Empisal S4D stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Symaskine Empisal Manualer

Empisal 760C Manual

5 September 2024

Empisal EEMC220 Manual

4 September 2024

Empisal Dress Maker 120A Manual

1 September 2024

Empisal Companion 500D Manual

1 September 2024

Empisal Companion 303E Manual

1 September 2024

Empisal Expression 889 Manual

1 September 2024

Empisal EECM9900 Manual

25 August 2024

Empisal 406E Manual

25 August 2024

Empisal 303E Manual

25 August 2024

Empisal Expressions 889 Manual

25 August 2024

Symaskine Manualer

Nyeste Symaskine Manualer

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

Juki MS-1261A-DWS Manual

9 August 2025