GE Profile JGP975BEKBB Manual

GE Komfur Profile JGP975BEKBB

Læs gratis den danske manual til GE Profile JGP975BEKBB (32 sider) i kategorien Komfur. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om GE Profile JGP975BEKBB, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/32
1
31-10612-4 (10-10 GE)
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca

″


Read these instructions completely
and carefully.
• Save these instructions
for local inspector’s use.
• Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Product failure due to improper installation is not
covered under the Warranty.
 This appliance must be
properly grounded.
•
 Leak testing of the
appliance shall be conducted according to the
manufacturer’s instructions.
• Proper installation is the responsibility
of the installer and product failure due to
improper installation is NOT covered under
warranty.


• This product must be installed by a licensed
plumber or gas fitter.
• When using ball-type gas shut-off valves, they
shall be the T-handle type.
• A flexible gas connector, when used, must not
exceed 3 feet.
JGP628, JGP630, JGP963, JGP970,
JGP975, ZGU36

 If the information
in this manual is not followed exactly, a fire,
explosion or gas leak may result causing property
damage, personal injury or death.
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance!


• Do not try to light any appliance. Do not touch
any electrical switch; do not use any phone in
your building.
• Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
• If you cannot reach your gas supplier, call the fire
department.
Installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
This cooktop has been design certified
by CSA International. You’ll find safety precautions
in your Owner’s Manual.
Read them carefully.
• Installation of this cooktop must conform with
local codes or, in the absence of local codes with
the National Fuel Gas Code, ANSI Z223.1/NFPA
54–Latest edition.
• Be sure your cooktop is installed properly by a
qualified installer or service technician.
• To eliminate reaching over surface burners,
cabinet storage above burner should be avoided.
• Do not install the unit near an outside door or
where a draft may affect its use.
 Disconnect all electrical
power at the main circuit breaker
or fuse box before installing.
2



This appliance must be supplied with the proper
voltage and frequency and connected to an
individual, properly grounded branch circuit,
protected by a circuit breaker or fuse having
amperage as noted on the rating plate.
We recommend you have the electrical wiring and
hookup of your cooktop connected by a qualified
electrician. After installation, have the electrician
show you where your main cooktop disconnect is
located.
Check with your local utilities for electrical codes
which apply in your area. Failure to wire your
cooktop according to governing codes could result
in a hazardous condition.
If there are no codes, your cooktop must be wired
and fused to meet the requirements of the National
Electrical Code, ANSI/NFPA No. 70—Latest edition.
You can get a copy by writing:
National Fire Protection Association
Batterymarch Park
Quincy, MA 02269
In Canada your cooktop must be wired and fused
to meet the requirements of the Canadian Electrical
Code.
Be sure the installation of this product in a mobile
home conforms with the Manufactured Home
Construction and
Safety Standard, Title 24 CFR, Part 3280.
If this standard does not apply, you must follow
the standard for Manufactured Home Installations,
ANSI A225.1 and Manufactured Home Installations,
Sites and Communities and ANSI/NFPA 501A or
with local codes.
You can get a copy of the Federal Standard by
Writing:
Office of Mobile Home Standards
HUD Building
451 7th Street, S.W.
Washington, D.C. 24010




2 Hold
Down Brackets
Shut-Off ValvePipe Fittings
CSA-Approved Flexible Gas Line
3/8 Min. ID, 1/2 NPT Connection, ″ ″
3-foot Maximum Length (Massachusetts Only)
Joint Sealant
Saber Saw
Pencil
Safety Glasses
1/8 Drill Bit & Electric or ″
Hand Drill
Ruler or Straightedge
Foam Tape
(Glass Top
Models Only)
2 Screws
Phillips-Head
Screwdriver
Pipe Wrench

Produkt Specifikationer

Mærke: GE
Kategori: Komfur
Model: Profile JGP975BEKBB

Har du brug for hjælp?

Hvis du har brug for hjælp til GE Profile JGP975BEKBB stil et spørgsmål nedenfor, og andre brugere vil svare dig


Komfur GE Manualer

GE

GE UX12B30PSS Manual

13 August 2025
GE

GE Profile PLS624ETSB Manual

7 August 2025
GE

GE Profile PLU621ETSB Manual

7 August 2025
GE

GE Profile PLU612DTBB Manual

7 August 2025
GE

GE JP3030SWSS Manual

7 August 2025
GE

GE JGB720DEJWW Manual

7 August 2025
GE

GE JP3030TWWW Manual

7 August 2025
GE

GE GGS60LAVFS Manual

7 August 2025
GE

GE JXPROBE1 Manual

7 August 2025
GE

GE Café CXPR6HKPTBT Manual

7 August 2025

Komfur Manualer

Nyeste Komfur Manualer

Candy

Candy CVG6B LPG Manual

14 August 2025
Hoover

Hoover HIFS954MCTT Manual

14 August 2025
Hisense

Hisense I6456CB Manual

14 August 2025
Hisense

Hisense HI6421BSC Manual

14 August 2025
Hisense

Hisense HI8421BSC Manual

14 August 2025
Sharp

Sharp SCH3043GB Manual

14 August 2025
Hoover

Hoover H-HOB 500 HTP634DB3N Manual

14 August 2025
Hisense

Hisense HAS949BSC Manual

14 August 2025
Hisense

Hisense GM642XHS Manual

14 August 2025
Adler

Adler AD 6520 Manual

13 August 2025