Extech ET60 Manual

Extech Måling ET60

Læs gratis den danske manual til Extech ET60 (2 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Extech ET60, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ET60-en-US_V1.1 03/22

User Manual

Model ET60

Voltage/Continuity Tester

Introduction

The ET60 is an AC/DC Voltage tester with continuity check, NCV

detector and a work light. The attached test leads are connected

with 24” of 18-gauge wire rated at 600V. The 6” test lead

handles include spring loaded protective tip sleeves.

AC/DC Voltage

Always test on a known live circuit before use.

To check for voltage, insert test leads into outlet or carefully touch test leads

to the electrical contacts or circuit to be tested. If voltage is present, the LED

indicators will illuminate in the correct range.

Use the highest illuminated range to determine the correct voltage. If the

readings are greater than 120VAC or 48VDC, the meter will vibrate.

Non-Contact Voltage (NCV)

Always test on a known live circuit before use.

To check for non-contact voltage, place the meter near a source of electrical

energy. Press the ON/OFF button to measure NCV voltage. Note that the tip of

the meter offers the highest sensitivity. If voltage is present, the LED

indicators will illuminate.

Continuity

WARNING: To avoid electric shock, never measure continuity on circuits

that have voltage on them.

Touch the test leads to the circuit under test. The bulb at the top of the

meter will illuminate if there is continuity.

Worklight

Press the ON/OFF button to activate the work light and to measure NCV.

WARNINGS:

• Risk of Electric Shock. Always check proper operation on a known live circuit

before using.

• Never ground yourself when making electrical measurements.

• Do not use outside of rated voltages.

• Do not use in wet weather.

CAUTION: Use extreme caution when checking electrical circuits to avoid

injury due to electrical shock. FLIR Systems, Inc. assumes basic knowledge of

electricity on the part of the user and is not responsible for any injury or

damages due to improper use of this tester.

Produkt Specifikationer

Mærke:	Extech
Kategori:	Måling
Model:	ET60

Har du brug for hjælp?

Hvis du har brug for hjælp til Extech ET60 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Extech Manualer

29 November 2025

29 November 2025

29 November 2025

29 November 2025

29 November 2025

29 November 2025

29 November 2025

29 November 2025

29 November 2025

29 November 2025

Måling Manualer

Nyeste Måling Manualer

FLIR E75 Manual

28 November 2025

Bosch GLM 40-31 Professional Manual

28 November 2025

Terraillon COACH Manual

27 November 2025

FLIR T530 Manual

27 November 2025

FLIR TG268 Manual

27 November 2025

Testo 558s Manual

26 November 2025

Terraillon Window Coach Manual

26 November 2025

Eastron SEM1 Manual

25 November 2025

Vevor SC256M Manual

25 November 2025

Vevor SD304 Manual

25 November 2025