Fluke SureGrip 80PK-22 Manual

Fluke Ikke kategoriseret SureGrip 80PK-22

Læs gratis den danske manual til Fluke SureGrip 80PK-22 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Fluke SureGrip 80PK-22, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

80PK-22

SureGripTM Immersion

Temperature Probe

Instruction Sheet

XWWarning

To avoid electrical shock, do not use this probe

when voltages exceeding 24 V ac rms or 60 V dc

are present. The probe tip is electronically

connected to the output terminals.

Introduction

The 80PK-22 SureGripTM Immersion Temperature Probe is

designed for use in liquids or gels. The probe can also be used

as a general purpose temperature probe. The thermocouple

junction is protected from tip to handle by an Inconel sheath.

The 40-inch (1 meter) cable is terminated with a Type K

miniature thermocouple connector with 0.792-mm (0.312-in)

pin spacing. The 80PK-22 can be used with any temperature-

measuring instrument that is designed to accept Type K

thermocouples and has a miniature connector input.

Note

The 80PK-22 is not recommended for use in food or

beverage preparation. Use 80PK-25 for food

preparation.

Specifications

Type

K Standard grade Ni-Cr vs. Ni-Al (Chromel vs. Alumel)

Measurement Range

-40 °C to 1090 °C (-40 °F to 1994 °F)

Accuracy

(With respect to ANSI MC96.1-1982-Standard Limits of Error)

Note

All error calculations should be done in °C, then

scaled to °F.

Range Accuracy

(% of reading)

-40 °C to 293 °C

(-40 °F to 559.4 °F)

±2.2 °C

293 °C to 1090 °C

(559.4 °F to 1994 °F)

±0.75 %

November 2004 Rev.2, 9/09

All product names are trademarks of their respective companies.

Output

@ 25 °C (77 °F) =1.00 mV (reference junction @ 0 °C)

Seebeck Coefficient

@ 25 °C (77 °F) = 40.50 μV / °C

Measurement Time

(Time Constant): 3.0 seconds in 100 C still water at sea level °

pressure. Complete step change equals 5 time constants (3.75

seconds).

Maximum Voltage

24 V ac rms or 60 V dc

Maximum Temperature of Tip

1090 ° °C (1994 F)

Sheath

Material: Alloy 600

Dimensions:

Diameter: 3.175 mm (1/8 in)

Length: 212.725 mm (8.375 in)

Grounding

Junction welded to sheath.

Cable

Length: 40 inches (1 meter)

Insulation

Material: PVC

Maximum Temperature: 105 °C (220 °F)

Jacket Color: Gray

Conductors

Type: K

Size: AWG #24 stranded (7 strands of #32)

Handle

Material: Hytrel

Maximum Temperature: 125 °C (257 °F)

Connector

Type: Mini-thermocouple connector with .792 mm (0.312 in)

pin spacing

Material: Yellow Hytrel

Maximum Temperature: 125 °C (257 °F)

Overall Length

31.75 cm (12.5 in) from probe tip to end of cable strain relief.

Protection

Class 3. Relates solely to insulation and grounding properties

defined in IEC 348.

Produkt Specifikationer

Mærke:	Fluke
Kategori:	Ikke kategoriseret
Model:	SureGrip 80PK-22

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke SureGrip 80PK-22 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Fluke Manualer

Fluke 1630-2 FC Manual

25 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Fluke SmartTrace BK120 Manual

20 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Salton MP1206 Manual

31 August 2025

TensCare Sports TENS 2 Manual

31 August 2025

Pardini K58 Manual

31 August 2025

Salton SCG-4 Manual

31 August 2025

Salton JK-1103 Manual

31 August 2025

Salton WC-2040 Manual

31 August 2025

Salton WC-2070 Manual

31 August 2025

Salton SP1963 Manual

31 August 2025

Gram EFI 8060-91 B Manual

31 August 2025

Analog Way Orchestra² Manual

31 August 2025