Gamdias Athena P3 Manual


Læs gratis den danske manual til Gamdias Athena P3 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Gamdias Athena P3, eller vil du spørge andre brugere om produktet?

Side 1/2
LED SWITCH
Front I/O cables
SATA Cable LED Switch Button Cable ARGB Cable PWM Cable
1. Lightly touch the LED button on the case to switch lighting effects.
2. Press and hold the LED button on the case to enter motherboard sync mode.
3. In motherboard sync mode, lightly touch the button to exit motherboard sync mode.
Motherboard Installation (hidden connector)
01 02 01 02
Case Layout and Parts Identification
Power Supply Unit (PSU) InstallationPackage Contents
ATHENA
I
P3
MID-Tower PC Case
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Ensure compatibility of all non-power connectors, RGB, USB, and fan controls.
Front I/O cables
Motherboard
Motherboard
Control Box
Motherboard
Motherboard Motherboard
IO Panel
LED Switch
Button Cable
HD Audio
Power Switch
USB 3.1 (Type C)
USB 3.0 ARGB Cable
LED Switch Button
1. Front Panel
2. Tempered Glass Panel
3. Top Dust Filter
4. Top Swappable Panel
5. Right Side Panel
6. Rear Fan
7. PCIe Slot Cover
8. IO Port Module
9. Front Fans
10. HDD/ SSD Cage
11. SSD Cage
12. Fan Hub
13. Bottom Dust Filter
14. Chassis Pedestals
1. Gaming Case : ATHENA P3
2. Chassis Protection : EPS Protection Foam
3. Chassis Dust Cover
4. Preinstalled Fans : Front 3 x 140mm PWM Fans Rear:1 x 120mm PWM Fans
6. Accessory Box :
A. Motherboard/ SSD screws (22)--------------------------------------------------------------
B. Motherboard additional standoffs (3)------------------------------------------------------
C. PSU/ GPU PCIe screws (6)-----------------------------------------------------------------------
D. HDD cage screws (9)---------------------------------------------------------------------------------
E. Fan screws (12)------------------------------------------------------------------------------------------
F. Motherboard Stand-off removal tool (1) --------------------------------------------------
G. Zip ties (5)--------------------------------------------------------------------------------------------------
H. Card Buckle (2) ------------------------------------------------------------------------------------------
ARGB Port
ARGB Cable Port
SATA Cable Port
PWM Cable Port
LED Switch Button
Cable Port
LED
Fan and Cooling System Setup
Fan and Cooling System Setup Fan and Cooling System Setup
https://www.gamdias.com
GPU Installation
GPU Installation
01 03
2.5" HDD/SDD Installation
3.5" & 2.5" HDD/SDD Installation
01
01
0202-1 02-2


Produkt Specifikationer

Mærke: Gamdias
Kategori: Ikke kategoriseret
Model: Athena P3

Har du brug for hjælp?

Hvis du har brug for hjælp til Gamdias Athena P3 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Gamdias Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer