Fluke 700PCK Manual

Fluke Ikke kategoriseret 700PCK

Læs gratis den danske manual til Fluke 700PCK (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Fluke 700PCK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

PN 200086

May 1995 Rev.3, 8/12

All product names are trademarks of their respective companies.

Limited Warranty

Each Fluke product is warranted to be free from defects in material and

workmanship under normal use and service. The warranty period is one year

and begins on the date of shipment. Parts, product repairs, and services are

warranted for 90 days. This warranty extends only to the original buyer or end-

user customer of a Fluke authorized reseller, and does not apply to fuses,

disposable batteries, or to any product which, in Fluke's opinion, has been

misused, altered, neglected, contaminated, or damaged by accident or

abnormal conditions of operation or handling. Fluke warrants that software will

operate substantially in accordance with its functional specifications for 90

days and that it has been properly recorded on non-defective media. Fluke

does not warrant that software will be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused

products to end-user customers only but have no authority to extend a greater

or different warranty on behalf of Fluke. Warranty support is available only if

product is purchased through a Fluke authorized sales outlet or Buyer has paid

the applicable international price. Fluke reserves the right to invoice Buyer for

importation costs of repair/replacement parts when product purchased in one

country is submitted for repair in another country.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the

purchase price, free of charge repair, or replacement of a defective product

which is returned to a Fluke authorized service center within the warranty

period.

To obtain warranty service, contact your nearest Fluke authorized service

center to obtain return authorization information, then send the product to that

service center, with a description of the difficulty, postage and insurance

prepaid (FOB Destination). Fluke assumes no risk for damage in transit.

Following warranty repair, the product will be returned to Buyer, transportation

prepaid (FOB Destination). If Fluke determines that failure was caused by

neglect, misuse, contamination, alteration, accident, or abnormal condition of

operation or handling, including overvoltage failures caused by use outside the

product’s specified rating, or normal wear and tear of mechanical components,

Fluke will provide an estimate of repair costs and obtain authorization before

commencing the work. Following repair, the product will be returned to the

Buyer transportation prepaid and the Buyer will be billed for the repair and

return transportation charges (FOB Shipping Point).

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN

LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE

LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA,

ARISING FROM ANY CAUSE OR THEORY.

Since some countries or states do not allow limitation of the term of an implied

warranty, or exclusion or limitation of incidental or consequential damages, the

limitations and exclusions of this warranty may not apply to every buyer. If any

provision of this Warranty is held invalid or unenforceable by a court or other

decision-maker of competent jurisdiction, such holding will not affect the

validity or enforceability of any other provision.

In Case of Difficulty

For service or calibration, call your nearest authorized Fluke Service

Center.

To contact Fluke, call one of the following telephone numbers:

USA: 1-888-99-FLUKE (1-888-993-5853)

Canada: 1-800-36-FLUKE (1-800-363-5853)

Europe: +31 402-675-200

Japan: +81-3-3434-0181

Singapore: +65-738-5655

Anywhere in the world: +1-425-446-5500

Or, visit Fluke's Web site at www.fluke.com.

Fluke Corporation Fluke Europe B.V.

P.O. Box 9090 P.O Box 1186

Everett WA 98206-9090 5602 B.D. Eindhoven

USA The Netherlands

700PCK Pressure Module

Calibration Kit

Instruction Sheet

Introduction

Use this Windows software program and interface unit to

verify and calibrate Fluke 700 Series Pressure Modules for

zero and span errors at ambient temperature. You will need a

pressure calibrator or dead weight tester that is at least 4X

more accurate than the pressure module under test.

You do not use a 74x or 75x during this procedure. The PC

communicates directly with the pressure module through the

interface unit.

Safety Specifications

Designed to IEC-1010-1 Overvoltage Category II, ANSI/ISA-

S82.01-1994.

Box Contents

Box contains an interface unit with serial interface cable,

serial to USB adapter, software CD, power supply, line cord,

soft case, and instruction sheet.

Loading the Software

With Microsoft Windows running, click on the CD/DVD drive

where the CD is installed. Double click on the file 7pck.exe.

Follow the instructions to load the program onto your PC.

Connecting 700PCK to the Module

Plug the pressure module into the interface unit, connect the

interface unit power supply to line power (90 to 270V ac), and

connect the USB cable to an available USB port on your PC

as shown on the next page. Connect the pressure module to

the pressure calibrator or dead weight tester.

In the 700PCK directory, double click on 700pck.exe to start

the program. Select the desired communications port under

Com Port. Click on Connect. If the connection is not

successful, try another Com Port.

Produkt Specifikationer

Mærke:	Fluke
Kategori:	Ikke kategoriseret
Model:	700PCK

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke 700PCK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Fluke Manualer

Fluke MicroMapper Manual

25 November 2025

Fluke GFL-1500 Manual

19 November 2025

Fluke FiberLert-125 Manual

19 November 2025

Fluke 1630-2 FC Manual

25 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Savage FireMixer-14 Manual

5 December 2025

Stone Espresso Lite Manual

5 December 2025

Luna Optics LN-G2-M50 Manual

5 December 2025

Origin Effects Halcyon Blue Overdrive Manual

5 December 2025

Ferplast Twist G Manual

5 December 2025

Vevor ZY-40X12-4Black Manual

5 December 2025

Steiner Mk7 Battle Light Manual

5 December 2025

Dual VK9 Manual

5 December 2025

Crestron HZ-FP-G4 Manual

5 December 2025

Joyo R-09 Vision Dual Mod Manual

5 December 2025