Fuji Finepix F600EXR Manual
Fuji
Digital kamera
Finepix F600EXR
Læs gratis den danske manual til Fuji Finepix F600EXR (153 sider) i kategorien Digital kamera. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Fuji Finepix F600EXR, eller vil du spørge andre brugere om produktet?
Side 1/153

FINEPIX F600EXR
DIGITAL CAMERA
Owner’s Manual
Thank you for your purchase
of this product. This manual
describes how to use your
FUJIFILM digital camera and the
supplied software. Be sure that
you have read and understood
its contents and the warnings in
“For Your Safety” (P ii) before us-
ing the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
EN
Before You Begin
First Steps
Basic Photography and Playback
More on Photography
More on Playback
GPS
Movies
Connections
Menus
Technical Notes
Troubleshooting
BL01479-200
Appendix

ii
For Your Safety
For Your Safety
• Read Instructions: All the safety and operat-
ing instructions should be read before the
appliance is operated.
• Retain Instructions: The safety and operating
instructions should be retained for future
reference.
• Heed Warnings: All warnings on the ap-
pliance and in the operating instructions
should be adhered to.
• Follow Instructions: All operating and use
instructions should be followed.
Installation
Installation
Power Sources: This video product should be
operated only from the type of power source
indicated on the marking label. If you are
not sure of the type of power supply to your
home, consult your appliance dealer or local
power company. For video products intend-
ed to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization: This video product
is equipped with a polarized alternating-
current line plug (a plug having one blade
wider than the other). This plug will fi t into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug should still fail to fi t, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the po-
larized plug.
Alternate Warnings: This video product is
equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin.
This plug will only fi t into a grounding-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your obso-
lete outlet. Do not defeat the safety purpose
of the grounding type plug.
Overloading: Do not overload wall outlets and
extension cords as this can result in a risk of
fi re or electric shock.
Ventilation: Slots and openings in the cabinet
are provided for ventilation, to ensure reliable
operation of the video product and to pro-
tect it from overheating, and these openings
must not be blocked or covered. The open-
ings should never be blocked by placing the
video product on a bed, sofa, rug, or other
similar surface.
This video product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been ad-
hered to. This video product should never be
placed near or over a radiator or heat register.
Attachments: Do not use attachments not
recommended by the video product manu-
facturer as they may cause hazards.
Water and Moisture: Do not use this video
product near water—for example, near a
bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming
pool, and the like.
Power-Cord Protection: Power-supply cords
should be routed so that they are not likely
to be walked on or pinched by items placed
upon or against them, paying particular
attention to cords at plugs, convenience re-
ceptacles, and the point where they exit from
the appliance.
Accessories: Do not place this video product
on an unstable cart, stand, tripod, bracket, or
table. The video product may fall, causing
serious injury to a child or adult, and serious
damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recom-
mended by the manufacturer, or sold with
the video product. Any mounting of the ap-
pliance should follow the manufacturer’s in-
structions, and should use a mounting acces-
sory recommended by the manufacturer.
An appliance and cart
combination should
be moved with care.
Quick stops, exces-
sive force, and uneven
surfaces may cause
the appliance and cart
combination to overturn.
IMPORTANT SAFETY INSTRUCTIONS

iii
For Your Safety
Antennas
Antennas
Outdoor Antenna Grounding: If an outside
antenna or cable system is connected to the
video product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-
up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides
information with respect to proper ground-
ing of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connec-
tion to grounding electrodes, and require-
ments for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Antenna Lead
in Wire
Ground Clamp
Grounding
Conductors
(NEC SECTION
810-21)
Power Service Grounding
Electrode System (NEC ART
250. PART H)
Antenna
Discharge Unit
(NEC SECTION
810-20)
Electric Service
Equipment
Ground Clamps
Power Lines: An outside antenna system
should not be located in the vicinity of over-
head power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might
be fatal.
Use
Use
Cleaning: Unplug this video product from the
wall outlet before cleaning. Do not use liq-
uid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
Object and Liquid Entry: Never push objects
of any kind into this video product through
openings as they may touch dangerous volt-
age points or short out parts that could result
in a fi re or electric shock. Never spill liquid of
any kind on the video product.
Lightning: For added protection for this video
product receiver during a lightning storm, or
when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the vid-
eo product due to lightning and power-line
surges.
Service
Service
Servicing: Do not attempt to service this video
product yourself as opening or removing cov-
ers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualifi ed
service personnel.
Damage Requiring Service: Unplug this video
product from the wall outlet and refer servic-
ing to qualifi ed service personnel under the
following conditions:
• When the power-supply cord or plug is
damaged.
• If liquid has been spilled, or objects have
fallen into the video product.
• If the video product has been exposed to
rain or water.
• If the video product has been dropped or
the cabinet has been damaged.
If the video product does not operate nor-
mally follow the operating instructions. Ad-
just only those controls that are covered by
the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualifi ed technician to restore the video
product to its normal operation.
When the video product exhibits a distinct
change in performance—this indicates a
need for service.
Replacement Parts: When replacement parts
are required, be sure the service technician
has used replacement parts specifi ed by the
manufacturer or have the same characteris-
tics as the original part. Unauthorized sub-
stitutions may result in fi re, electric shock or
other hazards.
Safety Check: Upon completion of any service
or repairs to this video product, ask the ser-
vice technician to perform safety checks to
determine that the video product is in proper
operating condition.

v
For Your Safety
WARNING
WARNING
Do not use the charger to charge batteries other than those speci ed
here. The supplied battery charger is for use only with the type
of battery supplied with the camera. Using the charger to charge
conventional batteries or other types of rechargeable batteries
can cause the battery to leak fl uid, overheat or burst.
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
When carrying the battery, install it in a digital camera or keep it
in the hard case. When storing the battery, keep it in the hard case.
When discarding, cover the battery terminals with insulation tape.
Contact with other metallic objects or batteries could cause
the battery to ignite or burst.
Keep memory cards out of the reach of small children. Because
memory cards are small, they can be swallowed by children.
Be sure to store memory cards out of the reach of small chil-
dren. If a child swallows a memory card, seek medical atten-
tion or call an emergency number.
CAUTION
CAUTION
Do not use this camera in locations a ected by oil fumes, steam, hu-
midity or dust. This can cause a fi re or electric shock.
Do not leave this camera in places subject to extremely high temper-
atures. Do not leave the camera in locations such as a sealed
vehicle or in direct sunlight. This can cause a fi re.
Keep out of the reach of small children. This product could cause
injury in the hands of a child.
Do not place heavy objects on the camera. This can cause the
heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connect-
ed. Do not pull on the connection cord to disconnect the AC power
adapter. This can damage the power cord or cables and cause
a fi re or electric shock.
Do not use the AC power adapter when the plug is damaged or the
plug socket connection is loose. This could cause a fi re or electric
shock.
Do not cover or wrap the camera or the AC power adapter in a cloth
or blanket. This can cause heat to build up and distort the cas-
ing or cause a fi re.
CAUTION
CAUTION
When you are cleaning the camera or you do not plan to use the
camera for an extended period, remove the battery and disconnect
and unplug the AC power adapter. Failure to do so can cause a
fi re or electric shock.
Unplug from
power socket
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause
a fi re.
Using a ash too close to a person’s eyes may temporarily a ect the
eyesight. Take particular care when photographing infants and
young children.
When a memory card is removed, the card could come out of the slot
too quickly. Use your nger to hold it and gently release the card.
Injury could result to those struck by the ejected card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fi re or electric
shock. Contact your FUJIFILM dealer to request internal clean-
ing every two years. Please note that this service is not free
of charge.
Remove your ngers from the ash window before the ash res.
Failure to observe this precaution could result in burns.
Keep the ash window clean and do not use the ash if the window
is obstructed. Failure to observe these precautions could cause
smoke or discoloration.

vi
For Your Safety
The Battery and Power Supply
Note: Check the type of battery used in
your camera and read the appropriate
sections.
The following describes the proper use of
batteries and how to prolong their life. Incor-
rect use can shorten battery life or cause leak-
age, overheating, fi re, or explosion.
Li-ion Batteries
Li-ion Batteries
Read this section if your camera uses a
rechargeable Li-ion battery.
The battery is not charged at shipment.
Charge the battery before use. Keep the bat-
tery in its case when not in use.
■Notes on the Battery
The battery gradually loses its charge when
not in use. Charge the battery one or two
days before use.
Battery life can be extended by turning the
camera off when not in use.
Battery capacity decreases at low tempera-
tures; a depleted battery may not function at
when cold. Keep a fully charged spare battery
in a warm place and exchange as necessary,
or keep the battery in your pocket or other
warm place and insert it in the camera only
when shooting. Do not place the battery in
direct contact with hand warmers or other
heating devices.
■ Charging the Battery
Charge the battery in the supplied battery
charger. Charging times will increase at am-
bient temperatures below +10 °C (+50 °F) or
above +35 °C (+95 °F). Do not attempt to
charge the battery at temperatures above
40 °C (+104 °F); at temperatures below 0 °C
(+32 °F), the battery will not charge.
Do not attempt to recharge a fully charged
battery. The battery does not however need
to be fully discharged before charging.
The battery may be warm to the touch imme-
diately after charging or use. This is normal.
■Battery Life
At normal temperatures, the battery can be
recharged about 300 times. A noticeable de-
crease in the length of time the battery will
hold a charge indicates that it has reached
the end of its service life and should be re-
placed.
■Storage
Performance may be impaired if the battery is
left unused for extended periods when fully
charged. Run the battery fl at before storing it.
If the camera will not be used for an extended
period, remove the battery and store it in a
dry place with an ambient temperature of
from +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to extremes of
temperature.
■Cautions: Handling the Battery
• Do not transport or store with metal objects
such as necklaces or hairpins.
• Do not expose to fl ame or heat.
• Do not disassemble or modify.
• Use with designated chargers only.
• Do not drop or subject to strong physical
shocks.
• Do not expose to water.
• Keep the terminals clean.
• The battery and camera body may become
warm to the touch after extended use. This
is normal.
AA Alkaline/Rechargeable Ni-MH Batteries
AA Alkaline/Rechargeable Ni-MH Batteries
Read this section if your camera uses AA
alkaline or rechargeable AA Ni-MH bat-
teries. Information on compatible battery
types may be found elsewhere in the camera
manual.
■Cautions: Handling the Batteries
• Do not expose to water, fl ame, or heat, or
store in warm or humid conditions.
• Do not transport or store with metal objects
such as necklaces or hairpins.
• Do not disassemble or modify the batteries
or battery casing.
• Do not subject to strong physical shocks.
• Do not use batteries that are leaking, de-
formed, or discolored.
• Keep out of reach of infants and small chil-
dren.
• Insert in the correct orientation.

vii
For Your Safety
• Do not mix old and new batteries, batteries
with diff erent charge levels, or batteries of
diff erent types.
• If the camera will not be used for an ex-
tended period, remove the batteries. Note
that the camera clock will be reset.
• The batteries may be warm to the touch im-
mediately after use. Turn the camera off and
allow the batteries to cool before handling.
• Battery capacity tends to decrease at low
temperatures. Keep spare batteries in a
pocket or other warm place and exchange
as necessary. Cold batteries may recover
some of their charge when warmed.
• Fingerprints and other stains on the battery
terminals can impair battery performance.
Thoroughly clean the terminals with a
soft, dry cloth before inserting them in the
camera.
If the batteries leak, clean the battery
compartment thoroughly before in-
serting new batteries.
If fl uid from the battery comes into
contact with skin or clothing, fl ush
the aff ected area with water. If uid
enters your eyes, immediately ush the
a ected area with water and seek
medical attention. Do not rub your eyes.
Failure to observe this precaution could
result in permanent visual impairment.
■Ni-MH Batteries
The capacity of Ni-MH batteries may be
temporarily reduced when new, after long
periods of disuse, or if they are repeatedly
recharged before being fully discharged. This
is normal and does not indicate a malfunc-
tion. Capacity can be increased by repeatedly
discharging the batteries using the discharge
option in the camera setup menu and re-
charging them using a battery charger.
QCAUTION: Do not use the discharge option
with alkaline batteries.
The camera draws a small amount of current
even when off . Ni-MH batteries that have
been left in the camera for an extended pe-
riod may be drawn down to the point that
they no longer hold a charge. Battery perfor-
mance may also drop if the batteries are run
down in a device such as a fl ashlight. Use the
discharge option in the camera setup menu
to discharge Ni-MH batteries. Batteries that
no longer hold a charge even after repeat-
edly being discharged and recharged have
reached the end of their service life and must
be replaced.
Ni-MH batteries can be recharged in a battery
charger (sold separately). Batteries may be-
come warm to the touch after charging. Refer
to the instructions provided with the charger
for more information. Use the charger with
compatible batteries only.
Ni-MH batteries gradually lose their charge
when not in use.
■Disposal
Dispose of used batteries in accord with local
regulations.
AC Power Adapters (Available Separately)
AC Power Adapters (Available Separately)
This section applies to all camera models.
Use only FUJIFILM AC power adapters desig-
nated for use with this camera. Other adapt-
ers could damage the camera.
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected
to the camera.
• Turn the camera off before disconnecting
the adapter. Disconnect the adapter by the
plug, not the cable.
• Do not use with other devices.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the
touch during use. This is normal.
• If the adapter causes radio interference,
reorient or relocate the receiving antenna.

viii
For Your Safety
Using the Camera
Do not aim the camera at extremely bright
light sources, such as the sun in a cloudless
sky. Failure to observe this precaution could
damage the camera image sensor.
Take Test Shots
Take Test Shots
Before taking photographs on important
occasions (such as at weddings or before
taking the camera on a trip), take a test shot
and view the result in the LCD monitor to en-
sure that the camera is functioning normally.
FUJIFILM Corporation can not accept liability
for damages or lost profi ts incurred as a result
of product malfunction.
Notes on Copyright
Notes on Copyright
Unless intended solely for personal use, imag-
es recorded using your digital camera system
cannot be used in ways that infringe copy-
right laws without the consent of the owner.
Note that some restrictions apply to the
photographing of stage performances, enter-
tainments, and exhibits, even when intended
purely for personal use. Users are also asked
to note that the transfer of memory cards
containing images or data protected under
copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Handling
Handling
To ensure that images are recorded correctly,
do not subject the camera to impact or physi-
cal shocks while images are being recorded.
Liquid Crystal
Liquid Crystal
In the event that the LCD monitor is damaged,
care should be taken to avoid contact with liq-
uid crystal. Take the urgent action indicated
should any of the following situations arise:
• If liquid crystal comes in contact with your
skin, clean the area with a cloth and then
wash thoroughly with soap and running
water.
• If liquid crystal enters your eyes, fl ush the af-
fected eye with clean water for at least 15
minutes and then seek medical assistance.
• If liquid crystal is swallowed, rinse your
mouth thoroughly with water. Drink large
quantities of water and induce vomiting,
then seek medical assistance.
Although the display is manufactured using
extremely high-precision technology, it may
contain pixels that are always lit or that do not
light. This is not a malfunction, and images re-
corded with the product are unaff ected.
Trademark Information
Trademark Information
xD-Picture Card and E are trademarks
of FUJIFILM Corporation. The typefaces in-
cluded herein are solely developed by Dyna-
Comware Taiwan Inc. Macintosh, QuickTime,
and Mac OS are trademarks of Apple Inc. in
the U.S.A. and other countries. Windows 7,
Windows Vista, and the Windows logo are
trademarks of the Microsoft group of com-
panies. Adobe and Adobe Reader are either
trademarks or registered trademarks of Ado-
be Systems Incorporated in the U.S.A. and/or
other countries. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo
is a trademark. YouTube is a trademark of
Google Inc. All other trade names mentioned
in this manual are the trademarks or regis-
tered trademarks of their respective owners.
Electrical Interference
Electrical Interference
This camera may interfere with hospital or
aviation equipment. Consult with hospital
or airline staff before using the camera in a
hospital or on an aircraft.
Color Television Systems
Color Television Systems
NTSC (National Television System Committee)
is a color television telecasting specifi cation
adopted mainly in the U.S.A., Canada, and
Japan. PAL (Phases Alternation by Line) is
a color television system adopted mainly in
European countries and China.
Exif Print (Exif Version 2.3)
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera fi le
format in which information stored with pho-
tographs is used for optimal color reproduc-
tion during printing.
IMPORTANT NOTICE:
Read Before Using the Software
Direct or indirect export, in whole or in part,
of licensed software without the permission
of the applicable governing bodies is pro-
hibited.

ix
For Your Safety
IMPORTANT: Read this section before using the toponyms includ-
ed in this product.
Toponym Data License Agreement
Personal Use Only. You agree to use this Data together with this digital
camera for the solely personal, non-commercial purposes for which
you were licensed, and not for service bureau, time-sharing or other
similar purposes. Accordingly, but subject to the restrictions set forth
in the following paragraphs, you may copy this Data only as necessary
for your personal use to (i) view it, and (ii) save it, provided that you do
not remove any copyright notices that appear and do not modify the
Data in any way. You agree not to otherwise reproduce, copy, modify,
decompile, disassemble or reverse engineer any portion of this Data,
and may not transfer or distribute it in any form, for any purpose, ex-
cept to the extent permitted by mandatory laws. Multi-disc sets may
only be transferred or sold as a complete set as provided by FUJIFILM
Corporation and not as a subset thereof.
Restrictions. Except where you have been specifi cally licensed to do
so by FUJIFILM Corporation, and without limiting the preceding para-
graph, you may not (a) use this Data with any products, systems, or
applications installed or otherwise connected to or in communication
with vehicles, capable of vehicle navigation, positioning, dispatch, real
time route guidance, fl eet management or similar applications; or (b)
with or in communication with any positioning devices or any mo-
bile or wireless-connected electronic or computer devices, including
without limitation cellular phones, palmtop and handheld computers,
pagers, and personal digital assistants or PDAs.
Warning. The Data may contain inaccurate or incomplete information
due to the passage of time, changing circumstances, sources used
and the nature of collecting comprehensive geographic data, any of
which may lead to incorrect results.
No Warranty. This Data is provided to you “as is,” and you agree to use
it at your own risk. FUJIFILM Corporation and its licensors (and their
licensors and suppliers) make no guarantees, representations or war-
ranties of any kind, express or implied, arising by law or otherwise,
including but not limited to, content, quality, accuracy, completeness,
eff ectiveness, reliability, fi tness for a particular purpose, usefulness,
use or results to be obtained from this Data, or that the Data or server
will be uninterrupted or error-free.
Disclaimer of Warranty: FUJIFILM Corporation AND ITS LICENSORS
(INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY
WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE,
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-
INFRINGEMENT. Some States, Territories and Countries do not allow
certain warranty exclusions, so to that extent the above exclusion may
not apply to you.
Disclaimer of Liability: FUJIFILM Corporation AND ITS LICENSORS (IN-
CLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO
YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE
OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION
ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT,
WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFOR-
MATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR
SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR
INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMA-
TION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER
IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY,
EVEN IF FUJIFILM Corporation OR ITS LICENSORS HAVE BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. Some States, Territories and
Countries do not allow certain liability exclusions or damages limita-
tions, so to that extent the above may not apply to you.
Export Control. You agree not to export from anywhere any part of the
Data provided to you or any direct product thereof except in compli-
ance with, and with all licenses and approvals required under, appli-
cable export laws, rules and regulations.
Entire Agreement. These terms and conditions constitute the entire
agreement between FUJIFILM Corporation (and its licensors, includ-
ing their licensors and suppliers) and you pertaining to the subject
matter hereof, and supersedes in their entirety any and all written or
oral agreements previously existing between us with respect to such
subject matter.

x
For Your Safety
Governing Law. The above terms and conditions shall be governed by
the laws of the State of Illinois, Netherlands, without giving eff ect to
(i)its confl ict of laws provisions, or (ii)the United Nations Convention
for Contracts for the International Sale of Goods, which is explicitly ex-
cluded. You agree to submit to the jurisdiction of the State of Illinois,
The Netherlands for any and all disputes, claims and actions arising
from or in connection with the Data provided to you hereunder.
Geodetics. The geodetic system used by this device to record latitude
and longitude is WGS 84.
Copyright. The map data included in this device are protected under
copyright law and except for personal use may not be employed
without the permission of the copyright holder.
Navigation. This device can not be used for purposes of navigation.
Licensed Software Copyright Holders
© 2010 NAVTEQ All rights reserved.
This service uses POI (Points Of Inter-
est) of ZENRIN CO., LTD. “POWERED BY
ZENRIN” is a trademark of ZENRIN CO.,
LTD. © 2010 ZENRIN CO., LTD. All rights
reserved.
© Her Majesty the Queen in Right of Canada, © Queen’s Printer for
Ontario, © Canada Post Corporation, GeoBase®, © Department of
Natural Resources Canada, ZIP+4®, © United States Postal Service®
2010. the USPS®.
Australia Copyright. Based on data provided under
license from PSMA Australia Limited
(www.psma.com.au).
Austria “© Bundesamt für Eich- und Vermes-
sungswesen”
Croatia, Cyprus,
Estonia, Latvia,
Lithuania, Moldova,
Poland, Slovenia and/
or Ukraine
“© EuroGeographics”
France The following notice must appear on all
copies of the Data, and may also appear
on packaging: “source: © IGN France – BD
TOPO®”
Germany “Die Grundlagendaten wurden mit
Genehmigung der zuständigen Behörden
entnommen” or “Die Grundlagendaten
wurden mit Genehmigung der zustaendi-
gen Behoerden entnommen.”
Great Britain “Based upon Crown Copyright material.”
Greece “Copyright Geomatics Ltd.”
Hungary “Copyright © 2003; Top-Map Ltd.”
Italy “La Banca Dati Italiana è stata prodotta
usando quale riferimento anche cartografi a
numerica ed al tratto prodotta e fornita
dalla Regione Toscana.”
Norway “Copyright © 2000; Norwegian Mapping
Authority”
Portugal “Source: IgeoE – Portugal”
Spain “Información geográfi ca propiedad del
CNIG”
Sweden “Based upon electronic data Ó National
Land Survey Sweden.”
Switzerland “Topografi sche Grundlage: Ó Bundesamt für
Landestopographie.”

xii
About This Manual
About This Manual
Before using the camera, read this manual and the warnings in “For Your Safe-
ty” (P ii). For information on speci c topics, consult the sources below.
Table of Contents
Table of Contents
...........................
...........................
P
P
xiv
xiv
Troubleshooting
Troubleshooting
..........................
..........................
P
P
115
115
The “Table of Contents” gives an over-
view of the entire manual. The princi-
pal camera operations are listed here.
Having a speci c problem with the
camera? Find the answer here.
Warning Messages and Displays
Warning Messages and Displays
...
...
P
P
121
121
Find out what’s behind that ashing
icon or error message in the display.
Memory Cards
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and
SDXC memory cards (P 12), referred to in this manual as “memory cards.”
Temperature Warning
Temperature Warning
The camera will turn o automatically before its temperature or the temperature
of the battery rise above safe limits. Pictures taken when a temperature warning is
displayed may exhibit higher levels of “noise” (mottling). Turn the camera o and wait
for it to cool before turning it on again.

xiii
■■ Deleting Pictures Deleting Pictures
y To delete a picture,
display it full frame and
press the selector up (b).
■■ Silent Mode Silent Mode
y Press and hold the DISP/
BACK button to disable
camera lights and
sounds.
Frequently-Used Buttons
Frequently-Used Buttons
■■Taking Pictures During PlaybackTaking Pictures During Playback
y To return instantly to shooting mode,
press the shutter button halfway.
View
Shoot
■■Turning the Camera on in Playback ModeTurning the Camera on in Playback Mode
y When the camera is
o , playback can be
started by pressing the
a button for about a
second.

xiv
Table of Contents
Table of Contents
For Your Safety ..................................................................ii
IMPORTANT SAFETY INSTRUCTIONS ..................................ii
Safety Notes ....................................................................iv
About This Manual ..........................................................xii
Frequently-Used Buttons ..............................................xiii
Before You Begin
Before You Begin
Symbols and Conventions .................................................1
Supplied Accessories .........................................................1
Parts of the Camera ..........................................................2
Camera Displays ...............................................................4
Shooting ........................................................................4
Playback .........................................................................5
First Steps
First Steps
Charging the Battery ........................................................7
Inserting the Battery and a Memory Card .......................9
Compatible Memory Cards .............................................12
Turning the Camera on and O ......................................14
Shooting Mode ..............................................................14
Playback Mode ...............................................................14
Basic Setup ......................................................................16
Basic Photography and Playback
Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode.............17
Viewing Pictures .............................................................21
More on Photography
More on Photography
Shooting Mode ................................................................22
O (E AUTO/E Priority) .................23
R (E AUTO) .................................................23
E Priority ..........................................................24
Adv. ADVANCED ..........................................................25
r MOTION PANORAMA 360.......................................25
i PRO FOCUS ...........................................................28
j PRO LOW-LIGHT ....................................................29
SP SCENE POSITION.......................................................30
M MANUAL ...................................................................32
A APERTURE PRIORITY AE ..............................................32
S SHUTTER PRIORITY AE ................................................33
P PROGRAM AE ..............................................................33
Focus Lock ........................................................................34

xv
Table of Contents
d Exposure Compensation ..........................................36
F Macro Mode (Close-ups) ...........................................37
N Using the Flash (Super-Intelligent Flash) .................38
h Using the Self-Timer .................................................40
b Intelligent Face Detection .......................................41
R Continuous Shooting ...............................................42
ITOP n .....................................................................42
PBEST FRAME CAPTURE ...........................................43
OAE BKT ..................................................................44
XFILM SIMULATION BKT ............................................45
YDYNAMIC RANGE BKT .............................................45
n Face Recognition ......................................................46
Adding New Faces ..........................................................46
Viewing, Editing, and Deleting Existing Data .................48
Adding Faces Automatically ...........................................48
More on Playback
More on Playback
Playback Options .............................................................50
Continuous Shooting ......................................................50
I Favorites: Rating Pictures .........................................50
Playback Zoom ...............................................................51
Multi-Frame Playback ....................................................52
A Deleting Pictures ......................................................53
b Image Search............................................................54
m PhotoBook Assist .....................................................55
Creating a PhotoBook.....................................................55
Viewing Photobooks ......................................................56
Editing and Deleting Photobooks ...................................56
Viewing Panoramas ........................................................57
Viewing Photo Information ............................................58
GPS
GPS
Recording GPS Data with Pictures .................................59
GPS Tracking ....................................................................61
Viewing GPS Data ............................................................62
Photo Navigation ...........................................................62
Copying GPS Data to Other Images .................................63
RLandmark Navigator ................................................64

xvi
Table of Contents
Movies
Movies
Recording Movies ............................................................66
Movie Frame Size ...........................................................67
Viewing Movies ...............................................................68
Connections
Connections
Viewing Pictures on TV ...................................................69
Printing Pictures via USB ................................................71
Printing the DPOF Print Order.........................................73
Viewing Pictures on a Computer ....................................75
Windows: Installing MyFinePix Studio ...........................75
Macintosh: Installing FinePixViewer...............................78
Connecting the Camera ..................................................80
Menus
Menus
Using the Menus: Shooting Mode ..................................83
Using the F-Mode Menu .............................................83
F-Mode Menu Options ................................................83
NISO........................................................................83
OIMAGE SIZE ............................................................84
RCONTINUOUS .........................................................85
RSET-UP ..................................................................85
ZADVANCED ANTI BLUR ............................................85
PFILM SIMULATION ..................................................85
Using the Shooting Menu...............................................86
Shooting Menu Options .................................................86
AE MODE ....................................................86
A Adv. MODE ............................................................86
A SCENE POSITION .....................................................86
N ISO........................................................................86
O IMAGE SIZE ............................................................86
T IMAGE QUALITY .....................................................86
U DYNAMIC RANGE ...................................................87
P FILM SIMULATION ..................................................87
D WHITE BALANCE ....................................................88
yINTELLIGENT SHARPNESS ........................................89
RCONTINUOUS .........................................................89
RMY LANDMARK REGISTER .......................................89
ZADVANCED ANTI BLUR ............................................89
b FACE DETECTION ....................................................89
C PHOTOMETRY ........................................................90
F AF MODE ...............................................................90
n FACE RECOGNITION .................................................91
FMOVIE AF MODE ....................................................91
W MOVIE MODE .........................................................91
J AE BKT EV STEPS ....................................................91

xvii
Table of Contents
Using the Menus: Playback Mode ..................................92
Using the F-Mode Menu .............................................92
F-Mode Menu Options ................................................92
m PHOTOBOOK ASSIST ................................................92
RLANDMARK NAVIGATOR ..........................................92
R PHOTO NAVIGATION ................................................92
RSET-UP ..................................................................93
I SLIDE SHOW ..........................................................93
Using the Playback Menu ...............................................94
Playback Menu Options ..................................................94
m PHOTOBOOK ASSIST ................................................94
RLANDMARK NAVIGATOR ..........................................94
RLOCATION INFO COPY ..............................................94
R PHOTO NAVIGATION ................................................94
b IMAGE SEARCH ......................................................94
A ERASE ...................................................................94
j MARK FOR UPLOAD TO ............................................95
I SLIDE SHOW ..........................................................96
B RED EYE REMOVAL .................................................96
D PROTECT ................................................................96
G CROP.....................................................................97
O RESIZE ...................................................................97
C IMAGE ROTATE .......................................................98
E COPY .....................................................................98
F VOICE MEMO .........................................................99
i ERASE FACE RECOG. ................................................99
K PRINT ORDER (DPOF) ..............................................99
J DISP ASPECT ........................................................100
The Setup Menu ............................................................101
Using the Setup Menu ..................................................101
Setup Menu Options ....................................................102
F DATE/TIME ..........................................................102
N TIME DIFFERENCE .................................................102
Q a ....................................................102
o SILENT MODE .......................................................102
R RESET ..................................................................103
K FORMAT ..............................................................103
RSET-UP ................................................................103
A IMAGE DISP. .........................................................104
B FRAME NO. ..........................................................104
G OPERATION VOL....................................................105
H SHUTTER VOLUME ................................................105
e SHUTTER SOUND ..................................................105
I PLAYBACK VOLUME ..............................................105
J LCD BRIGHTNESS ..................................................105
N AUTO POWER OFF ................................................105
L DUAL IS MODE .....................................................106
B RED EYE REMOVAL ...............................................106
R INTELLIGENT DIGITAL ZOOM ..................................107
C AF ILLUMINATOR ..................................................107
j RAW ...................................................................108
t SAVE ORG IMAGE .................................................108
m AUTOROTATE PB ...................................................108
O BACKGROUND COLOR ............................................108
c GUIDANCE DISPLAY ..............................................108
Q VIDEO SYSTEM .....................................................109
x POWER MANAGEMENT .........................................109
S WATERPROOF CASE ..............................................110
RDEMONSTRATION .................................................110

xviii
Table of Contents
Technical Notes
Technical Notes
Optional Accessories .....................................................111
Accessories from FUJIFILM............................................112
Caring for the Camera ...................................................113
Storage and Use ...........................................................113
Cleaning .......................................................................114
Traveling ......................................................................114
Troubleshooting
Troubleshooting
Problems and Solutions ................................................115
Warning Messages and Displays ..................................121
Appendix
Appendix
Internal Memory/Memory Card Capacity ....................125
Speci cations ................................................................126

2Before You Begin
Parts of the Camera
Parts of the Camera
For more information, refer to the page listed to the right of each item.
Selector button
Move cursor up
d (exposure compensation) button (P 36)
b (delete) button (P xiii) MENU/OK button
Move cursor right
N ( ash) button (P 38)
Move cursor left
F (macro) button (P 37)
Command dial Move cursor down
h (self-timer) button (P 40)

3Before You Begin
Parts of the Camera
1 Shutter button .............................................................. 19
2 ON/OFF button ............................................................. 14
3 Built-in GPS antenna .................................................... 59
4 Flash ............................................................................. 38
5 Flash pop-up button ..................................................... 38
6 Lens and lens cover
7 AF-assist illuminator ................................................... 107
Self-timer lamp ............................................................ 40
8 Microphone (R) .......................................................66, 99
9 Microphone (L) ........................................................ 66, 99
10 Zoom control ...........................................................18, 51
11 LCD monitor .................................................................... 4
12 a (playback) button .................................................. 21
13 Indicator lamp (see below)
14 Mode dial...................................................................... 22
15 Strap eyelet .................................................................... 1
16 F (movie recording) button ....................................... 66
17 Terminal cover ...................................................69, 71, 80
18 DC coupler cable cover ................................................ 112
19 F (photo mode) button .........................................83, 92
20 DISP (display)/BACK button .....................................6, 16
o (silent mode) button* .............................................xiii
21 Battery-chamber cover ................................................... 9
22 Tripod mount
23 Speaker ....................................................................68, 99
24 USB multi-connector .........................................69, 71, 80
25 Connector for HDMI cable ............................................. 70
26 Battery latch ..............................................................9, 11
27 Battery chamber ............................................................. 9
28 Memory card slot .......................................................... 10
* Press and hold the DISP/BACK button until o is displayed.
The Indicator Lamp
The Indicator Lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Indicator lamp
Camera status
Camera status
Glows green
Glows green Focus locked.
Blinks green
Blinks green Blur, focus, or exposure warning. Picture can be taken.
Blinks green and orange
Blinks green and orange Recording pictures. Additional pictures can be taken.
Glows orange
Glows orange Recording pictures. No additional pictures can be taken at this time.
Blinks orange
Blinks orange Flash charging; ash will not re when picture is taken.
Blinks red
Blinks red Lens or memory error.

4Before You Begin
Parts of the Camera
Camera Displays
Camera Displays
The following types of indicator may be displayed during shooting and play-
back. Indicators vary with camera settings.
■Shooting
F
10: 00
AM
10: 00
AM
9
250
250
F
3.5
F
3.5
P
800
2
2
3
3
-
1
-
1
12 / 31 / 2050
12 / 31 / 2050
11 Sensitivity ..................................................................... 83
12 Image size/quality ...................................................84, 86
13 Dynamic range ............................................................. 87
14 Film simulation ............................................................. 85
15 White balance ............................................................... 88
16 Battery level ................................................................... 5
17 Dual IS mode .............................................................. 106
18 GPS signal strength....................................................... 59
19 Exposure compensation ................................................ 36
20 Aperture
21 Shutter speed
22 Date and time ............................................................... 16
23 Blur warning ..........................................................39, 121
24 Focus frame .................................................................. 34
25 Intelligent sharpness .................................................... 89
26 Waterproof case .......................................................... 110
27 Self-timer indicator ...................................................... 40
28 Macro (close-up) mode ................................................. 37
29 Flash mode ................................................................... 38
1 Shooting mode ............................................................. 22
2 Intelligent Face Detection indicator .............................. 41
3 Metering ....................................................................... 90
4 Continuous shooting mode ........................................... 42
5 Silent mode indicator ..............................................3, 102
6 Focus warning .......................................................19, 121
7 Internal memory indicator *
8 Temperature warning ................................................. 121
9 Movie mode .................................................................. 67
10 Number of available frames ........................................ 125
* a: indicates that no memory card is inserted and that pictures will be stored in the camera’s internal memory (P 10).

5Before You Begin
Parts of the Camera
■Playback
100-0001
100-0001
400
400
12 / 31 / 2050
12 / 31 / 2050
10: 00
AM
10: 00
AM
2
2
-
1
-
1
1 / 250
1/250
F
3.5
F
3.5
3
3
4:3
4:3
F
F
YouTube
5 Motion panorama z ................................................. 57
6 Gift image ..................................................................... 50
7 Frame number ............................................................ 104
8 Dynamic range ............................................................. 87
9 E mode .............................................................. 23
10 GPS data ....................................................................... 62
11 Portrait enhancer .......................................................... 30
12 Mark for upload to ........................................................ 95
13 Photobook assist........................................................... 55
14 Voice memo indicator ................................................... 99
15 DPOF print indicator ..................................................... 73
16 Protected image ........................................................... 96
17 Favorites ....................................................................... 50
1 Playback mode indicator..........................................21, 50
2 Intelligent Face Detection indicator .........................41, 96
3 Red-eye removal indicator ............................................ 96
4 Pro focus mode, pro low-light mode ........................28, 29
Battery Level
Battery Level
Battery level is shown as follows:
Indicator
Indicator
Description
Description
D (white) Battery partially discharged.
C (white) Battery more than half discharged.
B (red) Low battery. Charge as soon as possible.
A (blinks red) Battery exhausted. Turn camera o and charge battery.

6Before You Begin
Parts of the Camera
Hiding and Viewing Indicators
Hiding and Viewing Indicators
Press DISP/BACK to cycle through shooting and playback indicators as follows:
• Shooting:
Indicators displayed/indicators hidden/best framing/HD framing/histogram
• Playback:
Indicators displayed/indicators hidden/I favorites (P 50)/photo info (P 58)

8 First Steps
Charging the Battery
3
Charge the battery.
Remove the battery when charging is complete. See the speci cations
(P 130) for charging times (note that charging times increase at low tem-
peratures).
QUnplug the charger when it is not in use.

9 First Steps
Inserting the Battery and a Memory Card
Inserting the Battery and a Memory Card
Although the camera can store pictures in internal memory, optional SD,
SDHC, and SDXC memory cards (sold separately) can be used to store addi-
tional pictures. After charging the battery, insert the battery and memory card
as described below.
1
Open the battery-chamber cover.
RBe sure the camera is o before opening
the battery-chamber cover.
QDo not open the battery-chamber cover
when the camera is on. Failure to ob-
serve this precaution could result in dam-
age to image les or memory cards.
QDo not use excessive force when handling the battery-chamber cover.
2 Insert the battery.
Align the orange stripe on the battery with the orange
battery latch and slide the battery into the camera,
keeping the battery latch pressed to one side. Con rm
that the battery is securely latched.
QInsert the battery in the correct orientation. Do NOT use
force or attempt to insert the battery upside down or back-
wards. The battery will slide in easily in the correct orien-
tation.
Orange stripe
Battery latch

10 First Steps
Inserting the Battery and a Memory Card
3 Insert the memory card.
Holding the memory card in the orientation shown at
right, slide it in until it clicks into place at the back of
the slot.
Q Be sure card is in the correct orientation; do not insert at
an angle or use force. If the memory card is not correctly
inserted or no memory card is inserted, a will appear in
the LCD monitor and internal memory will be used for re-
cording and playback.
Click
Q SD/SDHC/SDXC memory cards can be locked, making
it impossible to format the card or to record or delete
images. Before inserting an SD/SDHC/SDXC memory
card, slide the write-protect switch to the unlocked
position. Write-protect switch
4 Close the battery-chamber cover.

11 First Steps
Inserting the Battery and a Memory Card
R
R
Using an AC Power Adapter
Using an AC Power Adapter
• The camera can be powered by an optional AC power adapter and DC coupler (sold
separately). See the manuals provided with the AC power adapter and DC coupler
for details.
• Depending on the country or region of sale, a demo mode slide show may start if
the camera is turned on while powered by an AC power adapter. Press the shutter
button to end the show.
Removing the Battery and Memory Card
Removing the Battery and Memory Card
Before removing the battery or memory card, turn the camera o and open the
battery-chamber cover.
To remove the battery, press the battery latch to the side, and
slide the battery out of the camera as shown.
Battery latch
To remove the memory card, press it in and release it slowly.
The card can then be removed by hand. When a memory card
is removed, the card could come out of the slot too quickly. Use
your nger to hold it and gently release the card.

12 First Steps
Inserting the Battery and a Memory Card
■ Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been ap-
proved for use in the camera. A complete list of approved memory cards is
available at http://www.fujifilm.com/support/digital_cameras/compatibility/.
Operation is not guaranteed with other cards. The camera can not be used
with xD-Picture Cards or MultiMediaCard (MMC) devices.
Q
Q
Memory Cards
Memory Cards
• Do not turn the camera o or remove the memory card while the memory card is
being formatted or data are being recorded to or deleted from the card. Failure to
observe this precaution could damage the card.
• Format SD/SDHC/SDXC memory cards before rst use, and be sure to reformat all
memory cards after using them in a computer or other device. For more information
on formatting memory cards, see “K FORMAT” (P 103).
• Memory cards are small and can be swallowed; keep out of reach of children. If a
child swallows a memory card, seek medical assistance immediately.
• miniSD or microSD adapters that are larger or smaller than the standard dimensions
of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take
the camera to an authorized service representative. Do not forcibly remove the card.
• Do not a x labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory
card. Use a G card or better when shooting HD or high-speed movies.

13 First Steps
Inserting the Battery and a Memory Card
• The data in internal memory may be erased or corrupted when the camera is re-
paired. Please note that the repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in
which pictures are stored. Do not rename or delete this folder or use a computer or
other device to edit, delete, or rename image les. Always use the camera to delete
pictures from memory cards and internal memory; before editing or renaming les,
copy them to a computer and edit or rename the copies, not the originals.
Q
Q
Batteries
Batteries
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this
precaution could prevent the battery from charging.
• Do not a x stickers or other objects to the battery. Failure to observe this precaution
could make it impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery could overheat.
• Read the cautions in “The Battery and Power Supply” (P vi).
• Use only battery chargers designated for use with the battery. Failure to observe this
precaution could result in product malfunction.
• Do not remove the labels from the battery or attempt to split or peel the outer casing.
• The battery gradually loses its charge when not in use. Charge the battery one or
two days before use.

14 First Steps
Turning the Camera on and O
Turning the Camera on and O
Shooting Mode
Shooting Mode
Press the ON/OFF button to turn the
camera on. The lens will extend au-
tomatically.
Press ON/OFF again to turn the camera
o .
R
R
Switching to Playback Mode
Switching to Playback Mode
Press the a button to start playback.
Press the shutter button halfway to return
to shooting mode.
Playback Mode
Playback Mode
To turn the camera on and begin
playback, press the a button for
about a second.
Press the a button again or press
the ON/OFF button to turn the camera
o .
R
R
Switching to Shooting Mode
Switching to Shooting Mode
To exit to shooting mode, press the shut-
ter button halfway. Press the a button
to return to playback.

15 First Steps
Turning the Camera on and O
QForcibly obstructing the lens could cause damage or product malfunction.
QFingerprints and other marks on the lens can a ect pictures. Keep the lens clean.
QThe ON/OFF button does not completely end the supply of power to the camera.
R
R
Auto Power O
Auto Power O
The camera will turn o automatically if no operations are performed for the length of
time selected for N AUTO POWER OFF (P 105).

16 First Steps
Basic Setup
Basic Setup
A language-selection dialog is displayed the rst time the camera is turned
on. Set up the camera as described below (you can reset the clock or change
languages at any time using the F DATE/TIME or Q a options in
the setup menu; for information on displaying the setup menu, see page 102).
1
Highlight a language and press MENU/OK.
R Press DISP/BACK to skip the current step. Any steps you skip
will be displayed the next time the camera is turned on.
START MENU
SET NO
ENGLISH
DEUTSCH
PORTUGUÊS
FRANCAIS
ESPAÑOL
2
The date and time will be displayed. Press the selector
left or right to highlight the year, month, day, hour, or
minute and press up or down to change. To change the
order in which the year, month, and day are displayed,
highlight the date format and press the selector up or
down. Press MENU/OK when settings are complete.
3
Power management options will be displayed. Press the selector up or
down to highlight one of the following options and then press MENU/OK:
• n POWER SAVE: Save battery power.
• o CLEAR DISPLAY: Choose for a brighter, higher quality display.
R
R
The Camera Clock
The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the
language-selection dialog will be displayed when the camera is turned on.
NOSET
DATE/TIME NOT SET
2013
2012
2010
2009
1. 1 12
:
00
AM
2011
YY. MM. DD

17
Basic Photography and Playback
Basic Photography and Playback
Taking Pictures in
Taking Pictures in
R
R
(
(
E
E
AUTO
AUTO
) Mode
) Mode
This section describes how to take pictures in R (E AUTO) mode.
1
Select O mode.
Turn the camera on and rotate the mode dial to O. The R display
will appear in the LCD monitor.
The
The
o
o
Icon
Icon
In R mode, the camera continuously adjusts focus and searches for faces, in-
creasing the drain on the battery. o is displayed in the LCD monitor.
Scene Icon (
Scene Icon (
P
P
23)
23)
The camera automatically selects the appropriate scene.
RThe camera analyses the scene and selects the preferred E mode when
the shutter button is pressed halfway (P 24).
RTo raise the ash when lighting is poor, press the ash pop-up button (P 38).

18 Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode
2 Frame the picture.
Use the zoom control to frame the picture in the display.
Zoom indicator
Zoom out Zoom in
Holding the Camera
Holding the Camera
Hold the camera steady with both hands and brace your
elbows against your sides. Shaking or unsteady hands can
blur your shots.
To prevent pictures that are out of focus or too dark (under-
exposed), keep your ngers and other objects away from
the lens and ash.

19Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode
3 Focus.
Press the shutter button halfway to focus.
RThe lens may make a noise when the camera focuses;
this is normal. If the subject is poorly lit, the AF-assist
illuminator may light; see “C AF ILLUMINATOR” ( P 107)
for information on disabling the illuminator.
Double
beep
If the camera is able to focus, it will beep twice and the indicator lamp will
glow green.
If the camera is unable to focus, the focus frame will turn red, s will be dis-
played, and the indicator lamp will blink green. Change the composition
or use focus lock (P 34).

21Basic Photography and Playback
Viewing Pictures
Viewing Pictures
Pictures can be viewed in the LCD monitor. When taking important photo-
graphs, take a test shot and check the results.
1
Press the a button.
The most recent picture will be displayed.
2
View additional pictures.
Press the selector right to view pictures in the order
recorded, left to view pictures in reverse order.
Press the shutter button to exit to shooting mode.

22
More on Photography
More on Photography
Shooting Mode
Shooting Mode
Choose a shooting mode according to the scene or type
of subject. To select a shooting mode, align the mode
icon with the mark next to the mode dial.
O: Improve clarity, reduce
noise, increase dynamic range,
or let the camera automatically
adjust settings to suit the scene
(P 23).
SP (SCENE POSITION): Choose a
scene suited to the subject or
shooting conditions and let the
camera do the rest (P 30).
Adv. (ADVANCED): Sophisticated techniques made easy
(P 25).
B (AUTO): A simple “point-and-
shoot” mode recommended for
rst-time users of digital cameras.
M, A, S, P: Select for full control over camera settings
(P 32), including aperture (M and A) and/or shutter speed
(M and S).

23More on Photography
Shooting Mode
O
O
(
(
E
E
AUTO/
AUTO/
E
E
Priority)
Priority)
Optimize settings for your current subject or improve clarity, reduce
noise, or enhance dynamic range. Rotate the mode dial to O
and choose one of the following E modes in the shooting
menu.
■R (E AUTO)
The camera automatically selects the scene and E
mode according to shooting conditions (P 17).
R If S is selected for O IMAGE SIZE in R mode, the camera
will automatically select the optimal image size.
RR INTELLIGENT DIGITAL ZOOM is restricted to 2× (P 107).
The Scene Icon
Scene icon
The camera selects from the following scenes:
Scene
Scene
Main subject
Main subject
AUTO
AUTO
LAND-
LAND-
SCAPE
SCAPE
NIGHT
NIGHT
MACRO
MACRO
BEACH
BEACH
SUNSET
SUNSET
SNOW
SNOW
SKY
SKY
GREENERY
GREENERY
SKY &
SKY &
GREENERY
GREENERY
Non-portrait
Non-portrait
a
a
c
c
d
d
*
*
e
e
u
u
v
v
w
w
x
x
y
y
z
z
Portrait
Portrait
Normal
Normal
d
d
d
d
c
c
d
d
d
d
*
*
—
—
d
d
u
u
d
d
v
v
d
d
w
w
d
d
x
x
d
d
y
y
d
d
z
z
Backlit
Backlit
g
g
gc
gc
—
—
—
—
gu
gu
gv
gv
gw
gw
gx
gx
gy
gy
gz
gz
Moving object
Moving object
c
c
c
c
c
c
c
c
d
d
c
c
e
e
c
c
u
u
c
c
v
v
c
c
w
w
c
c
x
x
c
c
y
y
c
c
z
z
Portrait and
Portrait and
motion
motion
Normal
Normal
a
a
a
a
c
c
a
a
d
d
—
—
a
a
u
u
a
a
v
v
a
a
w
w
a
a
x
x
a
a
y
y
a
a
z
z
Backlit
Backlit
b
b
b
b
c
c
—
—
—
—
b
b
u
u
b
b
v
v
b
b
w
w
b
b
x
x
b
b
y
y
b
b
z
z
* If n is displayed, the camera will take a series of shots (advanced anti-blur; P 24).
QThe mode selected may vary with shooting conditions. If the mode and subject do not match,
select B mode (P 22) or choose SP (P 30) and select a scene manually.

24 More on Photography
Shooting Mode
Advanced Anti Blur
Advanced Anti Blur
When n is displayed, the camera will take a series of exposures and combine them
to form a single image, reducing “noise” (mottling) and blur.
Rn is available when ON is selected in the shooting menu (P 85) and the ash
(P 38) is o or set to auto.
QSome time may be required to combine the exposures into a single image. A
single combined image may not be created if the subject or camera moves dur-
ing shooting. Keep the camera steady during shooting and do not move the
camera until shooting is complete.
QFrame coverage is reduced.
The EXR Icon
When the shutter button is pressed halfway, the camera chooses the pre-
ferred E mode:
• S (RESOLUTION PRIORITY): Produces crisp, clear shots.
• T (HIGH ISO & LOW NOISE): Reduces noise in pictures taken at high sensitivities.
• U (D-RANGE PRIORITY): Increases the amount of detail visible in highlights.
■E Priority
Select this mode to manually choose from the following E modes:
• S (RESOLUTION PRIORITY): Choose for crisp, clear shots.
• T (HIGH ISO & LOW NOISE): Reduce noise in pictures taken at high sensitivities.
• U (D-RANGE PRIORITY): Increase the amount of detail visible in highlights.
U DYNAMIC RANGE (P 87) can be set to Z (1600%) and Y (800%).

26 More on Photography
Shooting Mode
4
Pan the camera in the direction shown by the arrow.
Shooting ends automatically when the progress bar is
full and the panorama is complete.
RShooting ends if the shutter button is pressed all the way
down during shooting. No panorama will be recorded if
the shutter button is pressed before the camera has been
panned through 120 °.
120
Progress bar
QPanoramas are created from multiple frames. The camera may in some cases record
an greater or lesser angle than selected or be unable to stitch the frames together
perfectly. The last part of the panorama may not be recorded if shooting ends be-
fore the panorama is complete.
QShooting may be interrupted if the camera is panned too quickly or too slowly. Pan-
ning the camera in a direction other than that shown cancels shooting.
QThe desired results may not be achieved with moving subjects, subjects close to
the camera, unvarying subjects such as the sky or a eld of grass, subjects that are
in constant motion, such as waves and waterfalls, or subjects that undergo marked
changes in brightness. Panoramas may be blurred if the subject is poorly lit.

27More on Photography
Shooting Mode
z
z
Choose z for seamless 360° panoramas that can be played back in a loop (P57).
RThe
t
t
SAVE ORG IMAGE
SAVE ORG IMAGE option in the setup menu can be used to record a v
panorama in addition to a seamless z panorama (P 108).
QDepending on the subject and shooting conditions, the camera may produce
distorted results or a v panorama. The top and bottom of the area visible in
the shooting display are cropped out and white strips may appear at the top and
bottom of the display.
For Best Results
For Best Results
For best results, move the camera in a small circle at a steady speed, keeping the
camera horizontal and being careful only to pan in the direction shown by the
guides. If the desired results are not achieved, try panning at a di erent speed.

28 More on Photography
Shooting Mode
■ i PRO FOCUS
The camera takes up to three shots each time the shutter
button is pressed, softening the background to emphasize
the main subject. The amount of softening can be adjusted
before shooting by pressing the selector left or right. Use
for portraits or photos of owers similar to those produced
by SLR cameras.
RSoftening can not be applied to background objects that are too close to the main
subject. If a message stating that the camera can not create the e ect is displayed
when the camera focuses, try backing away from your subject and zooming in. The
camera may also be unable to soften the background if the subject is moving; if
prompted, check the results and try again.

29More on Photography
Shooting Mode
■ j PRO LOW-LIGHT
Each time the shutter button is pressed, the camera makes
four exposures and combines them into a single photo-
graph. Use to reduce noise and blur when photographing
poorly lit subjects or static subjects at high zoom ratios.
RA single combined photograph may not be created with some
scenes or if the subject or camera moves during shooting. Do not move the camera
until shooting is complete.
PRO FOCUS/PRO LOW-LIGHT
PRO FOCUS/PRO LOW-LIGHT
To save unprocessed copies of pictures taken in these modes, select ON for the
t SAVE ORG IMAGE option in the setup menu (P 108).
QKeep the camera steady during shooting.
QFrame coverage is reduced.
QThe camera may make fewer than four exposures in some situations.

30 More on Photography
Shooting Mode
SP
SP
SCENE POSITION
SCENE POSITION
The camera o ers a choice of “scenes,” each adapted to particular
shooting conditions or a speci c type of subject. Use the A SCENE
POSITION option in the shooting menu to choose the scene as-
signed to the SP position on the mode dial.
Scene
Scene
Description
Description
C
C
NATURAL &
NATURAL &
N
NThe camera takes two shots: one without the ash and one with.
D
D
NATURAL LIGHT
NATURAL LIGHT Capture natural lighting under low-light conditions.
h
h
PORTRAIT
PORTRAIT Choose for portraits.
Z
Z
PORTRAIT
PORTRAIT
ENHANCER
ENHANCER Choose for a smooth skin e ect when shooting portraits.
l
l
DOG
DOG Choose when photographing dogs.
m
m
CAT
CAT Choose when photographing cats.
M
M
LANDSCAPE
LANDSCAPE Choose for daylight shots of buildings and landscapes.
N
N
SPORT
SPORT Choose when photographing moving subjects.
O
O
NIGHT
NIGHT Choose this mode for poorly lit twilight or night scenes.
H
H
NIGHT (TRIPOD)
NIGHT (TRIPOD) Choose this mode for slow shutter speeds when shooting at night.
p
p
FIREWORKS
FIREWORKS Slow shutter speeds are used to capture the expanding burst of light from
a rework.
Q
Q
SUNSET
SUNSET Choose this mode to record the vivid colors in sunrises and sunsets.
R
R
SNOW
SNOW Choose for crisp, clear shots that capture the brightness of scenes dominat-
ed by shining white snow.
s
s
BEACH
BEACH Choose for crisp, clear shots that capture the brightness of sunlit beaches.

31More on Photography
Shooting Mode
Scene
Scene
Description
Description
f
f
UNDERWATER
UNDERWATER Choose for when using an optional waterproof case to take photographs
underwater.
U
U
PARTY
PARTY Capture indoor background lighting under low-light conditions.
V
V
FLOWER
FLOWER Choose for vivid close-ups of owers.
W
W
TEXT
TEXT Take clear pictures of text or drawings in print.
l
l
DOG/
DOG/
m
m
CAT
CAT
The camera focuses on the faces of dogs or cats that are facing the camera, and the
self-timer menu o ers a n AUTO RELEASE option that releases the shutter auto-
matically when a pet is detected (P 40). During playback, image search (P 54) can be
used to search for pictures taken in either mode.
RAlthough camera can detect many di erent breeds of dogs and cats, results may
vary with the breed and shooting conditions. The camera may fail to detect pets
with dark-colored faces or long hair covering their entire face. If a dog or cat is not
detected, the camera focuses on the subject at the center of the frame.

32 More on Photography
Shooting Mode
M
M
MANUAL
MANUAL
In this mode, you control both shutter speed and aperture.
Press the selector up (d) to highlight shutter speed or
aperture and use the command dial to adjust the high-
lighted item. If desired, exposure can be altered from the
value selected by the camera.
SETTING SHUTTER SPEED
1000
F
3.5
The Exposure Indicator
The Exposure Indicator
The amount the picture will be under- or over-exposed at cur-
rent settings is shown by the exposure indicator.
SETTING SHUTTER SPEED
1000
F
3.5
A
A
APERTURE PRIORITY AE
APERTURE PRIORITY AE
You choose the aperture using the command dial, while the camera
adjusts shutter speed for optimal exposure.
QIf the correct exposure can not be achieved at the selected
aperture, shutter speed will be displayed in red. Adjust aper-
ture until the correct exposure is achieved. If the subject is
outside the metering range of the camera, the shutter speed
display will show “---”. Press the shutter button halfway to
measure exposure again.
F3.5

33More on Photography
Shooting Mode
S
S
SHUTTER PRIORITY AE
SHUTTER PRIORITY AE
You choose the shutter speed using the command dial, while the
camera adjusts aperture for optimal exposure.
QIf the correct exposure can not be achieved at the selected
shutter speed, aperture will be displayed in red. Adjust shut-
ter speed until the correct exposure is achieved. If the subject
is outside the metering range of the camera, the aperture
display will show “F ---”. Press the shutter button halfway to
measure exposure again.
1000
P
P
PROGRAM AE
PROGRAM AE
The camera sets exposure automatically.
QIf the subject is outside the metering range of the camera, the shutter speed and
aperture displays will show “---”. Press the shutter button halfway to measure expo-
sure again.

34 More on Photography
Focus Lock
Focus Lock
To compose photographs with o -center subjects:
1
Focus:
Position the subject in the focus frame ( )
and press the shutter button halfway to lock focus
and exposure. Focus and exposure will remain locked
while the shutter button is pressed halfway (AF/AE
lock).
2
Recompose: Keep the button pressed halfway.
3
Shoot: Press the button all the way down.

35More on Photography
Focus Lock
Autofocus
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to
focus on the subjects listed below. If the camera is unable to focus, focus on another
subject at the same distance and use focus lock to recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
• Subjects photographed through a window or other re-
ective object.
• Dark subjects and subjects that absorb rather than re ect
light, such as hair or fur.
• Insubstantial subjects, such as smoke or ame.
• Subjects that show little contrast with the background
(for example, subjects in clothing that is the same color
as the background).
• Subjects positioned in front of or behind a high-contrast
object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly con-
trasting elements).

36 More on Photography
d
d
Exposure Compensation
Exposure Compensation
To adjust exposure compensation when photographing
very bright, very dark, or high-contrast subjects, press
the selector up (d). Press the selector up or down or
use the command dial to choose an exposure compen-
sation value and then press MENU/OK.
Choose positive (+) values
to increase exposure
Choose negative (–) values
to reduce exposure
RA d icon and exposure indicator are displayed at settings other than ±0. Exposure
compensation is not reset when the camera is turned o ; to restore normal expo-
sure control, choose a value of ±0.
RTurn the ash o when using exposure compensation.

37More on Photography
F
F
Macro Mode (Close-ups)
Macro Mode (Close-ups)
For close-ups, press the selector left (F) and select F.
When macro mode is in e ect, the camera focuses on
subjects near the center of the frame. Use the zoom
control to compose pictures (P 18).
To exit macro mode, press the selector left (F) and select
OFF.
MACRO
OFF
P
Close-up shots
RUse of a tripod is recommended to prevent blur caused by camera shake.
RThe shadow cast by the lens may appear in photographs taken with the ash at
very short ranges. Zoom out or increase the distance to the subject.

38 More on Photography
N
N
Using the Flash (Super-Intelligent Flash)
Using the Flash (Super-Intelligent Flash)
When the ash is used, the camera’s Super-Intelligent Flash system instantly
analyzes the scene based on such factors as the brightness of the subject,
its position in the frame, and its distance from the camera. Flash output and
sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the e ects of ambient background lighting, even in dimly-lit
indoor scenes. Use the ash when lighting is poor, for example when shoot-
ing at night or indoors under low light.
1
Press the ash pop-up button to raise the ash.
RIf playback is in progress, return to shooting mode be-
fore raising the ash.

39More on Photography
N Using the Flash (Super-Intelligent Flash)
2
Press the selector right (N) and choose from the fol-
lowing ash modes:
Option
Option
Description
Description
AUTO
AUTO
/
/
K
K* The ash res when required. Recommended in most
situations.
N
N
/
/
L
L*
The ash res whenever a picture is taken. Use for back-
lit subjects or for natural coloration when shooting in
bright light.
O
O
/
/
M
M*
Capture both the main subject and the background
under low light (note that brightly lit scenes may be
overexposed).
P
P
Flash o . Use where ash photography is prohibited or
to capture natural dim natural lighting. A tripod can be
used to prevent blurring when lighting is poor.
RThe ash also turns o when lowered.
AUTO FLASH
According to
shooting conditions
P
* J
icon indicates that Intelligent Face Detection and red-eye removal are on and will be used
to minimize “red-eye” caused by the ash re ecting from the retinas of portrait subjects.
RThe ash is automatically lowered when the camera is turned o .
R If the ash will re, p will be displayed when the shutter button is pressed halfway.
At slow shutter speeds, k will appear in the display to warn that pictures may be
blurred; use of a tripod is recommended.
RThe ash may re several times with each shot. Do not move the camera until
shooting is complete.
RThe ash may cause vignetting.

40 More on Photography
h
h
Using the Self-Timer
Using the Self-Timer
To use the self-timer, press the selector down (h) and
choose from the following options:
OFF
OFF
P
Option
Option
Description
Description
T (OFF) Self-timer o .
o ( AUTO RELEASE)The shutter is released automatically when the camera detects a human portrait
subject facing the camera. Use for portraits of babies.
S (10 SEC)
The shutter is released ten seconds after the shutter button is pressed. Use for
self-portraits. The self-timer lamp on the front of the camera lights when the
timer starts and begins to blink shortly before the photo is taken.
R (2 SEC)
The shutter is released two seconds after the shutter button is pressed. Use to
reduce blur caused by the camera moving when the shutter button is pressed.
The self-timer lamp will blink as the timer counts down.

41More on Photography
b
b
Intelligent Face Detection
Intelligent Face Detection
Intelligent Face Detection sets focus and exposure for human faces anywhere
in the frame, preventing the camera from focusing on the background in
group portraits. Choose for shots that emphasize portrait subjects.
To use Intelligent Face Detection, press MENU/OK to dis-
play the shooting menu and select ON for b FACE
DETECTION. Faces can be detected with the camera
in vertical or horizontal orientation; if a face is detected,
it will be indicated by a green border. If there is more
than one face in the frame, the camera will select the
face closest to the center; other faces are indicated by
white borders.
QIn some modes, the camera may set exposure for the frame as a whole rather than
the portrait subject.
QIf the subject moves as the shutter button is pressed, their face may not be in the
area indicated by the green border when the picture is taken.

43More on Photography
R Continuous Shooting
■ PBEST FRAME CAPTURE
The camera takes a series of pictures, starting before and ending after the
shutter button is pressed.
1
Choose the frame rate as described in Steps 1–2 on the previous page.
QSome frame rates may reduce the number of shots available.
2
Highlight the number of shots and press the selector
right. Press the selector up or down to choose the num-
ber of shots in each burst and left or right to choose
their distribution (the number on the left is taken before
and the number on the right after the shutter button
is pressed). Press MENU/OK when settings are complete
and press DISP/BACK to return to shooting mode.
Shots per burst
CONTINUOUS SHOOTING SETUP
SET CANCEL
FRAMES8
SHUTTER 16
Distribution

44 More on Photography
R Continuous Shooting
3
Take photographs. The camera begins recording while the shutter button
is pressed halfway, and completes the burst when the shutter button is
pressed all the way down. The illustration shows a burst of eight shots,
three before the shutter button is pressed and four after.
Shutter button
pressed halfway
Shutter button pressed all
the way down
“Before” shots “After” shots
QIf the shutter button is pressed all the way down before the number of frames
selected for the “before” portion is recorded, the remaining frames will be taken
after the shutter button is pressed all the way down.
QIf the shutter button is pressed halfway for an extended period, the camera may
record the burst before the shutter button is pressed all the way down.
■ OAE BKT
Each time the shutter button is pressed, the camera takes three shots: one us-
ing the metered value for exposure, the second overexposed by the amount
selected for JAE BKT EV STEPS in the shooting menu (P 91), and the third
underexposed by the same amount (the camera may not be able to use the
selected bracketing increment if the amount of over- or under- exposure ex-
ceeds the limits of the exposure metering system).

45More on Photography
R Continuous Shooting
■ XFILM SIMULATION BKT
Each time the shutter button is pressed, the camera takes one shot and pro-
cesses it to create three copies with di erent PFILM SIMULATION settings
(P 85): cPROVIA/STANDARD for the rst, dVelvia/VIVID for the second,
and eASTIA/SOFT for the third.
■ YDYNAMIC RANGE BKT
Each time the shutter button is pressed, the camera takes three shots at di er-
ent UDYNAMIC RANGE settings (P 87): V 100% for the rst, W 200% for
the second, and X 400% for the third (NISO can not exceed 3200; values
less than 400 are not available when O is selected for OIMAGE SIZE).
j
RAW
RAW
The number of pictures that can be recorded in a single burst varies with the option
selected for jRAW in the setup menu.
j
RAW
RAW
R
CONTINUOUS
CONTINUOUS
RAW+JPEG
RAW+JPEG
RAW
RAW
OFF (JPEG)
OFF (JPEG)
ITOP n
Up to 6
Up to 6
Up to 6
Up to 6
Up to 32
Up to 32
PBEST FRAME CAPTURE
Up to 6
Up to 6
Up to 6
Up to 6
Up to 16
Up to 16
OAE BKT
3
3
3
3
3
3
XFILM SIMULATION BKT
—
—
—
—
3
3
YDYNAMIC RANGE BKT
—
—
—
—
3
3

46 More on Photography
n
n
Face Recognition
Face Recognition
The camera can store information on the face and personal
details (name, relationship, and birth date) of portrait sub-
jects and assign these subjects priority for Intelligent Face
Detection or display their names and other information
during playback.
Happy Birthday!
Adding New Faces
Adding New Faces
Follow the steps below to add faces to the face recognition database.
1
Select REGISTER.
Select REGISTER for n FACE RECOGNITION in the shooting menu.
RTo disable face recognition, select OFF.
2
Take a photograph.
After checking that the subject is facing the camera,
frame the subject using the guides and take the pho-
tograph.
RIf an error is displayed, take the photograph again.
CANCEL
REGISTER FACE
CAPTURE THE FACE
ALONG WITH THE GUIDLINE

47More on Photography
n Face Recognition
3 Enter face recognition data
Press MENU/OK to display face recognition data and enter the following in-
formation:
• NAME: Enter a name of up to 14 characters and press MENU/OK.
• BIRTHDAY: Enter the subject’s date of birth and press MENU/OK.
• CATEGORY: Choose the option that describes your relationship to the sub-
ject and press MENU/OK.
RIf you attempt to zoom in on the face of a person indicated by a green border
in the face recognition database on their birthday, the camera will display their
name and the message “Happy Birthday!”

49More on Photography
n Face Recognition
Face Recognition
Face Recognition
The camera can store up to eight faces. If you attempt to add a ninth face, a con r-
mation dialog will be displayed; use VIEW & EDIT to make room for new faces by
deleting existing data. AUTO REGISTRATION is disabled if there are already data for
eight faces.
When Intelligent Face Detection (P 41) is on and the frame contains multiple subjects
from the face recognition database, the camera displays the name of the subject
that will be used to set focus and exposure (the subject shown by the green frame).
If no name is entered, the camera will show “---”. Subjects identi ed using face rec-
ognition but not used to set focus and exposure are shown by orange frames, other
subjects by white frames.
QThe camera may fail to identify subjects in the face recognition database if they
are not facing the camera or are only partly in the frame, or if details of the sub-
jects’ faces or expressions di er markedly from those in the database.

50
More on Playback
More on Playback
Playback Options
Playback Options
To view the most recent picture in the LCD monitor, press the a button.
100-0001
100-0001
Press the selector right to view pictures in the order recorded, left to view
pictures in reverse order. Keep the selector pressed to scroll rapidly to the
desired frame.
R Pictures taken using other cameras are indicated by a m (“gift image”) icon during
playback.
Continuous Shooting
Continuous Shooting
In the case of pictures taken in continuous shooting mode, only the rst frame
of each series will be displayed. Press the selector down to view the other
pictures in the series.
I
I
Favorites: Rating Pictures
Favorites: Rating Pictures
To rate the picture currently displayed in full-frame playback, press DISP/BACK
and press the selector up and down to select from zero to ve stars.

51More on Playback
Playback Options
Playback Zoom
Playback Zoom
Select i to zoom in on pictures displayed in single-frame playback; select
j to zoom out. When the picture is zoomed in, the selector can be used to
view areas of the image not currently visible in the display.
Navigation window shows
portion of image currently
displayed in LCD monitor
Zoom indicator
Press DISP/BACK to exit zoom.
RThe maximum zoom ratio varies with image size. Playback zoom is not available
with cropped or resized copies saved at a size of a or smaller.

52 More on Playback
Playback Options
Multi-Frame Playback
Multi-Frame Playback
Selecting j when a picture is shown full-frame in the LCD monitor displays
the current image with previous and following images in the background.
Select j to increase the number of images displayed to two, nine, or one
hundred, i to view fewer images.
100-0001
100-0001
When two or more images are displayed, use the selector to highlight images
and press MENU/OK to view the highlighted image full frame. In the nine- and
hundred-frame displays, use the selector to view more pictures.

53More on Playback
A
A
Deleting Pictures
Deleting Pictures
To delete individual pictures, multiple selected
pictures, or all pictures, press MENU/OK, select
A ERASE (P 94), and choose from the options
below. Note that deleted pictures can not be re-
covered. Copy important pictures to a computer or other storage device before
proceeding.
Option
Option
Description
Description
FRAME
FRAME Press the selector left or right to scroll through pictures and press MENU/OK to delete
the current picture (a con rmation dialog is not displayed).
SELECTED
SELECTED
FRAMES
FRAMES
Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks
or print orders are shown by S). When the operation is complete, press DISP/BACK
to display a con rmation dialog, then highlight OK and press MENU/OK to delete the
selected pictures.
ALL FRAMES
ALL FRAMES
A con rmation dialog will be displayed; highlight OK and press MENU/OK to delete all
unprotected pictures (if a memory card is inserted, only the pictures on the memory
card will be a ected; the pictures in internal memory are only deleted if no memory
card is inserted). Pressing DISP/BACK cancels deletion; note that any pictures deleted
before the button was pressed can not be recovered.
RProtected pictures can not be deleted. Remove protection from any pictures you
wish to delete (P 96).
RIf a message appears stating that the selected images are part of a DPOF print order,
press MENU/OK to delete the pictures.
PLAYBACK MENU
ERASE
OFF
FRAME
SELECTED FRAMES
ALL FRAMES
BACK

54 More on Playback
b
b
Image Search
Image Search
Search for pictures.
1
Select b IMAGE SEARCH in the playback menu (P 94), highlight one of
the following search criteria, and press MENU/OK:
• BY DATE: Search by date.
• BY GPS LOCATION NAME: Search by location name (location names that do
not begin with a letter from A to Z are listed in the search conditions
under “#”).
• BY FACE: Search for faces from the face recognition database.
• BY I FAVORITES: Search by rating.
• BY SCENE: Search by scene.
• BY TYPE OF DATA: Find all still pictures or all movies.
• BY UPLOAD MARK: Find all pictures selected for upload to a speci ed desti-
nation.
2
Select a search condition. Only pictures that match the search condition
will be displayed. To delete or protect selected pictures or to view the
search results in a slide show, press MENU/OK and choose A ERASE (P 94),
D PROTECT (P 96), or I SLIDE SHOW (P 93).

55More on Playback
m
m
PhotoBook Assist
PhotoBook Assist
Create books from your favorite photos.
Creating a PhotoBook
Creating a PhotoBook
1
Select NEW BOOK for m PHOTOBOOK ASSIST in the playback menu
(P 92) and choose from the following options:
• SELECT FROM ALL: Choose from all available pictures.
• SELECT BY IMAGE SEARCH: Choose from pictures matching selected search
conditions (P 54).
RNeither photographs a or smaller nor movies can be selected for photobooks.
2
Scroll through the images and press the selector up to select or deselect.
To display the current image on the cover, press the selector down. Press
MENU/OK to exit when the book is complete.
RThe rst picture selected becomes the cover image. Press the selector down to
select a di erent image for the cover.
3
Select COMPLETE PHOTOBOOK (to select all photos or all photos match-
ing the speci ed search conditions for the book, choose SELECT ALL). The
new book will be added to the list in the photobook assist menu.
QBooks can contain up to 300 pictures.
QBooks that contain no photos are automatically deleted.

56 More on Playback
m PhotoBook Assist
Viewing Photobooks
Viewing Photobooks
Highlight a book in the photobook assist menu and press MENU/OK to display
the book, then press the selector left or right to scroll through the pictures.
Editing and Deleting Photobooks
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options will be dis-
played; select the desired option and follow the on-screen instructions.
• EDIT: Edit the book as described in “Creating a PhotoBook” (P 55).
• ERASE: Delete the book.
Photobooks
Photobooks
Photobooks can be copied to a computer using the supplied MyFinePix Studio soft-
ware.

58 More on Playback
Viewing Photo Information
Viewing Photo Information
Photo information can be viewed by pressing DISP/BACK to cycle through indi-
cators (P 6) until the following display appears:
:
:
:
:OFF
ISO
400
1/250
F
4.5
23
-
1
12/31/2050 10 :00
AM
100-0001
4:3
N
STD
qDynamic range wImage size and quality
eSensitivity rShutter speed/aperture
tFilm simulation yFlash mode uWhite balance
iExposure compensation oFrame number
!0Picture (overexposed areas blink on and o )
!1Histogram
Histograms
Histograms
Histograms show the distribution of tones in the im-
age. Brightness is shown by the horizontal axis, the
number of pixels by the vertical axis.
Pixel brightness
No. of
pixels
Shadows Highlights
Optimal exposure: Pixels are distributed in an even
curve throughout the tone range.
Overexposed: Pixels are clustered on the right side of
the graph.
Underexposed: Pixels are clustered on the left side of
the graph.

59
GPS
GPS
Recording GPS Data with Pictures
Recording GPS Data with Pictures
To record GPS data with new pictures, press the F but-
ton and select one of the following options for RSET-
UP> LOCATION SEARCH in the F-mode menu (P 85).
• PERMANENTLY ON: The camera continues to update GPS data even when
turned o . The camera will be quicker to display GPS data when turned on,
but the drain on the battery will increase.
• WHEN SWITCHED ON: The camera updates GPS data only when on. The camera
may need some time to acquire GPS data when turned on. This option is
selected automatically at battery levels of B and below.
RGPS works best outdoors under clear skies.
During shooting, GPS data are displayed in the monitor as
shown at right. Signal strength is indicated by the number
of bars; O is displayed when the camera is searching for a
signal, Q if the camera is in GPS demo mode, and P if no
signal is detected. The current location is shown by a place
name or (if no place name is available) by the longitude
and latitude.
RThe display of GPS information can be turned o by selecting OFF for LOCATION
INFO (P 85).
Location Signal
strength
P
-
MINATO, TOKYO, JAPAN

60 GPS
Recording GPS Data with Pictures
QUsing GPS increases the drain on the battery, causing battery performance to drop
at low temperatures.
QThe receiver may have an error of a few hundred meters (yards).
QThe camera may be unable to receive GPS data in some locations. If possible,
choose an outdoor location with few obstructions when turning the camera on.
QThe position recorded when a photo is taken may di er from the actual location if
some time has passed since the camera was last able to update GPS data.
QSelect OFF for LOCATION SEARCH (P 85) and TRACKING DATA (P 85) in the
R SET-UP menu when in a hospital and before takeo and landing if traveling
by air.
QPlace names are current as of the date on which the map database was created
(P 128) and will not be updated to re ect any changes after that date.
QComprehensive place name data are unavailable in some countries and regions. If
no name is available, the latitude and longitude will be displayed for a few seconds.
GPS
GPS
The camera may be unable to receive GPS data if the antenna (P 2) is obstructed or
when underground, underwater, under a bridge or overpass, inside a vehicle, build-
ing, tunnel, or metal briefcase, between tall buildings, or in the vicinity of cell phones
or other devices that broadcast in the 1.5 GHz band.
Obey all local regulations regarding the use of GPS devices. Note that the use of
GPS devices is restricted in some countries, including the People’s Republic of China.
Before going abroad, consult with the embassy or a travel agent. The camera may
display P (no signal) in locations in which restrictions apply.

61GPS
GPS Tracking
GPS Tracking
To record a GPS track log to a le on the memory card, select ON for R SET-UP>
TRACKING DATA (P 85; be sure the clock is set to the correct time and date as de-
scribed on page 16). A new log le is created when ON is selected and once every
24 hours thereafter. Note that the camera will continue to update GPS data even
when o , increasing the drain on the battery.
QGPS logs can be viewed in MyFinePix Studio.
QSee “GPS” (P 60) for information on using GPS.
QThe indicator lamp glows orange during recording GPS data even when the cam-
era is turned o while ON is selected. Select OFF before removing the battery or
memory card. Failure to observe this precaution could damage the card.
QSignal strength will be displayed in yellow and GPS data will not be logged if the
battery is low (B or less), no memory card is inserted, or the memory card has less
than 32 MB free. To resume the log, select ON after inserting a charged battery or a
memory card with more than 32 MB free.
QGPS tracking may be interrupted during movie recording and playback.
Using GPS to Set the Camera Clock
Using GPS to Set the Camera Clock
The AUTO TIME CORRECTION item in the R SET-UP menu can be used to syn-
chronize the camera clock to the time provided by GPS satellites. Select ON (W/o
SUMMERTIME) to set the clock to local standard time or ON (W/ SUMMERTIME) to
set the clock to local daylight saving time. If daylight saving time is in e ect, time will
automatically be advanced one hour.
QSelecting g LOCAL for N TIME DIFFERENCE turns AUTO TIME CORRECTION o . Note
that GPS may not provide the correct time in some locations; if necessary select OFF for
AUTO TIME CORRECTION and set the clock using
F
F
DATE/TIME
DATE/TIME (P 102).

62 GPS
Viewing GPS Data
Viewing GPS Data
During playback, pictures for which GPS data exist are in-
dicated by a J icon. GPS data are shown for a few sec-
onds each time the picture is displayed.
GPS icon
100-0001
100-0001
-
MINATO, TOKYO, JAPAN
Photo Navigation
Photo Navigation
To show the direction and distance from your present position to the location
where a picture was taken:
1
Select an option other than OFF for R SET-UP> LOCATION SEARCH and
con rm that the camera is receiving GPS data (P
93
).
2
Display a picture with a J icon.
3
Select R PHOTO NAVIGATION in the playback menu
(P 92). The approximate direction and distance to the loca-
tion where the picture was taken are displayed as shown,
using the units selected for R SET-UP> km/mile (P 93).
Distances over 1000 units are indicated by “>”, those under
100 units by “<”.
NE
<100
m
NE
<100
m
100-0001
100-0001
-
MINATO, TOKYO, JAPAN
RPhoto navigation ends when the next picture is displayed.

63GPS
Viewing GPS Data
Copying GPS Data to Other Images
Copying GPS Data to Other Images
GPS data can be copied from other pictures to images that lack correct GPS
information.
1
Display the source image for the GPS data.
2
Select R LOCATION INFO COPY in the playback menu (P 94).
3
Press the selector left or right to display the destination and press MENU/OK
to copy the data to the image.
QThe original GPS data can not be recovered.
QGPS data can not be deleted.
QThe camera may be unable to copy GPS data to or from images created on other
devices.

64 GPS
R
R
Landmark Navigator
Landmark Navigator
Landmark navigation uses GPS and the camera map da-
tabase to show information on objects the display (this is
sometimes known as “augmented reality,” or AR). To view
landmark information, select R LANDMARK NAVIGA-
TOR in the F-mode playback menu (P 92).
DIST:
20
m
NNNE
NNW
FUJIFILM
The display varies with camera orientation:
• For an “AR” display, hold the camera
with the lens pointed forward.
• For a “radar” display, hold the cam-
era with the lens pointed down.
DIST:
20
m
NNNENNW
FUJIFILM
DIST:
DIST:
20
m
FUJIFILM
m
RUse the zoom control to zoom in and out. To display additional information, press
the selector left or right to highlight landmarks and press MENU/OK. Press the selec-
tor down to choose the landmark type. Press DISP/BACK to return to playback or
press the shutter button halfway to exit to shooting mode.
RLandmarks can be added using RMY LANDMARK REGISTER (P 89).

65GPS
R Landmark Navigator
QLandmark information is based on the most recently-received GPS data; it is intend-
ed as a guide only and may be unavailable or contain errors under some conditions,
including when the camera is held upside down. Headings rely on a magnetic
compass and may not be correct if the camera is inside a building or vehicle or
close to metal objects, magnets, high-voltage power lines, or electrical equipment.
Calibration
Calibration
A f icon indicates that the camera’s internal sensor requires
calibration. Move the camera slowly in a large gure eight while
rotating your wrist as shown.
DIST:
20
m
NNNENNW
FUJIFILM
COMPASS FACES INTERFERENCE
ROTATE THE CAMERA AS FIGURE 8
If the icon does not clear from the display, choose a di erent location and try again.
QTo ensure that you do not drop the camera, use the strap (P1).

67Movies
Recording Movies
Taking Photographs During Recording
Taking Photographs During Recording
Press the shutter button to take a photograph during recording.
RIf O is selected for OIMAGE SIZE, the picture will be recorded at size P.
RThe photo is saved separately from the movie and does not appear as part of the movie.
QPhotos can not be taken while a high-speed movie is being recorded.
QThe indicator lamp lights while movies are being recorded. Do not open the bat-
tery chamber during shooting or while the indicator lamp is lit. Failure to observe
this precaution could prevent the movie from being played back.
QVertical or horizontal streaks may appear in movies containing very bright subjects.
This is normal and does not indicate a malfunction.
QThe temperature of the camera may rise if it is used to record movies for an ex-
tended period or if the ambient temperature is high. This is normal and does not
indicate a malfunction.
Movie Frame Size
Movie Frame Size
Before recording, select a frame size using the WMOVIE MODE option in the
shooting menu (P 91).
Option
Option
Description
Description
i 1920 (1920 × 1080) Full HD (High De nition).
h 1280
(1280 × 720)
High De nition.
f ( 640 × 480) Standard de nition.
k 640 × 480 (80 fps)High speed movie. Sound is not recorded, and focus, exposure, and white
balance are not adjusted automatically. Black bands appear at the top and
bottom of movies recorded at k 320 × 112.
k 320 × 240 (160 fps)
k 320 × 112 (320 fps)

69
Connections
Connections
Viewing Pictures on TV
Viewing Pictures on TV
Connect the camera to a TV to show pictures to a group.
1
Turn the camera o .
2
Connect the supplied A/V cable as shown below.
Insert into
USB multi-connector Connect yellow plug to video-in jack
Connect white plug to audio-in jack
RImage quality drops during movie playback.

70 Connections
Viewing Pictures on TV
Connecting the Camera to High De nition (HD) TVs
Connecting the Camera to High De nition (HD) TVs
An HDMI cable (available from third-party suppliers) can be used to connect the
camera to High De nition (HD) devices (playback only). The USB and A/V cables
can not be used while an HDMI cable is connected.
Insert into HDMI
connector
HDMI mini
connector Insert into HDMI
connector
RWhen an HDMI cable is connected, pictures and sound are played back on the TV.
QWhen connecting cables, be sure the connectors are fully inserted.
3
Tune the television to the video or HDMI input channel. See the documen-
tation supplied with the television for details.
4
Press the a button for about a second to turn the camera on. The camera
monitor turns o and pictures and movies are played back on the TV. Note
that the camera volume controls have no e ect on sounds played on the
TV; use the television volume controls to adjust the volume.

72 Connections
Printing Pictures via USB
6
Press MENU/OK to start printing. Printing can be interrupted by pressing
DISP/BACK, but note that some printers may not respond immediately. If the
printer stops before printing is complete, turn the camera o and then on
again.
7
After con rming that PRINTING has cleared from the camera display, turn
the camera o and disconnect the USB csable.
RPictures can be printed from internal memory or a memory card that has been
formatted in the camera.
RIf no pictures are selected, the camera will print one copy of the current picture.
RPage size, print quality, and border selections are made using the printer.
Printing the Date of Recording
Printing the Date of Recording
To print the date of recording on pictures, press DISP/BACK in the PictBridge display
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without
the date of recording, select PRINT WITHOUT DATE). Some printers do not support
date printing. See the printer manual for details.

75Connections
Viewing Pictures on a Computer
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where
they can be stored, viewed, organized, and printed. Before proceeding, install
the software as described below. Do NOT connect the camera to the computer
until installation is complete.
Windows: Installing MyFinePix Studio
Windows: Installing MyFinePix Studio
1
Con rm that the computer meets the following system requirements:
Windows 7 (SP 1)/Windows Vista (SP 2)
Windows 7 (SP 1)/Windows Vista (SP 2)
1
1
Windows XP (SP 3)
Windows XP (SP 3)
1
1
CPU
CPU
3 GHz Pentium 4 or better
3 GHz Pentium 4 or better
(2.4
(2.4
GHz Core 2 Duo or better)
GHz Core 2 Duo or better)
2
2
2 GHz Pentium 4 or better
2 GHz Pentium 4 or better
(2.4
(2.4
GHz Core 2 Duo or better)
GHz Core 2 Duo or better)
2
2
RAM
RAM
1 GB or more
1 GB or more
512 MB or more
512 MB or more
(1
(1
GB or more)
GB or more)
2
2
Free disk space
Free disk space
2 GB or more
2 GB or more
GPU
GPU
Supports DirectX 9 or later
Supports DirectX 9 or later
(
(
recommended
recommended
)
)
Supports DirectX 7 or later
Supports DirectX 7 or later
(
(
required; performance not guaranteed with other GPUs
required; performance not guaranteed with other GPUs
)
)
Video
Video 1,024 × 768 pixels or more with 24-bit color or better
Other
Other
• Built-in USB port recommended. Operation is not guaranteed with other
USB ports.
• Internet connection (broadband recommended) required to install
.NETFramework (if necessary), to use auto update feature, and when per-
forming such tasks as sharing pictures on-line or via e-mail.
1 Other versions of Windows are not supported. Only pre-installed operating systems are
supported; operation is not guaranteed on home-built computers or computers that have
been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.

76 Connections
Viewing Pictures on a Computer
2
Start the computer. Log in to an account with administrator privileges be-
fore proceeding.
3
Exit any applications that may be running and insert the installer CD in a
CD-ROM drive.
Windows 7/Windows Vista
Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dia-
log will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and
follow the on-screen instructions to install MyFinePix Studio and RAW FILE
CONVERTER.
If the Installer Does Not Start Automatically
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX
CD window and double-click setup or SETUP.EXE.

77Connections
Viewing Pictures on a Computer
4
If prompted to install Windows Media Player, DirectX, or .NETFramework,
follow the on-screen instructions to complete installation.
5
Remove the installer CD from the CD-ROM drive when installation is com-
plete. Store the installer CD in a dry location out of direct sunlight in case
you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera” (P 80).

78 Connections
Viewing Pictures on a Computer
Macintosh: Installing FinePixViewer
Macintosh: Installing FinePixViewer
1
Con rm that the computer meets the following system requirements:
CPU
CPU PowerPC or Intel (Core 2 Duo or better) *
OS
OS Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.
com/support/digital_cameras/compatibility/ for more information)
RAM
RAM 256 MB or more (1 GB or more) *
Free disk space
Free disk space A minimum of 200 MB required for installation with 400 MB available when
FinePixViewer is running
Video
Video 800 × 600 pixels or more with thousands of colors or better
Other
Other Built-in USB port recommended. Operation is not guaranteed with other USB
ports.
* Recommended when displaying HD movies.
2
After starting the computer and quitting any applications that may be run-
ning, insert the installer CD in a CD-ROM drive and double-click Installer
for Mac OS X.
RTo install RAW FILE CONVERTER, double-click SILKYRFCEXInstaller. RAW FILE
CONVERTER is used to view RAW images on your computer.
3
An installer dialog will be displayed; click Installing FinePixViewer to start
installation. Enter an administrator name and password when prompted
and click OK, then follow the on-screen instructions to install FinePixViewer.
Click Exit to quit the installer when installation is complete.

79Connections
Viewing Pictures on a Computer
4
Remove the installer CD from the CD-ROM drive. Note that you may be
unable to remove the CD if Safari is running; if necessary, quit Safari before
removing the CD. Store the installer CD in a dry location out of direct sun-
light in case you need to re-install the software.
5
Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,
and select Preferences… from the Image Capture application menu. The
Image Capture preferences dialog will be displayed; choose Other… in
the When a camera is connected, open menu, then select FPVBridge
in the “Applications/FinePixViewer” folder and click Open. Quit Image Cap-
ture.
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”
folder and start Image Capture. The camera will be listed under DEVICES;
select the camera and choose FPVBridge from the Connecting this cam-
era opens menu and click Choose. Quit Image Capture.
Installation is now complete. Proceed to “Connecting the Camera” (P 80).

82 Connections
Viewing Pictures on a Computer
Disconnecting the Camera
Disconnecting the Camera
After con rming that the indicator lamp is out, turn the camera o and disconnect
the USB cable.
Uninstalling the Supplied Software
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before begin-
ning reinstallation. After quitting the software and disconnecting the camera, drag
the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control panel and use “Programs and
Features” (Windows7/Windows Vista) or “Add or Remove Programs” (WindowsXP) to
uninstall MyFinePix Studio. Under Windows, one or more con rmation dialogs may
be displayed; read the contents carefully before clicking OK.

83
Menus
Menus
Using the Menus: Shooting Mode
Using the Menus: Shooting Mode
Use the F-mode and shooting menus to adjust shooting settings. The op-
tions available vary with the shooting mode selected.
Using the
Using the
F
F
-Mode Menu
-Mode Menu
To display F-mode menu shooting options, press the
F button in shooting mode. Highlight items and press
the selector right to view options, then highlight an op-
tion and press MENU/OK. Press DISP/BACK to exit when set-
tings are complete.
F
F
-Mode Menu Options
-Mode Menu Options
N
N
ISO
ISO
(
(
defaults to
defaults to
AUTO)
AUTO)
Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mot-
tling may appear in pictures taken at high sensitivities.
100
100
ISO
ISO
12800
12800
Bright
Bright
Scene
Scene
Dark
Dark
Less noticeable
Less noticeable
Noise (mottling)
Noise (mottling)
More noticeable
More noticeable
Option
Option
Description
Description
AUTO
AUTO
Sensitivity is adjusted automatically in response to shooting conditions.
AUTO (3200) / AUTO(1600) /
AUTO (3200) / AUTO(1600) /
AUTO(800) / AUTO(400)
AUTO(800) / AUTO(400)
As above, except that sensitivity will not be raised above the value in
parentheses.
12800 / 6400 / 3200 / 1600 /
12800 / 6400 / 3200 / 1600 /
800 / 400 / 200 / 100
800 / 400 / 200 / 100 Sensitivity is set to the speci ed value, which is shown in the display.

84 Menus
Using the Menus: Shooting Mode
O
O
IMAGE SIZE
IMAGE SIZE
(
(
defaults to
defaults to
O
O
4:3)
4:3)
Choose the image size and aspect ratio at which pictures are record-
ed. Large pictures can be printed at large sizes with no drop in quality,
while small pictures require less memory, allowing more pictures to be
recorded.
O
O
4 : 3
4 : 3
Size Aspect ratio
Size Versus Aspect Ratio
Size Versus Aspect Ratio
Size
Size
Option
Option
Prints at sizes up to
Prints at sizes up to
O
O34 × 25 cm (13.5 × 10 in.)
P
P24 × 18 cm (9.5 × 7 in.)
Q
Q17 × 13 cm (7 × 5 in.)
Aspect ratio
Aspect ratio
4 : 3: Pictures have the same
proportions as the camera
display.
3 : 2: Pictures have the same
proportions as a frame of
35 mm lm.
16 : 9: Suited for display on
High De nition (HD) devices.
3
3
4
4
2
2
3
3
9
9
16
16
Produkt Specifikationer
Mærke: | Fuji |
Kategori: | Digital kamera |
Model: | Finepix F600EXR |
Har du brug for hjælp?
Hvis du har brug for hjælp til Fuji Finepix F600EXR stil et spørgsmål nedenfor, og andre brugere vil svare dig
Digital kamera Fuji Manualer
23 August 2024
23 August 2024
22 August 2024
22 August 2024
21 August 2024
20 August 2024
20 August 2024
19 August 2024
18 August 2024
17 August 2024
Digital kamera Manualer
- Minolta
- Aiptek
- Insta360
- Olympus
- Technaxx
- Digital Blue
- Ricoh
- Argus
- Panasonic
- Gembird
- Wanscam
- Toshiba
- Revue
- BlackVue
- GoPro
Nyeste Digital kamera Manualer
15 Januar 2025
15 Januar 2025
15 Januar 2025
12 Januar 2025
12 Januar 2025
12 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025