GE Profile JP910BKBB Manual

GE Komfur Profile JP910BKBB

Læs nedenfor 📖 manual på dansk for GE Profile JP910BKBB (8 sider) i kategorien Komfur. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/8
1
TOOLS YOU WILL NEED
MATERIALS YOU WILL NEED
31-10603 (12-04 JR)
Installation
30Electric Cooktop
Instructions
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT Save these
instructions for local inspectors use.
IMPORTANT Observe all
governing codes and ordinances.
Note to Installer Be sure to leave these
instructions with the Consumer.
Note to Consumer Keep these
instructions for future reference.
Product failure due to improper installation
is not covered under the Warranty.
WARNING This appliance must
be properly grounded.
ATTENTION INSTALLER
ALL COOKTOPS MUST BE HARD WIRED
(DIRECT WIRED) INTO AN APPROVED
JUNCTION BOX. A “PLUG AND
RECEPTACLE” IS NOT PERMITTED ON
THESE PRODUCTS.
Proper installation is the responsibility
of the installer and product failure due to
improper installation is NOT covered under
warranty.
PARTS INCLUDED
Wire Nuts
Junction Box
Saber Saw
Pencil
Safety Glasses
1/8Drill Bit & Electric
or Hand Drill
Ruler or Straightedge
Phillips Head
Screwdriver
JP340, JP355, JP910, JP930, JP940, JP950
“If you have questions, call 800.GE.CARES or visit our website at:
www.GEAppliances.com”
2 Hold Down
Brackets
4 Screws Foam Tape


Produkt Specifikationer

Mærke: GE
Kategori: Komfur
Model: Profile JP910BKBB

Har du brug for hjælp?

Hvis du har brug for hjælp til GE Profile JP910BKBB stil et spørgsmål nedenfor, og andre brugere vil svare dig




Komfur GE Manualer

Komfur Manualer

Nyeste Komfur Manualer