APPLICATIONS
TECHNICAL SPECIFICATIONS PHYSICAL SPECIFICATIONS
The FBT VERTUS CLA 206A two-way bi-amplified speaker system incorporates 2 x 6,5” custom woofer with 1,5” voice coil and 1 x
1,4" B&C HF neodymium driver with 2,5 voice coil. The internal Class D amplifier module constructed in die-cast aluminum delivers
600W for LF, 300W for HF and DSP processor with 8 equalization presets provide unexpected dynamics in a system of these
dimensions. The FBT VERTUS CLA 206A shall meet the following performance criteria: frequency response from 65Hz to 20kHz,
maximum SPL of 133dB, horizontal coverage angle of 100°, vertical coverage angle 25°. The FBT VERTUS CLA 206A feature a
0,47" birch plywood with internal metal bracing and the front shall be protected by a heavy duty metal grille. The control panel
provides Level control, HF level, Preset, HP filter, Gnd lift, 3 status led ( on, peak, prt/limit ), XLR input & link and Neutrik Powercon
Cable Duplex for power supply. New hardware for flying installations, for ground setups and the possibility of coupling two or more
FBT CLA 406.2A / CLA 206A with an angle of 0° - 20°; top side inclined 20°; It can be integrated elegantly and with minimal intrusion
into any environment. The system can be used both in small point source systems with the VERTUS CLA 118SA sub and in clusters
of two to have a dispersion of 40° vertical.
Ideal for both live applications, assisted by the CLA118SA active subwoofer, as
well as for fixed installation
2 way bi-amplified line array column
0,47" birch plywood with scratch resistant varnish
2 x 6,5" custom woofer with 1,5" voice coil
Neodymium B&C compression HF driver with 1,4" throat and 2,5" voice coil
Class D 600W RMS amplifier for LF and 300W RMS for HF
DSP processor with 8 equalization presets
100°H x 25°V dispersion
Completely Manufactured in Italy
2 way bi- biamplified
65Hz - 20kHz
100° H x 25° V
1.2 kHz
640 W
AC Power requirement
133dB
190 x 777 x 290mm
44,09 lbs / 20 kg
51,80 lbs / 23,5 kg
2 x 6,5" - 1,5" coil
7,48" x 30,59" x 11,41"
306 x 875 x 416mm
12,04" x 34,44" x 16,37"
0,47" birch plywood
Built-in Amplifiers LF / HF *max.: 600W RMS / 300W RMS
max. peak.: 1200W / 600W
Input Impedance 22kOhm
Maximum SPL ( peak ) **
16,40 ft / 5 mt.Power cord
XLR with loop
MAX.: 2mS burst, rms power on nominal speaker impedance
MAX PEAK: based on max peak output voltage and nominal speaker impedance
PEAK SPL: free space, based on max peak power amp rating and system peak sensitivity, 10mS time average
1 x 1,4" - 2,5" coil
CLA 206A
Active Column Line Array
FEATURES
PRODUCT DESCRIPTION
