
HDV-5CAM-10F-mul_V1.3   1/16 
 
Informational sheet 
 
 
 
 
Model HDV-5CAM-10F 
Long Depth of Field Flexible Probe 
For use with the HDV600 Borescope only 
 
 
Thank you for purchasing this professional camera probe. This 
sheet covers the warning and specifications for the probe only. 
Instructions regarding the usage of the HDV600 Borescope are 
provided in the Borescope User Guide. 
 
Note: The camera LEDs become warm when set to maximum 
intensity 
 
The label on the probe provides the Serial Number and Part 
Number in the format shown below. Please do not remove this 
label; otherwise the warranty will be invalid. 
 
Part No.TX1 F/M/R (flex/macro/rigid) Serial No: HDV110001 
 
 
 
Warnings 
  
  Do not bend to a smaller diameter than 10cm (4”) 
  Warranty is invalid if stickers, tags, or labels are removed 
 
 
Specifications 
 
Resolution  640 x 480 pixels 
Length  10m (32.1’) 
Outer diameter (O.D.)  5.5mm (0.22”) 
Focus distance  6cm to ∞ (2.36” to ∞)  
Housing  Stainless Steel 
Field of View  65º 
Number of LEDs  4 
Lamp Output  3500 Lux at 20mm 
Operating Temperature  -20 to 70°C (-4 to 158°F) 
Storage Temperature  -20 to 70°C (-4 to 158°F) 
This is product is warranted for one year. 
 
Copyright © 2011-2016 FLIR Systems, Inc. 
All rights reserved including the right of reproduction in whole or in part in any form. 
www.extech.com 
 
 
Hoja informativa 
 
 
 
 
 
Modelo HDV-5CAM-10F 
Detector flexible con profundidad de campo 
larga 
Sólo para uso con el boroscopio HDV600 
 
Gracias por comprar este detector de cámara profesional. Esta 
hoja sólo cubre las advertencias y las especificaciones del 
detector. Las instrucciones sobre el uso del boroscopio HDV600 
se proporcionan en la Guía del usuario boroscopio. 
 
Nota: Los LED de la cámara se calientan cuando se fijan a la 
máxima intensidad 
 
La etiqueta del detector proporciona el número de serie y número 
de pieza en el formato que se muestra a continuación. Por favor, 
no quite esta etiqueta; de lo contrario la garantía no será válida. 
 
Parte N º TX1 F/M/R (Flex/macro/rígida) N º de serie: 
HDV110001 
 
Advertencias 
  
  No doble a un diámetro menor de 10 cm (4”) 
  La garantía no es válida si se quitan las etiquetas o 
calcomanías 
 
Especificaciones 
 
Resolución  640 x 480 píxeles 
Longitud  10 m (32.1’) 
Diámetro exterior (OD)  5.5mm (0.22”) 
Distancia de enfoque  6cm a ∞ (2.36” a ∞)  
Caja  acero inoxidable 
Campo de visión  65° 
Número de lámparas  4 
Salida de lámpara   3500 Lux a 20mm 
Temperatura de operación  -20 a 70°C (-4 a 158°F) 
Temperatura de almacenamiento -20 a 70°C (-4 a 158°F) 
Esto es producto está garantizado por un año. 
 
Copyright © 2011-2016 FLIR Systems, Inc, 
Reservados todos los derechos, incluyendo el derecho de reproducción total o parcial en cualquier 
medio. 
www.extech.com 
 
Fiche d’informations 
 
 
 
 
 
Modèle HDV-5CAM-10F 
Sonde flexible à grande profondeur de champ 
Pour utilisation avec l’endoscope HDV600 uniquement 
 
 
Nous vous remercions d’avoir acheté cette sonde caméra 
professionnelle. Cette fiche couvre les avertissements et les 
spécifications concernant la sonde uniquement. Les instructions 
concernant l’utilisation de l’endoscope HDV600 sont fournies 
dans le manuel d’utilisation de l’endoscope. 
 
Remarque : Les LED de la caméra atteignent une température 
élevée lorsque l'intensité est réglée sur le niveau maximal. 
 
L’étiquette apposée sur la sonde comporte le numéro de série et 
le numéro de la pièce dans le format indiqué ci-dessous. Veuillez 
ne pas retirer cette étiquette; autrement, la garantie perdra sa 
validité. 
 
Part No.TX1 F/M/R (flex/macro/rigid) Serial No: HDV110001 
 
Avertissements 
 Ne pliez pas jusqu’à un diamètre inférieur à 10 cm (4 pouces) 
  La garantie n’est pas valable si les autocollants, les 
plaques ou les étiquettes sont retirés. 
 
Caractéristiques 
 
Résolution  640 x 480 pixels 
Longueur  10 m (32,1 pouces) 
Diamètre extérieur  5,5 mm (0,22 pouce) 
Distance de mise au point  6 cm à ∞ (2,36 pouces à ∞)  
Boîtier  en acier inoxydable 
Champ de visualisation  65° 
Nombre d’ampoules  4 
Puissance des ampoules  3500 Lux à 20mm 
Température de fonctionnement  -20 à 70 °C (-4 à 158 °F) 
Température de stockage  -20 à 70 °C(-4 à 158 °F) 
Ce produit est garanti pour un an. 
 
Copyright © 2011-2016 FLIR Systems, Inc. 
Tous droits réservés, y compris le droit de reproduction, en tout ou en partie, sous quelque forme que 
ce soit. 
www.extech.com