Fluke iFlex i1730 Manual

Fluke Ikke kategoriseret iFlex i1730

Læs gratis den danske manual til Fluke iFlex i1730 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Fluke iFlex i1730, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

iFlex-1500-xx

iFlex-3000-xx

iFlex-6000-xx

Thin-Flexi Current Probe

Safety Information

To register your product, or to view, print, or download the latest

manual or manual supplement go to our website: www.fluke.com.

A Warning identifies hazardous conditions and procedures that

are dangerous to the user.

XW Warning

To prevent possible electrical shock, fire, or personal

injury:

Read all safety information before you use the

Product.

Use the Product only as specified, or the protection

supplied by the Product can be compromised.

Comply with local and national safety codes. Use

personal protective equipment (approved rubber

gloves, face protection, and flame-resistant clothes)

to prevent shock and arc blast injury where hazardous

live conductors are exposed.

Do not use the Product around explosive gas, vapor,

or in damp or wet environments.

Do not touch voltages >30 V ac rms, 42 V ac peak, or

60 V dc.

PN 4272192 (English)

September 2013 Rev. 1, 10/21

subject to change without notice. All Product names are trademarks of

their respective companies.

Fluke Corporation

P.O. Box 9090

Everett WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

De-energize the circuit or wear personal protective

equipment in compliance with local requirements

before you apply or remove the Product.

Do not use the Product if it is damaged.

Do not use the Product if it operates incorrectly.

Before each use, examine the Product. Look for cracks

or missing pieces of the clamp housing or output cable

insulation. Also look for loose or weakened

components. Carefully examine the insulation around

the jaws.

Do not use the Flexible Current Probe if it has

damaged insulation, exposed metal, or if the wear

indicator is visible.

Do not use a current measurement as an indication

that a circuit is safe to touch. A voltage measurement

is necessary to know if a circuit is hazardous.

Have an approved technician repair the Product.

Remove the input signals before you clean the

Product.

Specifications

Safety ........................................... IEC 61010-1: Pollution degree 2

IEC 61010-2-032: CAT IV 600 V,

CAT III 1000 V

Temperature

Operating ............................... -20 °C to 70 °C (-4 °F to 158 °F)

Temperature of conductor under

test shall not exceed 80 °C (176 °F)

Storage ................................... -40 °C to 80 °C (-40 °F to 176 °F)

Altitude

Operating ...............................2000 m

Storage ................................... 12 000 m

Produkt Specifikationer

Mærke:	Fluke
Kategori:	Ikke kategoriseret
Model:	iFlex i1730

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke iFlex i1730 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Fluke Manualer

Fluke 1630-2 FC Manual

25 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Fluke SmartTrace BK120 Manual

20 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Salton MP1206 Manual

31 August 2025

TensCare Sports TENS 2 Manual

31 August 2025

Pardini K58 Manual

31 August 2025

Salton SCG-4 Manual

31 August 2025

Salton JK-1103 Manual

31 August 2025

Salton WC-2040 Manual

31 August 2025

Salton WC-2070 Manual

31 August 2025

Salton SP1963 Manual

31 August 2025

Gram EFI 8060-91 B Manual

31 August 2025

Analog Way Orchestra² Manual

31 August 2025