ENTES MCB-125 Manual

ENTES Ikke kategoriseret MCB-125

Læs gratis den danske manual til ENTES MCB-125 (22 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om ENTES MCB-125, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/22
A6768 / Rev.2 www.entes.com.tr
MCB-125/126 MULTIFUNCTION DIGITAL TIME RELAY
With 1 CO Contact
Operating Manual
Dudullu OSB; 1. Cadde; No: 23 34776 Umraniye - ISTANBUL / TURKEY
Tel : Fax : +90 216 313 01 10 +90 216 314 16 15
12
Precautions for Installation and Safe Use
If below precautions are not properly observed and carried out, it may result in cases with injury or
death.
· Disconnect power before working on the device.
· When device is connected to the network, do not remove the front panel.
· Do not clean the device with solvent or similar items. Only clean with dry cloth.
· Verify correct terminal connections before energizing the device.
· Install the device on the electrical panel.
· Contact your authorized reseller in case problems occur with your device.
·No responsibility is assured by the manufacturer or any of its subsidiaries for any
consequences rising out of not following above precautions.
1. INTRODUCTION
MCB-125/126 is a multifunction digital timer with 1 CO contact. It offers wide time adjustment range
between 0.1-9999 seconds/minutes.
1.1 Application
MCB-125/126 has 21 different functions with wide adjustable time ranges. The main application area
is the industrial and automation control systems.
The device has two dry contacts for START and STOP inputs.
1.2 Product Features
MCB-125/126 has the following features:
· 85-315 VAC/DC - MCB-125
10-30 VAC/DC - MCB-126
· 21 different functions
· 0.1-9999 seconds/minutes time range
· 1 relay output
· Start-Stop dry contact inputs
· Memorizing remaining time of function in case of a power outage
· Custom design LCD with green backlight
· SET, ESC, UP, DOWN buttons are located on front panel for easy programming
· PK25 DIN Rail mounting
1.3 Hardware Features
To operate functions with external triggering, the device has the necessary START and STOP dry contacts.
LCD
UP BUTTON
SET BUTTON
ESC BUTTON
DOWN BUTTON
Stop
Start
L N 4 5 6
C NCNO
R1
U

Produkt Specifikationer

Mærke: ENTES
Kategori: Ikke kategoriseret
Model: MCB-125

Har du brug for hjælp?

Hvis du har brug for hjælp til ENTES MCB-125 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret ENTES Manualer

ENTES

ENTES GEMO-02-DR-4G Manual

21 Juni 2025
ENTES

ENTES GEMO-02-4G Manual

15 Juni 2025
ENTES

ENTES GEMO-10-DR-4G Manual

14 Juni 2025
ENTES

ENTES GEMO-10-4G Manual

14 Juni 2025
ENTES

ENTES GEMO-10-SH-4G Manual

14 Juni 2025
ENTES

ENTES GKRC-22E Manual

3 Januar 2025
ENTES

ENTES GKRC-21E Manual

3 Januar 2025
ENTES

ENTES SER-YU Manual

20 November 2024
ENTES

ENTES ERB-50 Manual

6 September 2024
ENTES

ENTES GEM-10SH Manual

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman S-Series Classic S35 Manual

1 August 2025
Pro User

Pro User INV150N Manual

1 August 2025
Grundig

Grundig GIEI627374PN Manual

1 August 2025
Navman

Navman MiVue 730 Manual

1 August 2025
Pro User

Pro User PSI1000TX Manual

1 August 2025
Navman

Navman Drive Duo 2.0 Manual

1 August 2025
Navman

Navman MiVue 680 Manual

1 August 2025
Carrera

Carrera Sinus Ultra Manual

1 August 2025
Navman

Navman MiVue 630 Manual

1 August 2025
Hozelock

Hozelock 4712 Manual

1 August 2025