Fluke ITP120 Manual

Fluke Ikke kategoriseret ITP120

Læs gratis den danske manual til Fluke ITP120 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Fluke ITP120, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ITP 120

Isolated Trigger Probe

Instruction Sheet

Introduction

The ITP 120 is an optically isolated trigger probe for

isolated trigger purposes with the Fluke 120 series

ScopeMeter test tool.

Specifications

Probe Characteristics

Maximum floating voltage to ground: 600V

Maximum input voltage: 600V (with 600V Mini

Testhook)

Maximum non-destructive input voltage times

frequency: 109

Input resistance: 10 MΩ ± 1%

Input capacitance: 15 pF ± 10%

Probe length: 1.2 m (48 inch)

Trigger Characteristics

Trigger level: TTL compatible (High ≥ 2V, Low ≤ 0.8V)

Minimum pulsewidth: 7 µs

Frequency range: DC to 50 kHz

Trigger slope selectable on the ScopeMeter test tool.

Battery Type: Alkaline 9 volt, NEDA, IEC6LR61

Battery Life: 60 hour operation

June 1996, Rev. 3, 4/10

Corporation.

Printed in The Netherlands.

All product names are trademarks of their respective companies

Environmental Specifications

Meet requirements of:

• MIL-T-28800E, Type III, Class 3

• EN 50081-1, Electromagnetic Compatibility

Generic Emission Standard: EN55022 and

EN60555-2

• EN 50082-1, Electromagnetic Compatibility

Generic Immunity Standard: IEC1000-4 -2, -3, -4,

-5

This product is in conformity with Electromagnetic

Compatibility Directive 2004/108/EC, and Low Voltage

Directive 2006/95/EC.

This conformity is indicated by the symbol , i.e.

“Conformité européenne”

Temperature:

Operating: 0 °C to +50 °C (32 °F to +122 °F)

Non-operating: -40 °C to +70 °C (-40 °F to +158 °F)

Safety

Meets requirements of:

• UL 3111

• IEC1010-2-031 CAT II 600V ( Double Insulation)

Unpacking

Check that the following items are included with the ITP

120:

• Trigger Probe

• Mini Testhook (with ground lead)

• 9V Battery (installed)

Using the ITP 120

Limited Warranty &

Limitation of Liability

This Fluke product will be free from defects in material

and workmanship for one year from the date of

purchase. This warranty does not cover fuses,

disposable batteries or damage from accident, neglect,

misuse or abnormal conditions of operation or handling.

Resellers are not authorized to extend any other

warranty on Fluke’s behalf. To obtain service during the

warranty period, send your defective product to the

nearest Fluke Authorized Service Center with a

description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO

OTHER WARRANTIES, SUCH AS FITNESS FOR A

PARTICULAR PURPOSE, ARE EXPRESSED OR

IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL,

INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LOSSES, ARISING FROM ANY

CAUSE OR THEORY.

Since some states or countries do not allow the

exclusion or limitation of an implied warranty or of

incidental or consequential damages, this limitation of

liability may not apply to you.

Fluke Corporation Fluke Industrial B.V.

P.O. Box 9090 P.O. Box 90

Everett WA 98206-9090 7600 AB Almelo

USA. The Netherlands

Service Centers

To locate an authorized service center, visit us on the

World Wide Web:

http://www.fluke.com

or call Fluke using any of the phone numbers listed

below:

+1-888-993-5853 in USA and Canada

+31-40-2675200 in Europe

+1-425-446-5500 from other countries

Replacing the Battery

Connecting the ITP 120

Repairing the ITP 120

o 5(WT)

o 4(BN)

o 3(YE)

o 2(BK)

o 1(RD)

METAL SHIELD IS

GROUND

No trigger function:

A. Apply 1kHz } 0..+10V

B. Check for 1kHz } 0...+0.8V

Not OK: replace item 13.

C. Check 3 for 6μs pulses } -1.2...-2.5V

Not OK: replace item 1.

OK: check 3* for pulses } -2.5...-2.5V

OK: replace item 1.

Not OK: replace item 11.

Trigger slope error:

D. Connect ITP120 to test tool

Select +slope and check wire 1 for +1.2V

Select - slope and check wire 1 for -2.5V

OK: replace item 11. Not OK: replace item 1

ITEM ORDERING CODE DESCRIPTION

1 5322 324 00003 Optical Cable Assembly

2 5322 325 10162 Grommet

3 5322 401 11648 Cable Clamp

4 4822 290 80346 Battery Connect Cable

5 4822 138 10116 9V Alkaline Battery

6 5322 442 00162 Bottom Cover

7 5322 502 14063 Captive Screw M3x20

8 5322 454 13174 Top Text Plate

9 5322 442 00161 Top Cover

10 5322 410 10319 Slider

11 5322 216 04254 Printed Circuit Assembly

12 5322 401 11652 Cable Clamp

13 5322 210 10728 Probe Assembly

14 5322 401 11653 600V Mini Hook Clip

15 5322 454 13176 Warning Sticker

Alkaline 9 volt,

NEDA,

IEC6LR61

ITP 120

Produkt Specifikationer

Mærke:	Fluke
Kategori:	Ikke kategoriseret
Model:	ITP120

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke ITP120 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Fluke Manualer

Fluke 1630-2 FC Manual

25 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Fluke SmartTrace BK120 Manual

20 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Salton MP1206 Manual

31 August 2025

TensCare Sports TENS 2 Manual

31 August 2025

Pardini K58 Manual

31 August 2025

Salton SCG-4 Manual

31 August 2025

Salton JK-1103 Manual

31 August 2025

Salton WC-2040 Manual

31 August 2025

Salton WC-2070 Manual

31 August 2025

Salton SP1963 Manual

31 August 2025

Gram EFI 8060-91 B Manual

31 August 2025

Analog Way Orchestra² Manual

31 August 2025