GE GPF425W Manual

GE Opvaskemaskine GPF425W

Læs gratis den danske manual til GE GPF425W (8 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 23 anmeldelser. Har du et spørgsmål om GE GPF425W, eller vil du spørge andre brugere om produktet?

Side 1/8
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANTSave these instruc-
tions for local inspector’s use.
IMPORTANT – Observe all governing
codes and ordinances.
Note to InstallerBe sure to leave these
instructions with the Consumer.
Note to ConsumerKeep these instructions
with your Owner’s Manual for future
reference.
Installation
Instructions
1/4" Custom Dishwasher
Door and Access Panel Kit
GPF425 Series Kit
GPF425A-Almond Trim Kit, GPF425B-Black Trim Kit,
GPF425C-Bisque Trim Kit, GPF425W-White Trim Kit
WARNING:
To prevent electric shock, disconnect electri-
cal power supply to dishwasher before
changing panels. Do not operate dishwasher
while changing panels or when lower access
panel assembly is removed.
TOOLS AND MATERIALS REQUIRED:
1/4" socket driver
Phillips screwdriver
• Electric drill
1/8" drill bit
Masking tape
• Safety glasses
• Gloves to protect against sharp edges
KIT INCLUDES:
Left, right and bottom door trim
Top and bottom access panel trim
Color matched screws
STOP
INSTALLATION OPTIONS
This trim kit is designed to accommodate 1/4"
thick panels. A raised panel screwed or glued to
1/4" thick backing can be used. The raised
portion of the panel must be fabricated to
permit clearances for the trim on all sides.
“X” Clearance shown at the bottom of the
raised panel must be maintained to prevent
the door from striking the access panel when
opened.
Appearance Total “X”
Panel Backing Thickness Clearance
3/4" 1/4" 1" 2"
1/2" 1/4" 3/4" 1-7/8"
A 3/4" thick custom panel may be installed by
routing the top and sides to 1/4" thickness. The
bottom edge, Dimension “X”, should be 1-1/2"
high and 1/4" thick.
IMPORTANT!
GPF100 Dishwasher Door Spring Kit
MUST BE installed when custom
door panels weigh 4 pounds or more.
18-7/8"
1/4" Min. Clearance
23-9/16"
Appearance
Panel
1/4"
Thick
Panel 1/8" Min.
Clearance
1/8" Min.
Clearance
X
Clearance
3-11/16"
1/4" Min. Clearance
All Sides
29-9/16"
Access Panel
2 REMOVE LOWER ACCESS
PANEL ASSEMBLY
Remove the two screws below the
access panel. Retain screws.
Loosen the two screws located
between the door and the access
panel. Do not attempt to remove
these screws. They are secured to
the access panel with washers.
Remove the access panel assembly
from the dishwasher.
Remove the toekick and set aside.
NOTE: Do not remove the insulation
behind the access panel or toekick.
1 CUT 1/4" THICK CUSTOM
PANELS TO SIZE
Cut door panel and access panel to the
dimensions shown.
NOTE: The trim provided will conceal the cut
edges of the panels.
2
1/4" Thick
Door Panel
23-9/16"
3-11/16"
19-3/4"
1/4" Thick Access Panel
Loosen 2 Screws
Escutcheon
Door
Panel
Access Panel
Toekick


Produkt Specifikationer

Mærke: GE
Kategori: Opvaskemaskine
Model: GPF425W

Har du brug for hjælp?

Hvis du har brug for hjælp til GE GPF425W stil et spørgsmål nedenfor, og andre brugere vil svare dig




Opvaskemaskine GE Manualer

GE

GE PDW1800KBB Manual

9 Januar 2025
GE

GE GSD5360 Manual

9 Januar 2025
GE

GE GSD5132 Manual

9 Januar 2025
GE

GE GDF520PSJSS Manual

9 December 2024
GE

GE GDF520PGJWW Manual

9 December 2024
GE

GE CDT865SMJDS Manual

9 December 2024
GE

GE GDF510PMJSA Manual

9 December 2024
GE

GE GSD5122 Manual

9 December 2024
GE

GE GSD4060KSS Manual

9 December 2024
GE

GE GSD4010 Manual

9 December 2024

Opvaskemaskine Manualer

Nyeste Opvaskemaskine Manualer