FERM TJM1014 Manual

FERM Ikke kategoriseret TJM1014

Læs gratis den danske manual til FERM TJM1014 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om FERM TJM1014, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0302-13

Art.nr. 340390/-395

FRJ-3.0/-2.25

UK USERS MANUAL 02

GEBRAUCHSANWEISUNG 04

GEBRUIKSAANWIJZING 06

MODE D’EMPLOI 08

NÁVOD K POUŽITÍ 10

UK Subject to change

D Änderungen vorbehalten

NL Wijzigingen voorbehouden

F Sous réserve de modifications

CZ Změny vyhrazeny

Ferm 15

ROLLEY JACK

TECHNICAL SPECIFICATIONS FRJ-3.0

TECHNICAL SPECIFICATIONS FRJ-2.25

SAFETY INSTRUCTIONS

The following symbols are used in these instructions for

use:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of the

instructions in this manual.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

KNOW YOUR APPARATUS

Observe the instructions for maintenance to ensure

your apparatus always operates properly.

Before attempting to operate the rolley jack, familiarise

yourself with the controls. Save this user’s manual and

the other documents supplied with this tool for future

reference.

GENERAL SAFETY RULES

• Keep the work area clean.

A cluttered work area may cause accidents.

Make sure the work area is well-lit.

• Keep children away.

• Never allow children or spectators to touch the

tools, keep them at a safe distance from the work

area.

• Store tools in a safe place.

• Tools that are not used must be stored in a dry and

locked placed, out of the reach of children.

• Do not force the tool.

• The machine will do the job better and safer at the

rate for which it was intended. Damage caused by

forcing the tool is not covered by the warranty.

• Use the right type of tool.

• Do not use low-powered tools for heavy-duty ope-

rations. Never use the machine other than for its

intended purpose.

• Posture.

• Do not over-reach. Be sure of your footing and

balance at all times.

• Maintain the tool with care.

• The tool works best and safest if it is kept clean. Keep

the tool dry and free from oil and grease.

• Stay alert.

• Watch what you are doing, use your common sense,

do not operate the tool when you cannot concen-

trate on the job.

• Check the machine for damage.

Before starting the machine, check that all safety devi-

ces and damaged parts operate smoothly and effi-

ciently.

Make sure all moving parts are in good working order.

Check the machine for any broken or jamming parts,

make sure all parts are fitted properly and any other

conditions that might affect the functioning of the tool

are favourable.

• Have your tool repaired by an expert!

• This electric appliance is in accordance with the rele-

vant safety rules. Repairing of electric appliances may

be carried out only by experts other wise it may

cause considerable danger for the user.

SPECIAL SAFETY RULES

Non-observance of the following instructions can

cause personal injuries and/or damage to the vehicle.

• Place the saddle of the jack only in the spot designed

for this purpose. For the relevant jacking points ple-

ase refer to your car instructions.

• The maximum load indicated on the jack must never

be exceeded.

• The jack must be used as a lifting device only.

• Always place the jack on a hard and level surface.

• Always protect the car from rolling away. Before jac-

king up the car, place chocks behind and in front of

the wheels remaining on the ground. Put the car in

first gear or put on the handbrake to further block

the car.

• Make sure to place the jack in such a way that your

hand is not underneath the car when jacking it up.

• Make sure the jack is horizontal.

• For your own safety, before working or crawling

underneath the car jackup the car and support the

shafts.

• Before using the shaft supports make sure they are in

good condition.

Max. lifting load (kg) | 2250

Min. disc height (mm) | 140

Max. disc height (mm) | 495

Weight (kg) | 35

Max. lifting load (kg) | 3000

Min. disc height (mm) | 150

Max. disc height (mm) | 510

Weight (kg) | 39,5

UK English

2Ferm

EXTRA EXPLODED VIEW FRJ-2.25

Produkt Specifikationer

Mærke:	FERM
Kategori:	Ikke kategoriseret
Model:	TJM1014

Har du brug for hjælp?

Hvis du har brug for hjælp til FERM TJM1014 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret FERM Manualer

26 August 2024

25 August 2024

14 August 2024

10 August 2024

6 August 2024

6 August 2024

6 August 2024

5 August 2024

4 August 2024

3 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AXESS AXABH-FD1 Manual

30 Juli 2025

Yealink SIP-T23P Manual

30 Juli 2025

Tripp Lite TLM606NC Manual

30 Juli 2025

Yealink MeetingBoard 65 Manual

30 Juli 2025

Festo EMME-AS-80-M-HS-AMXB Manual

30 Juli 2025

Rothenberger ROGROOVER 1-12 Manual

30 Juli 2025

Advantech WISE-750 Manual

30 Juli 2025

Heylo StaubStop 3000 Manual

30 Juli 2025

Advantech ARES-5222A Manual

30 Juli 2025

Tripp Lite SRGP1KO Manual

30 Juli 2025