Extron IN1806 Manual

Extron Ikke kategoriseret IN1806

Læs gratis den danske manual til Extron IN1806 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 112 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 56.5 anmeldelser. Har du et spørgsmål om Extron IN1806, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
1
IMPORTANT:
Go to www.extron.com for the complete
user guide, installation instructions, and
specifications before connecting the
product to the power source.
IN1806 • Setup Guide
The Extron IN1806 is a six input seamless scaling presentation switcher that supports signal resolutions up to 4K @ 60 Hz at
4:4:4. It features DisplayPort and HDMI inputs, an HDMI output, and a mirrored Extron DTP2 output for extending video, audio,
and control signals up to 330 feet (100 meters) over a shielded CATx cable. The IN1806 delivers high image quality, fast and
reliable switching, Extron ProDSP audio processing, seamless video transition effects, logo keying, and HDMI loop-out. The
scaler can be controlled and congured over Ethernet, RS-232, or USB.
This guide provides instructions for an experienced user to set up and congure the IN1806 scaler. It covers how to perform basic
NOTES:
• For full installation, configuration, menus, connector wiring, and operation details, see the IN1806 and IN1808 Series
User Guide at www.extron.com.
• The IN1806 can also be configured via the Extron Product Configuration Software (PCS), available at
www.extron.com. For information on using PCS, see the IN1806 and IN1808 Series Help File.
Installation
Rear Panel Features
100-240V 0.7A MAX ~
31
2
5
4 6
HDMI/CEC
INPUTS AUDIO INPUTS OUTPUTS REMOTE
OVER TP
IN1806
1A 1B
SIG LINK
OUT
Tx Rx
RS-232
GTx Rx
IR
G
RESET
1 2
3 4
+48V
+48V
1
2
MIC/LINE
L R
AUX
3 4
LAN
LOOP OUT
A
C
H
M
N
B
D E
F
G
I
J
K
L
O
OUTPUTS (DTP2/XTP/HDBT)
50-60 Hz
A
AC power connector
B
DisplayPort input connector (input 1)
C
HDMI (with CEC) loop out connector
D
HDMI (with CEC) output connector (1A)
E
DTP2/XTP/HDBaseT (with CEC)
output connector (1B)
F
Over TP IR pass-through connector
G
Analog line audio inputs 3 and 4
H
Analog mic/line audio inputs 1 and 2
and adjacent phantom power LEDs
I
Analog line audio outputs 1 through 4
J
LAN connector
K
Remote RS-232 port
L
Reset LED
M
Reset button
N
Aux mono or stereo analog
line audio input connector
O
HDMI inputs 2 through 6
Figure 1. Rear Panel Connectors — IN1806
Mounting and Cabling
Step 1 Mount the device—
a. Turn off or disconnect all equipment power sources.
b. Mount the IN1806 to a rack using the pre-installed side mounting brackets, or remove the brackets and use an optional
19-inch kit for under-desk mounting (see the instructions provided with the mounting kit, available at www.extron.com).
Step 2 Connect inputs—
a. Make the following video input connections as needed:
• Connect a DP source to the Input 1 DisplayPort connector (see figure 1,
B
).
• Connect digital HDMI or DVI (with an appropriate adapter) sources to HDMI input connectors 2 through 6 (
O
).
b. Connect analog audio sources to:
• The 5-pole captive screw line audio input connectors 3 and 4 (
G
) and the Aux connector (
N
) for balanced or
unbalanced stereo audio. The Aux Line input (
N
) is shared and can be associated with one or more video inputs.
• Connect balanced or unbalanced mic or line level inputs to 3-pole Mic/Line captive screw connectors 1 and 2 (
H
).
These inputs support optional +48 VDC phantom power, which is indicated by the LEDs at the left of the connectors.
2
IN1806 • Setup Guide (Continued)
Step 3 Connect outputs—
Make the following output connections as needed:
• Connect an HDMI, or DVI with an appropriate adapter, display to HDMI/CEC output connector 1A (see figure 1,
D
, on the
previous page). Connect a display to the HDMI Loop Out connector (
C
).
• Connect a DTP/XTP matrix switcher/HDBaseT compatible receiver to output connector 1B (
E
). For cable wiring and
recommendations, see “Twisted Pair Recommendations for DTP, XTP, and HDBaseT Communication.”
• Connect balanced or unbalanced analog audio output devices to one or both 5-pole captive screw output connector pairs 1
and 2, or 3 and 4 (
I
) (see on the next page for more information).Audio Wiring
To pass infrared data, connect a control device to the 3-pole IR Over DTP captive screw connector (see , IR Over TP Wiring
on the next page). Alternatively, insert RS-232 communication to a DTP/HDBaseT endpoint via Ethernet (see the IN1806 and
IN1808 Series User Guide for more information).
Step 4 — Connect control devices
• To control the IN1806 through Ethernet, connect a LAN or WAN to the RJ-45 LAN connector (
J
). To wire the RJ-45
connector to the cable, see “Twisted Pair Recommendations for DTP, XTP, and HDBaseT Communication.” The default IP
address of the scaler is 192.168.254.254, the default subnet mask is 255.255.255.0, and the default gateway address is
0.0.0.0.
• For serial RS-232 control, connect a host device to the 3-pole captive screw connector (
K
). The default baud rate is 9600.
• For control through USB, connect a host device to the front panel USB mini-B port (see figure 2,
A
, on the next page).
Step 5 Connect power—
Connect a 100 to 240 VAC, 50-60 Hz power source to the AC power connector (see figure 1,
A
, on the previous page).
Twisted Pair Recommendations for DTP, XTP, and
HDBaseT Communication
Extron recommends using the following practices to achieve full transmission distances
and reduce transmission errors:
• Use Extron XTP/DTP 24 SF/UTP cable for the best performance. At a minimum,
Extron recommends 24 AWG, solid conductor, STP cable with a minimum bandwidth
of 400 MHz.
• Terminate cables with shielded connectors to the TIA/EIA-T568B standard (shown at
right).
• Limit the use of more than two pass-through points, which may include patch points,
punch down connectors, couplers, and power injectors. If these pass-through points
are required, use shielded couplers and punch down connectors.
ATTENTION:
• Do not connect these connectors to a computer or telecommunications network.
• Ne connectez pas ces ports à des données informatiques ou à un réseau de télécommunications.
• DTP remote power is intended for indoor use only. No part of the network that uses DTP remote power should be
routed outdoors.
• L’alimentation DTP à distance est destiné à une utilisation en intérieur seulement. Aucune partie du réseau qui utilise
l’alimentation DTP à distance ne peut être routée en extérieur.
NOTE: When using shielded twisted pair cable in bundles or conduits, consider the following:
• Do not exceed 40% fill capacity in conduits.
• Do not comb the cable for the first 20 meters, where cables are straightened, aligned, and secured in tight bundles.
• Loosely place cables and limit the use of tie wraps or hook-and-loop fasteners.
• Separate twisted pair cables from AC power cables.
Firmware Updates
Download rmware updates from the Extron website and upload them via the internal web pages or PCS.
TIA/EIA-T568B
Pin Wire Color
1 White-orange
2 Orange
3 White-green
4 Blue
5 White-blue
6 Green
7 White-brown
8 Brown
1 2 3 4 5 6 7 8
RJ-45
Connector
Insert istedTw
Pair Wires
Pins:

Produkt Specifikationer

Mærke: Extron
Kategori: Ikke kategoriseret
Model: IN1806

Har du brug for hjælp?

Hvis du har brug for hjælp til Extron IN1806 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Extron Manualer

Extron

Extron DSC DP-HD A Manual

29 August 2025
Extron

Extron Retractor SM Network Manual

29 August 2025
Extron

Extron RGB-HDMI 300 A Manual

28 August 2025
Extron

Extron DSC HD-HD 4K PLUS A Manual

28 August 2025
Extron

Extron IPL Pro S3 Manual

28 August 2025
Extron

Extron DMP 44 LC Manual

28 August 2025
Extron

Extron DSC HD-HD 4K PLUS A xi Manual

28 August 2025
Extron

Extron TLP Pro 1220MG Manual

28 August 2025
Extron

Extron DMP 128 C AT Manual

28 August 2025
Extron

Extron VSC 700D Manual

28 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Mahlkönig

Mahlkönig E80S Manual

17 September 2025
Vestil

Vestil PLB/S-7 Manual

17 September 2025
Quick Dam

Quick Dam Flood Gate QDFG30 Manual

17 September 2025
Vestil

Vestil VHSR-4 Manual

17 September 2025
Kemo

Kemo M012 Manual

17 September 2025
Vestil

Vestil COL-4-36-23 Manual

17 September 2025
Vestil

Vestil BOL-42-4.5 Manual

17 September 2025
Wesco

Wesco 272937 Manual

17 September 2025
Vestil

Vestil COL-4-36-44-HDG Manual

17 September 2025
Vestil

Vestil DR-LOCK Manual

17 September 2025