Extech HDV-5CAM-1RM Manual

Extech Videokamera HDV-5CAM-1RM

Læs gratis den danske manual til Extech HDV-5CAM-1RM (2 sider) i kategorien Videokamera. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Extech HDV-5CAM-1RM, eller vil du spørge andre brugere om produktet?

Side 1/2
HDV-5CAM-1RM-mul_V1.3 2/16
Informational sheet
Model HDV-5CAM-1RM
Macro Lens Rigid Probe
For use with the HDV600 Borescope only
Thank you for purchasing this professional camera probe. This
sheet covers the warning and specifications for the probe only.
Instructions regarding the usage of the HDV600 Borescope are
provided in the Borescope User Guide.
Note: The camera LEDs become warm when set to maximum
intensity
The label on the probe provides the Serial Number and Part
Number in the format shown below. Please do not remove this
label; otherwise the warranty will be invalid.
Part No.TX1 F/M/R (flex/macro/rigid) Serial No: HDV110001
Warnings
Do not bend to a smaller diameter than 10cm (4”)
Warranty is invalid if stickers, tags, or labels are removed
Specifications
Resolution 640 x 480 pixels
Length 1m (3.3’)
Outer diameter (O.D.) 5.5mm (0.22”)
Focus distance 2 to 6cm (0.79 to 2.36”)
Housing Stainless Steel
Field of View 65º
Number of LEDs 4
Lamp Output 3500 Lux at 20mm
Operating Temperature -20 to 70°C (-4 to 158°F)
Storage Temperature -20 to 70°C (-4 to 158°F)
This is product is warranted for one year.
Copyright © 2011-2016 FLIR Systems, Inc.
All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
Hoja informativa
Modelo HDV-5CAM-1RM
Detector rígido con lente macro
Sólo para uso con el boroscopio HDV600
Gracias por comprar este detector de cámara profesional. Esta
hoja sólo cubre las advertencias y las especificaciones del
detector. Las instrucciones sobre el uso del boroscopio HDV600
se proporcionan en la Guía del usuario boroscopio.
Nota: Los LED de la cámara se calientan cuando se fijan a la
máxima intensidad.
La etiqueta del detector proporciona el número de serie y número
de pieza en el formato que se muestra a continuación. Por favor,
no quite esta etiqueta; de lo contrario la garantía no será válida.
Parte N º TX1 F/M/R (Flex/macro/rígida) N º de serie:
HDV110001
Advertencias
No doble a un diámetro menor de 10 cm (4”)
La garantía no es válida si se quitan las etiquetas o
calcomanías
Especificaciones
Resolución 640 x 480 píxeles
Longitud 1 m (3.3’)
Diámetro exterior (OD) 5.5mm (0.22”)
La distancia de enfoque 2 a 6 cm (0.79 a 2.36”)
Caja acero inoxidable
Campo de visión 65°
Número de lámparas 4
Salida de lámpara 3500 Lux a 20mm
Temperatura de operación -20 a 70°C (-4 a 158°F)
Temperatura de almacenamiento -20 a 70°C (-4 a 158°F)
Esto es producto está garantizado por un año.
Copyright © 2011-2016 FLIR Systems, Inc
Reservados todos los derechos, incluyendo el derecho de reproducción total o parcial en cualquier
medio.
www.extech.com
Fiche d’informations
Modèle HDV-5CAM-1RM
Sonde rigide à macro-objectif
Pour utilisation avec l’endoscope HDV600 uniquement
Nous vous remercions d’avoir acheté cette sonde caméra
professionnelle. Cette fiche couvre les avertissements et les
spécifications concernant la sonde uniquement. Les instructions
concernant l’utilisation de l’endoscope HDV600 sont fournies
dans le manuel d’utilisation de l’endoscope.
Remarque : Les LED de la caméra atteignent une température
élevée lorsque l'intensité est réglée sur le niveau maximal.
L’étiquette apposée sur la sonde comporte le numéro de série et
le numéro de la pièce dans le format indiqué ci-dessous. Veuillez
ne pas retirer cette étiquette ; autrement, la garantie perdra sa
validité.
Part No.TX1 F/M/R (flex/macro/rigid) Serial No: HDV110001
Avertissements
Ne pliez pas jusqu’à un diamètre inférieur à 10 cm (4
pouces)
La garantie n’est pas valable si les autocollants, les
plaques ou les étiquettes sont retirés.
Caractéristiques
Résolution 640 x 480 pixels
Longueur 1 m (3,3 pouces)
Diamètre extérieur 5,5 mm (0,22 pouce)
Distance de mise au point 2 à 6 cm (0,79 à 2,36
pouces)
Boîtier en acier inoxydable
Champ de visualisation 65°
Nombre d’ampoules 4
Puissance des ampoules 3500 Lux à 20mm
Température de fonctionnement -20 à 70 °C (-4 à 158 °F)
Température de stockage -20 à 70 °C(-4 à 158 °F)
Ce produit est garanti pour un an.
Copyright © 2011-2016 FLIR Systems, Inc.
Tous droits réservés, y compris le droit de reproduction, en tout ou en partie, sous quelque forme que
ce soit.
www.extech.com


Produkt Specifikationer

Mærke: Extech
Kategori: Videokamera
Model: HDV-5CAM-1RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Extech HDV-5CAM-1RM stil et spørgsmål nedenfor, og andre brugere vil svare dig




Videokamera Extech Manualer

Extech

Extech BR-9CAM-5M Manual

8 Oktober 2025
Extech

Extech BR9CAM-2M Manual

8 Oktober 2025
Extech

Extech BR-9CAM Manual

8 Oktober 2025
Extech

Extech BR200 Manual

20 September 2025
Extech

Extech BR70 Manual

19 September 2025
Extech

Extech HDV-5CAM-3F Manual

19 September 2025
Extech

Extech BRD10 Manual

19 September 2025
Extech

Extech BR-5CAM Manual

25 August 2025
Extech

Extech HDV700 Manual

4 September 2024
Extech

Extech HDV-5CAM-3R Manual

2 September 2024

Videokamera Manualer

Nyeste Videokamera Manualer