Gamdias Talos E3 CG Manual

Gamdias Ikke kategoriseret Talos E3 CG

Læs gratis den danske manual til Gamdias Talos E3 CG (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Gamdias Talos E3 CG, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Case Layout and Parts Identification Fan Cable

Safety Information Case Layout and Parts Identification

Case Layout and Parts Identification

Motherboard Installation Power Supply Unit (PSU) Installation

TALOS

C G

MID-Tower PC Case

1. General Safety Warnings

Always ensure the computer case is placed on a stable, flat surface to prevent it from tipping over.

Keep the case away from water, moisture, or high humidity environments to avoid electrical hazards.

Do not block or obstruct the ventilation openings to ensure proper airflow and prevent overheating.

2. Electrical Safety

Disconnect the power supply before installing or modifying any internal components.

Avoid touching internal components directly; always ground yourself to prevent static discharge, which can

damage sensitive components.

Use only compatible power supplies and cables, ensuring that all connections are secure and free from

fraying or damage.

3. Handling Precautions

Handle the computer case with care during transportation to prevent physical damage.

Use appropriate tools when assembling or disassembling components inside the case to avoid injury.

Do not force components into place; ensure they align properly before securing them.

4. Fire Hazard Warnings

Ensure all components are properly ventilated and not overheating, as this can be a potential fire hazard.

Avoid overloading electrical circuits connected to the computer case to prevent overheating and potential

fire risks.

Keep flammable materials away from the computer case.

5. Child Safety

Keep the computer case and its components out of reach of children.

Do not allow children to play with or operate the computer case, especially when it is powered on.

6. Cleaning and Maintenance

Unplug the computer case from the power source before cleaning.

Use a dry, soft cloth for cleaning the exterior of the case. Do not use liquid cleaners or aerosols.

Periodically check and clean the ventilation openings to ensure proper airflow.

7. Installation Safety

Ensure that all components are installed correctly and securely before powering on the system.

Double-check connections and screws to prevent potential hazards during operation.

Follow the manufacturer's guidelines for component installation and ensure compatibility with the case.

8. Disposal Instructions

Dispose of the computer case and its components according to local electronic waste regulations.

01 0201 02

Place the standoffs in the appropriate

positions for your motherboard size.

Align the motherboard with the standoffs and

secure it with screws.

SATA Cable

PSU

LED Switch Button Cable

ARGB Cable

Slide the PSU into the bottom compartment. Secure the PSU with screws and connect the

power cables to the motherboard.

1. Gaming Case : TALOS E3 CG

2. Chassis Protection : EPS Protection Foam

3. Chassis Dust Cover

4. Preinstalled Fans : GAMDIAS NOTUS Fans x 3

5. Accessory Box : Screws and Standoffs

A. Motherboard/ SSD screws --------------------------------------------------------------------

B. Motherboard additional standoffs ----------------------------------------------------------

C. PSU/ GPU PCIe screws ---------------------------------------------------------------------------

D. HDD cage screws ------------------------------------------------------------------------------------

E. Cable ties --------------------------------------------------------------------------------------------------

6. Accessory Box : Cable Ties

1. Case Type: MID Tower

2. Motherboard Support: ATX, Micro-ATX, Mini-ITX

3. Expansion Slots: 7

4. Material: SPCC, ABS, Tempered Glass

5. Product Dimension : 363 x 210 x 447mm(14.3 x 8.3 x 17.6 inch)

6. Chassis Dimension : 330 x 210 x 430mm(13 x 8.3 x 16.9 inch)

7. Radiator Support : Top: 240 mm Front: 360mm, 280mm Rear:120 mm、、

8. Fan Support : Top: 2 x 120mm Front : 2 x 120 mm , 2 x 140mm Rear: 1 x 120mm、、

9. Motherboard Sync : 5V 3-Pin Addressable Header

10. Drive Bays : 2 x 3.5" or 1 x 2.5"+1 x 3.5"(HDD Cage) 2 x 2.5"、

11. Clearence : CPU cooler height limitation: 160mm VGA length limitation: 300mm、、

PSU length limitation: 150mm

1. Front Panel

2. Top Megnetic Dust Filter

3. IO Port Module

4. Top Radiator (Fan) Mounting Holes

5. Right Side Panel

6. Left Side Tempered Glass

7. PCIe Slots

8. Power Supply Unit Mounting Hole

9. Power Shroud

10. Power Shroud Fan Mounting Hole

11. Rear Fan

12. Front Fans

13. Motherboard Placement

14. Motherboard Mounting Holes

15. HDD/ SSD Cage

16. Chassis Pedestals

LED SWITCH

HDD Installation SSD Installation Fan and Cooling System Setup Case Layout and Parts Identification

Safety Information Case Layout and Parts Identification GPU Installation GPU Installation

01 02 03

Motherboard

Control Box

Motherboard

IO Panel

01 B

Identify the appropriate drive bay in your case

for the hard drive.

Verify compatibility for installing additional fans if needed,

following the airflow direction for optimal cooling.

If using liquid cooling, mount the radiator and connect the

pump.

Identify the PCI-E p2-x16 slot on the motherboard, usually the largest slot, closest to the CPU.

Align the graphics card s connector with the PCI-E slot and gently press down until the card is firmly seated in the slot. ’

Secure the card to the case with screws

Attach the grouped cables to the case s cable management points. Ensure that the cables are not obstructing any ’

airflow or components

Use additional zip ties or Velcro straps to secure any loose or excess cables. You can also use cable management

1. Lightly touch the LED button on the case to switch lighting effects.

2. Press and hold the LED button on the case to enter motherboard sync mode.

3. In motherboard sync mode, lightly touch the button to exit motherboard sync mode.

ARGB Cable

LED Switch Button

Troubleshooting and Maintenance

•Regularly clean the dust filters and fans to maintain airflow.

•Check all connections if the system is not powering on.

Warranty and Support Information

•Provide details on the warranty period and how to contact support for assistance

LED Switch

Button Cable

HD Audio

Power Switch

USB 3.0

https://www.gamdias.com

A-01

A-02

Produkt Specifikationer

Mærke:	Gamdias
Kategori:	Ikke kategoriseret
Model:	Talos E3 CG

Har du brug for hjælp?

Hvis du har brug for hjælp til Gamdias Talos E3 CG stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Gamdias Manualer

Gamdias Atlas E1 Manual

20 August 2025

Gamdias Atlas M3M Manual

19 August 2025

Gamdias Chione P5-240 Manual

15 Juli 2025

Gamdias Chione P5-360 Manual

14 Juli 2025

Gamdias Aether M1 Manual

5 Juli 2025

Gamdias Aether P1 Manual

5 Juli 2025

Gamdias Atlas E2 Cg Manual

24 Juni 2025

Gamdias Helios P2A-1300G Manual

20 Juni 2025

Gamdias Athena P3 Manual

18 Juni 2025

Gamdias Apollo E2 Elite Manual

30 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

VIZIO SmartCast M75-E1 Manual

27 August 2025

Prince Castle 740-T4 Manual

27 August 2025

ENTES EMR-53SL Manual

27 August 2025

Minix RIC SJ64-8 Manual

27 August 2025

Milwaukee M18 3019-21PS Manual

27 August 2025

ENTES RGI-12W Manual

27 August 2025

Crestron IV-SAM-VX2-S Manual

27 August 2025

SABO BC-250 PRO Manual

27 August 2025

ENTES DCA-11C Manual

27 August 2025

Russell Hobbs Desire 27140-56 Manual

27 August 2025