Fluke 80PK-27 Manual

Fluke Ikke kategoriseret 80PK-27

Læs gratis den danske manual til Fluke 80PK-27 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Fluke 80PK-27, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

80PK-27

SureGripTM Industrial Surface

Temperature Probe

Instruction Sheet

XWWarning

To avoid electrical shock, do not use this probe

when voltages exceeding 24 V ac rms or 60 V dc

are present. The probe tip is electronically

connected to the output terminals.

XW Attention

Pour éviter les risques d’électrocution, ne pas

utiliser cette sonde quand la tension est

sepérieure à 24 V efficaces en courant alternatif

ou 60 V en courant continu. La pointe de la sonde

est reliée électriquement aux bornes de sorties.

XW Warnung

Um Elektroschock zu vermeiden, dürfen Sie den

Meßstift nicht in der Anwesenheit von

Spannungen über 24V Wechselstrom oder 60V

Gleichstrom verwenden. Die Spitze des Meßstifts

ist mit den Ausgangsanschlüssen elektrisch

verbunden.

XW Advertencia

Para evitar descargas eléctricas, no use esta

sonda cuando se apliquen voltajes que

sobrepasen 24 V ca rcm o 60 V cc. La punta de la

sonda está conectada eléctricamente a las

terminales de salida.

Introduction

The 80PK-27 SureGrip

TM Industrial Surface Temperature

Probe is designed for reliably measuring temperatures to 600

° °C (1112 F) on flat or slightly convex surfaces, while retaining

a long service life.

Specifications

Type: K (Chromel vs Alumel)

Measurement Range: -127 C °C to 600 °

(-196.6 °F to 1112 °F)

Junction Accuracy: -127 C °C to 0 °C ±4.4 °

(-196.6 °F to 32 °F ± 7.92 °F)

0 °C to 183 °C ±2.2 °C

(32 °F to 361 °F ±4.86 °F)

183 °C to 600 °C ±1.2 % of reading in °C

(361 °F to

1112 °F ± <1.2 % of reading

in °F)

Output: 25 ° ° °C (77 F) = 1.00 mV (Reference junction at 0 C)

Seebeck Coefficient: 25 °C (77 °F) = 40.50 µ °V/ C

November 2004

All product names are trademarks of their respective companies

Measurement Time (Time Constant): 1 time constant equals

330 ms; 5 time constants equal final reading. See “Application

Information” below.

Maximum Voltage Rating at Probe Tip: 24 V ac rms, or 60 V

Probe Tip: Maximum Temperature: 600 °C

(1112 °F)

Material: 303 stainless steel

Sheath Material: 303 stainless steel

Cable Length: 40 inches (1 meter)

Cable Isulation: Material: PVC

Maximum Temperature: 105 °C (220 °F)

Minimum Temperature: -20 °F

Conductors: Type: K

Size: AWG #24 stranded (7 strands of #32)

Length: 1.2 meters nominal (4 ft)

Handle: Material: Hytrel

Maximum Temperature: 65.6 °C (150 °F)

Minimum Temperature: -40 °C (-40 °F)

Connector:

Type: yellow mini-thermocouple connector with 0.792

mm (0.312 in) pin spacing

Material: Hytrel

Maximum Temperature: 125 °C (275 °F)

Dimensions:

Diameter: 22.9 mm (0.9 in)

Length: 322.6 mm (12.75 in)

Measurement Considerations

Instrument Compatibility

The 80PK-27 is designed to be compatible with any

temperature measuring instrument that accepts Type K

thermocouples, has a miniature thermocouple connector, and

has cold reference junction compensation. Accuracy of the

temperature measuring instrument must be considered along

with the 80PK-27 accuracy specifications in order to determine

the overall accuracy of the combination.

Temperature Limitations

The probe tip has continuous temperature rating of 600 °C.

However the rest of the assembly is rated for a lower

temperature. See the specifications for further information.

Media Limitations

Media must be compatible with Chromel, Alumel, and 303

stainless steel.

Application Information

At high temperatures, a surface temperature probe removes a

small amount of heat from the measured surface. At 600 °C on

a polished metal surface, the temperature at a contact point

will be lowered, typically not more than 2 °C. A lowering of the

temperature at the contact point is less likely (and contact

response time is quicker) on clean, polished, thermally

conductive surfaces than on materials with low thermal

conductivity, such as plastic or rough, contaminated surfaces.

To obtain the best thermal contact and performance, the

stainless steel ring must make full and firm contact with the

measurement surface.

Produkt Specifikationer

Mærke:	Fluke
Kategori:	Ikke kategoriseret
Model:	80PK-27
Antal pr. pakke:	1 stk
Produktfarve:	Black, Silver, Yellow
Produkttype:	Test sonde
Ledningslængde:	1 m
Materiale:	Rustfrit stål
Isoleringsmateriale:	PVC
Længde:	322.6 mm
Jævnspænding (maks.):	60 V