Fluke 2000ACC Manual

Fluke Ikke kategoriseret 2000ACC

Læs gratis den danske manual til Fluke 2000ACC (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Fluke 2000ACC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

2000ACC

Accessory Kit

Instructions

Contact Fluke

Fluke Corporation operates worldwide. For local contact

information, go to our website: www.fluke.com.

To register your product, or to view, print, or download the

latest manual or manual supplement, go to our website:

www.fluke.com/productinfo.

+1-425-446-5500 fluke-info@fluke.com

Safety Information

A Warning identifies hazardous conditions and procedures

that are dangerous to the user. A Caution identifies

conditions and procedures that can cause damage to the

Product or the equipment under test.

 Warning

To prevent possible electrical shock, fire, or

personal injury:

Read all safety information before you use the

Product.

Use the Product only as specified, or the protection

supplied by the Product can be compromised.

Carefully read all instructions.

Fluke Corporation

P.O. Box 9090

Everett WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

PN 5416998 (English)

1/2023

subject to change without notice. All Product names are

trademarks of their respective companies.



Comply with local and national safety codes. Use

personal protective equipment (approved rubber

gloves, face protection, and flame-resistant

clothes) to prevent shock and arc blast injury where

hazardous live conductors are exposed.

Use Product-approved measurement category

(CAT), voltage, and amperage rated accessories

(probes, test leads, and adapters) for all

measurements.

Do not touch voltages >30 V ac rms, 42 V ac peak,

or 60 V dc.

Do not use the Product around explosive gas,

vapor, or in damp or wet environments.

Do not exceed the Measurement Category (CAT)

rating of the lowest rated individual component of a

Product, probe, or accessory.

Do not use test leads if they are damaged. Examine

the test leads for damaged insulation, exposed

metal, or if the wear indicator (if present) shows.

Check test lead continuity.

Keep fingers behind the finger guards on the

probes.

Do not use in CAT III or CAT IV environments

without the protective cap (if included with the

Product) installed on test probe. The protective cap

decreases the exposed probe metal to <4 mm. This

decreases the possibility of arc flash from short

circuits.

Do not use a shrouded banana jack accessory such

as an alligator clip with an unshrouded 4 mm

banana probe tip terminal in a hazardous electrical

installation. Due to the lack of a shroud, the probe

tip connector does not provide suitable insulation

to accessible parts with this type of assembly.

Produkt Specifikationer

Mærke:	Fluke
Kategori:	Ikke kategoriseret
Model:	2000ACC

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke 2000ACC stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Fluke Manualer

Fluke 1630-2 FC Manual

25 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Fluke SmartTrace BK120 Manual

20 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Salton MP1206 Manual

31 August 2025

TensCare Sports TENS 2 Manual

31 August 2025

Pardini K58 Manual

31 August 2025

Salton SCG-4 Manual

31 August 2025

Salton JK-1103 Manual

31 August 2025

Salton WC-2040 Manual

31 August 2025

Salton WC-2070 Manual

31 August 2025

Salton SP1963 Manual

31 August 2025

Gram EFI 8060-91 B Manual

31 August 2025

Analog Way Orchestra² Manual

31 August 2025