GE JSP46DNBB Manual

GE Komfur JSP46DNBB

Læs nedenfor 📖 manual på dansk for GE JSP46DNBB (20 sider) i kategorien Komfur. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/20
1
MATERIALS YOU MAY NEED
3-Wire Cord
4 long
(UL Approved 40 or 50 AMP)
Lag Bolts Anchor Sleeves
(For Anti-Tip Bracket Mounted
on Concrete Floors Only)
4-Wire Cord
4 long
OR
If you have questions, call 1.800.GE.CARES or visit our website at:
ge.com
Self-Cleaning Radiant
Electric Slide-In Range
Installation
Instructions JSP42, JS968, JS900, JS905, JSP46
31-10621-3 09-08 JR
Before You Begin
Read these instructions carefully and completely.
IMPORTANT—Save these
instructions for local inspectors use.
IMPORTANT—Observe all
governing codes and ordinances.
Note to Installer—Be sure to leave these
instructions with the consumer.
Note to Consumer—Keep these
instructions for future reference.
Proper installation is the responsibility
of the installer and product failure due
to improper installation is NOT covered
under warranty.
NOTE—This appliance must be properly
grounded.
PARTS INCLUDED
Anti-Tip BracketScrews
Rear Filler
2 Screws
TOOLS YOU WILL NEED
1/8 Drill Bit and
Electric or Hand Drill
1/4 Nut Driver
Level
Tape Measure
Straight Edge
or Square
Hand or Sabre Saw
Pencil
Safety Glasses
Wrench or Pliers
(for 1-7/16 Nut)
Pliers
Tin Snips
Squeeze Connector
(For Conduit
Installations Only)


Produkt Specifikationer

Mærke: GE
Kategori: Komfur
Model: JSP46DNBB

Har du brug for hjælp?

Hvis du har brug for hjælp til GE JSP46DNBB stil et spørgsmål nedenfor, og andre brugere vil svare dig




Komfur GE Manualer

Komfur Manualer

Nyeste Komfur Manualer