Fluke OC4USB US Manual

Fluke Ikke kategoriseret OC4USB US

Læs gratis den danske manual til Fluke OC4USB US (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Fluke OC4USB US, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

OC4USB

Optical Cable for USB

Rev.II

Instruction Sheet

Specifications

Type of interface:

Optically isolated serial to USB adapter

Baud rate: 57.6 k Baud max

Logic States:

SPACE = 0, Light with wavelength 800 nm

MARK =1, No light

Handshake method:

XON/XOFF, Software handshake only

Environmental:

Meets requirements of MIL-PRF-28800F

Type III, Class 3.

Temperature, Operating:-20 °C to +55 °C

Temperature, Storage:-20 °C to +70 °C

Mechanical:

Cable length: 1.65 m

Weight: 0.1 kg

Using the Interface Cable

PC Requirements

- USB 1.1 (or higher) port on the PC.

- Windows XP/2000/Me/98 Second Edition.

Installing the OC4USB cable drivers

- Log into an account with Administrator privileges (Windows XP or Windows 2000).

- Plug the USB cable into an USB port.

- Windows will respond that it has "found new hardware", and the Windows Found/Add New

Hardware Wizard dialog will appear. Follow the instructions from the Wizard dialog.

- For automatic downloading of the latest drivers from the internet allow Windows XP or

Windows 2000 to search Microsoft Windows update when asked. To load the drivers from

CD-ROM the CD-ROM with the USB drivers (Included with cable or on FlukeView CD-

ROM) must have been inserted.

- The Hardware Wizard will install the “USB Serial Converter”/"USB to Serial Port”.

Note: for Windows XP users, you may get a dialog box warning you that this driver "has not

passed Windows Logo Testing". Just click the "Continue anyway" button.

- Additionally the “found new hardware” wizard will run again and install the USB serial port.

- The Hardware Wizard will finish, the OC4USB cable drivers have now been installed.

- Your PC may need to reboot before the OC4USB cable can be used.

Sep 2004, Rev. 1, 05/06

Printed in the EU. All product names are

trademarks of their respective companies

Determining the OC4USB Cable's COM port

- Attach the cable to the PC.

- Go to the Windows Control Panel.

- Open the "System Properties" dialog box.

- Open the Device Manager:

On Windows 2000/XP, click on the "Hardware" tab of the "System Properties" dialog box

and click on the "Device Manager" button,

On Windows 98SE/Me, click the "Device Manager" tab.

- On the "Device Manager" dialog box, look under the "Ports (COM & LPT)" tree.

- The COM port associated with the OC4USB cable is listed there, as "USB to Serial Port

(COM n)”.

Changing the COM port #

Some programs require COM 1, 2, 3 or 4 and the USB cable is often installed as COM 5 or

higher. To change the assigned COM port number, do the following:

- Open Device Manager (see above).

- On the "Device Manager" dialog box, look under the "Ports (COM & LPT)" tree.

- Double click on the “USB Serial Port”.

- Click on the "Port Settings" tab. Click on the "Advanced" button.

- Select the required COM port (NOTE: Choose one that does not say "in use" next to it).

Click "OK".

- Click "OK" again. Notice that the device will show up as being on the same COM port that it

was before (i.e., COM5), but will show up on the new port if you close the Device Manager

and open it again.

- Close the Device Manager.

Uninstalling the driver

When uninstalling the driver from Windows, it should always be done through the Add/Remove

Programs utility as this uses the driver uninstaller program to remove files and registry entries

to leave a clean system. Other methods may leave fragments of the driver that may interfere

with future installations

Limited Warranty & Limitation of Liability

This Fluke product will be free from defects in material and workmanship for one year from the

date of purchase. This warranty does not cover fuses, disposable batteries or damage from

accident, neglect, misuse or abnormal conditions of operation or handling. Resellers are not

authorized to extend any other warranty on Fluke’s behalf. To obtain service during the

warranty period, contact your nearest Fluke Authorized Service Center to obtain return

authorization information, then send the defective product to that Service Center with a

description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS

FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT

LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES

OR LOSSES, ARISING FROM ANY CAUSE OR THEORY.

Since some states or countries do not allow the exclusion or limitation of an implied warranty

or of incidental or consequential damages, this limitation of liability may not apply to you.

Fluke Corporation Fluke Industrial B.V.

P.O. Box 9090 P.O. Box 90

Everett WA 98206-9090 7600 AB Almelo

USA. The Netherlands

Service Centers

To locate an authorized service center, visit us on the World Wide Web:

http://www.fluke.com

or call Fluke using any of the phone numbers listed below:

+1-888-993-5853 in USA and Canada

+31-40-2675-200 in Europe

+1-425-446-5500 from other countries

Produkt Specifikationer

Mærke:	Fluke
Kategori:	Ikke kategoriseret
Model:	OC4USB US

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke OC4USB US stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Fluke Manualer

18 Juni 2025

14 Juni 2025

11 Marts 2025

8 Oktober 2024

8 Oktober 2024

8 Oktober 2024

8 Oktober 2024

7 Oktober 2024

4 Oktober 2024

Fluke CableAnalyzer DSX-8000 Manual

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Zoom A3 Manual

16 Juli 2025

DS18 SLG-FKP6 Manual

16 Juli 2025

CYP PU-1201-KIT Manual

16 Juli 2025

JUNG 4008 TSM Manual

16 Juli 2025

Emko SMR1P1-00-00-01-00 Manual

16 Juli 2025

DS18 Hydro NXL-X6TP Manual

16 Juli 2025

CYP PUV-1350PL-TXWP Manual

16 Juli 2025

Audio Pro VOL-1 Manual

16 Juli 2025

CYP PUV-2010TXWP Manual

16 Juli 2025

Hillvert HT-VC-400 Manual

16 Juli 2025