ENTES MCB-126 Manual

ENTES Ikke kategoriseret MCB-126

Læs gratis den danske manual til ENTES MCB-126 (22 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om ENTES MCB-126, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/22

A6768 / Rev.2 www.entes.com.tr

MCB-125/126 MULTIFUNCTION DIGITAL TIME RELAY

With 1 CO Contact

Operating Manual

Dudullu OSB; 1. Cadde; No: 23 34776 Umraniye - ISTANBUL / TURKEY

Tel : Fax : +90 216 313 01 10 +90 216 314 16 15

Precautions for Installation and Safe Use

If below precautions are not properly observed and carried out, it may result in cases with injury or

death.

· Disconnect power before working on the device.

· When device is connected to the network, do not remove the front panel.

· Do not clean the device with solvent or similar items. Only clean with dry cloth.

· Verify correct terminal connections before energizing the device.

· Install the device on the electrical panel.

· Contact your authorized reseller in case problems occur with your device.

·No responsibility is assured by the manufacturer or any of its subsidiaries for any

consequences rising out of not following above precautions.

1. INTRODUCTION

MCB-125/126 is a multifunction digital timer with 1 CO contact. It offers wide time adjustment range

between 0.1-9999 seconds/minutes.

1.1 Application

MCB-125/126 has 21 different functions with wide adjustable time ranges. The main application area

is the industrial and automation control systems.

The device has two dry contacts for START and STOP inputs.

1.2 Product Features

MCB-125/126 has the following features:

· 85-315 VAC/DC - MCB-125

10-30 VAC/DC - MCB-126

· 21 different functions

· 0.1-9999 seconds/minutes time range

· 1 relay output

· Start-Stop dry contact inputs

· Memorizing remaining time of function in case of a power outage

· Custom design LCD with green backlight

· SET, ESC, UP, DOWN buttons are located on front panel for easy programming

· PK25 DIN Rail mounting

1.3 Hardware Features

To operate functions with external triggering, the device has the necessary START and STOP dry contacts.

LCD

UP BUTTON

SET BUTTON

ESC BUTTON

DOWN BUTTON

Stop

Start

L N 4 5 6

C NCNO

Produkt Specifikationer

Mærke:	ENTES
Kategori:	Ikke kategoriseret
Model:	MCB-126

Har du brug for hjælp?

Hvis du har brug for hjælp til ENTES MCB-126 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret ENTES Manualer

ENTES GEMO-02-DR-4G Manual

21 Juni 2025

ENTES GEMO-02-4G Manual

15 Juni 2025

ENTES GEMO-10-DR-4G Manual

14 Juni 2025

ENTES GEMO-10-4G Manual

14 Juni 2025

ENTES GEMO-10-SH-4G Manual

14 Juni 2025

ENTES GKRC-22E Manual

3 Januar 2025

ENTES GKRC-21E Manual

3 Januar 2025

ENTES SER-YU Manual

20 November 2024

ENTES ERB-50 Manual

6 September 2024

ENTES GEM-10SH Manual

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tripp Lite TLM406NC Manual

31 Juli 2025

Tripp Lite Protect It! TLP76RBTEL Manual

31 Juli 2025

Tripp Lite N286-40G-ESR4-J Manual

31 Juli 2025

Emos H5011 Manual

31 Juli 2025

Emos ZM6145 Manual

31 Juli 2025

Oppo Find X7 Manual

31 Juli 2025

Intellinet 713191 Manual

31 Juli 2025

Emos DCFW01 Manual

31 Juli 2025

AIC RSC-3ET Manual

31 Juli 2025

Tone City King Of Blues Overdrive Manual

31 Juli 2025