Genelec 1236A Manual

Genelec Højttaler 1236A

Læs gratis den danske manual til Genelec 1236A (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Genelec 1236A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Genelec 1236A

Smart Active Monitor

Operating Manual

1236A

Genelec 1236A Operating Manual

Introduction

Congratulations and thank you for

choosing Genelec!

Since 1978, Genelec has been guided

by a single idea – to make perfect

active monitors that deliver neutral and

accurate sound in every kind of acoustical

environment. In Genelec’s quest for this

ultimate goal, our unrivalled commitment

to research and development has led us

to continuously develop innovative driver

technology, electronic circuitry, enclosure

designs and more. Our design philosophy is

based on sustainability and environmental

values, where industrial design serves our

products' acoustical performance.

Your Genelec product has been designed

and manufactured with care in our factory,

in Finland, using environmentally ecient

solutions to give you reliable operation

over many years.

Please take the time to read this manual.

Happy monitoring!

General Description

The Genelec 1236A Smart Active Monitor

is designed for neutral sound reproduction

at high SPL in large control rooms. The

system comprises of a 430 litre enclosure

and a RAM-XL 19 in 3U rack mount

amplier unit.

The monitor enclosure contains two 458

mm (18 in) bass drivers, two 130 mm (5 in)

midranges, and a 50 mm (2 in) compression

driver into a 25 mm (1 in) throat for treble

frequencies. The midrange and treble

drivers are mounted in a Genelec Directivity

Control Waveguide™ (DCW™) which

can be rotated through ±90° for either

horizontal or vertical mounting. The system

low frequency response extends down

to 17.5 Hz (-6 dB). The high frequency

response extends up to 21 kHz (-6 dB).

Digital signal processing in the RAM-XL

amplier unit is done with high precision

algorithms, and includes driver and

amplifier overload protection. The room

response compensations include highly

exible parametric lters, level alignment,

and acoustic delay compensation. These

allow accurate matching to all console

output sections and room acoustics.

The power amplifiers of the RAM-XL

produce 2 x 1000 W, 2 x 400 W and 250 W

of short term power in the bass, midrange,

and treble channels respectively.

Delivery Content

The Genelec 1236A Smart Active Monitor is

shipped in a box containing an enclosure,

an individually calibrated RAM-XL amplier

unit, a mains connecting cable, an RJ45

cable and one Allen key.

Before installing the system, check

all items for damage and omissions. If

damage is found, contact directly the

distributor and insurance agent. If there

are any missing components, contact your

local dealer.

Cables and Connectors

Each 1236A is delivered with the following

cable kit:

• One mains cable

• Two 10 m (32 ft 9 in) 4-pole Speakon

cables

• One 10 m (32 ft 9 in) RJ45 cable

• One 5 m (16 ft 4 in) RJ 45 cable

The 10 m cables are designed to go

between the amplifier and the monitor

enclosure. If you need to make custom

length cables for this, please connect the

Speakon cables pin to pin and see Table 1

for recommended wire gauges.

Amplifier Positioning

The RAM-XL amplifier is encased in a

standard 19" 3U rack case. The cooling

system circulates air into the amplifier

from behind, so that it exits through the

openings on the right side. Free flow of

fresh air must be ensured and the space

around the amplier must be suciently

ventilated to dissipate accumulating heat

so that the temperature does not rise

above 15-35 degrees Celsius (50-95°F). If

the system overheats it will stop operating

until a safe temperature is reached.

Make sure that the amplier is positioned

so that the monitor connecting cables will

reach. A space 100 mm (4 in) deep should

be left behind the rear panel of the amplier

unit to allow for the cable connectors and

air circulation.

The RAM-XL amplier is compatible with

mains voltage supply of 100 - 120 VAC and

220 - 240 VAC 50/60 Hz.

Operating Environment

These monitors and their RAM-XL

amplifiers are designed for indoor use

only. The permissible ambient temperature

is 15-35 degrees Celsius (50-95°F) and

permissible relative humidity between

20% and 80%. Humidity condensation on

the product is not allowed during use. For

instance, if the product has been stored or

transported in a cool environment and then

taken into a warm room, it must be allowed

to warm up to the ambient temperature

before connecting to mains power.

Aligning the DCW

The 1236A monitor is designed to be ush

mounted in either the vertical or horizontal

conguration. The DCW should be rotated

so that the treble and midrange drivers

align vertically. This ensures that optimum

stereo symmetry is obtained.

IMPORTANT-The DCW plate is heavy,

care must therefore be taken when

removing and replacing the DCW. To rotate

the DCW plate, proceed as follows:

• Place the monitor in its intended

listening orientation.

• Unscrew the eight M5 xing screws on

the edges of the plate using a 4 mm

Allen key.

• Carefully pull the plate a small distance

away from the enclosure. Rotate the

DCW so that the midrange and treble

drivers are aligned vertically (treble

driver on top) and remount the DCW

plate reversing the procedure above.

Flush Mounting of the

Enclosure

Although the 1236A may be used

successfully as a free standing monitor,

ush mounting is strongly recommended

for acoustical reasons. Flush mounting

improves the bass response and eciency

and also enhances the midrange transient

Produkt Specifikationer

Mærke:	Genelec
Kategori:	Højttaler
Model:	1236A

Har du brug for hjælp?

Hvis du har brug for hjælp til Genelec 1236A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Genelec Manualer

Genelec 8381A Manual

15 November 2024

Genelec 8010 APM Manual

30 September 2024

Genelec 8020D Manual

27 September 2024

Genelec 8020B Manual

9 September 2024

Genelec 3440A Manual

5 September 2024

Genelec 8010 AW Manual

10 August 2024

Genelec 8040A Manual

9 August 2024

Genelec 8050B Manual

8 August 2024

Genelec 8050A Manual

4 August 2024

Genelec 8320AWM Manual

4 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

DS18 JL-SBAR.HT Manual

17 Juni 2025

DS18 JK-SBAR22 Manual

17 Juni 2025

DS18 JK-SBAR.HT Manual

17 Juni 2025

Hama Speaker Stand 220882 Manual

17 Juni 2025

DS18 PRO-SM69.2 Manual

17 Juni 2025

DS18 NXL-IQ6 Manual

17 Juni 2025

DS18 NXL-IQ8 Manual

17 Juni 2025

Kodak PWS-2246 Manual

17 Juni 2025

DS18 PRO-TWN5 Manual

17 Juni 2025

DS18 PRO-CF69.4NR Manual

16 Juni 2025